Skip to contentSkip to conversation

regulator: core: Add debugfs to show constraint flags

PATCH In review Richard Fitzgerald 2 participants 2 messages Apr 21, 2016 – Apr 22, 2016 Voltage and current regulator framework

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 regulator: core: Add debugfs to show constraint flags

There are debugfs entries for voltage and current, but not for the constraint flags. It's useful for debugging to be able to see what these flags are so this patch adds a new debugfs file. We can't use debugfs_create_bool for this because the flags are bitfields, so as this needs a special read callback they have been collected into a single file that lists all the flags.

---
 drivers/regulator/core.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
drivers/regulator/core.c +52 -0
index e0b7642..7338175 100644
@@ -1272,6 +1272,55 @@ static void unset_regulator_supplies(struct regulator_dev *rdev)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+static ssize_t constraint_flags_read_file(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	const struct regulator *regulator = file->private_data;
+	const struct regulation_constraints *c = regulator->rdev->constraints;
+	char *buf;
+	ssize_t ret;
+
+	if (!c)
+		return 0;
+
+	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = snprintf(buf, PAGE_SIZE,
+			"always_on: %u\n"
+			"boot_on: %u\n"
+			"apply_uV: %u\n"
+			"ramp_disable: %u\n"
+			"soft_start: %u\n"
+			"pull_down: %u\n"
+			"over_current_protection: %u\n",
+			c->always_on,
+			c->boot_on,
+			c->apply_uV,
+			c->ramp_disable,
+			c->soft_start,
+			c->pull_down,
+			c->over_current_protection);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	kfree(buf);
+
+	return ret;
+}
+
+#endif
+
+static const struct file_operations constraint_flags_fops = {
+#ifdef CONFIG_DEBUG_FS
+	.open = simple_open,
+	.read = constraint_flags_read_file,
+	.llseek = default_llseek,
+#endif
+};
+
 #define REG_STR_SIZE	64
 
 static struct regulator *create_regulator(struct regulator_dev *rdev,
@@ -1327,6 +1376,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 				   &regulator->min_uV);
 		debugfs_create_u32("max_uV", 0444, regulator->debugfs,
 				   &regulator->max_uV);
+		debugfs_create_file("constraint_flags", 0444,
+				    regulator->debugfs, regulator,
+				    &constraint_flags_fops);
 	}
 
 	/*
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Applied "regulator: core: Add debugfs to show constraint flags" to the regulator tree

The patch

regulator: core: Add debugfs to show constraint flags

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 2d80a91b2f2a96f38877bc328dac135d69564911 Mon Sep 17 00:00:00 2001

From: Richard Fitzgerald <[email protected]>
Date: Thu, 21 Apr 2016 17:23:21 +0100
Subject: [PATCH] regulator: core: Add debugfs to show constraint flags

There are debugfs entries for voltage and current, but not for the constraint flags. It's useful for debugging to be able to see what these flags are so this patch adds a new debugfs file. We can't use debugfs_create_bool for this because the flags are bitfields, so as this needs a special read callback they have been collected into a single file that lists all the flags.

---
 drivers/regulator/core.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
drivers/regulator/core.c +52 -0
index e0b764284773..73381752ff78 100644
@@ -1272,6 +1272,55 @@ static void unset_regulator_supplies(struct regulator_dev *rdev)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+static ssize_t constraint_flags_read_file(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	const struct regulator *regulator = file->private_data;
+	const struct regulation_constraints *c = regulator->rdev->constraints;
+	char *buf;
+	ssize_t ret;
+
+	if (!c)
+		return 0;
+
+	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = snprintf(buf, PAGE_SIZE,
+			"always_on: %u\n"
+			"boot_on: %u\n"
+			"apply_uV: %u\n"
+			"ramp_disable: %u\n"
+			"soft_start: %u\n"
+			"pull_down: %u\n"
+			"over_current_protection: %u\n",
+			c->always_on,
+			c->boot_on,
+			c->apply_uV,
+			c->ramp_disable,
+			c->soft_start,
+			c->pull_down,
+			c->over_current_protection);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	kfree(buf);
+
+	return ret;
+}
+
+#endif
+
+static const struct file_operations constraint_flags_fops = {
+#ifdef CONFIG_DEBUG_FS
+	.open = simple_open,
+	.read = constraint_flags_read_file,
+	.llseek = default_llseek,
+#endif
+};
+
 #define REG_STR_SIZE	64
 
 static struct regulator *create_regulator(struct regulator_dev *rdev,
@@ -1327,6 +1376,9 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 				   &regulator->min_uV);
 		debugfs_create_u32("max_uV", 0444, regulator->debugfs,
 				   &regulator->max_uV);
+		debugfs_create_file("constraint_flags", 0444,
+				    regulator->debugfs, regulator,
+				    &constraint_flags_fops);
 	}
 
 	/*
Signature · 1 line
2.8.0.rc3