Patch "spi: rockchip: modify DMA max burst to 1" has been added to the 4.4-stable tree
Subsystems (3)
This is a note to let you know that I've just added the patch titled
spi: rockchip: modify DMA max burst to 1
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
spi-rockchip-modify-dma-max-burst-to-1.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
80abf8880cc6e1594c11b7c417f22dde60e25312Mon Sep 17 00:00:00 2001
From: Addy Ke <[email protected]>
Date: Fri, 22 Jan 2016 19:06:52 +0800
Subject: spi: rockchip: modify DMA max burst to 1
From: Addy Ke <[email protected]>
commit 80abf8880cc6e1594c11b7c417f22dde60e25312 upstream.
Generic dma controller on Rockchips' platform cannot support DMAFLUSHP instruction which make dma to flush the req of non-aligned or non-multiple of what we need. That will cause an unrecoverable dma bus error. The saftest way is to set dma max burst to 1.
--- drivers/spi/spi-rockchip.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/spi/spi-rockchip.c +10 -2
@@ -199,6 +199,7 @@ struct rockchip_spi {struct sg_table rx_sg;struct rockchip_spi_dma_data dma_rx;struct rockchip_spi_dma_data dma_tx; +struct dma_slave_caps dma_caps; };static inline void spi_enable_chip (struct rockchip_spi *rs,int enable)
@@ -454,7 +455,10 @@ static void rockchip_spi_prepare_dma(str rxconf.direction = rs->dma_rx.direction; rxconf.src_addr = rs->dma_rx.addr; rxconf.src_addr_width = rs->n_bytes; - rxconf.src_maxburst = rs->n_bytes; +if (rs->dma_caps.max_burst >4 ) + rxconf.src_maxburst =4 ; +else + rxconf.src_maxburst =1 ;dmaengine_slave_config (rs->dma_rx.ch, &rxconf); rxdesc = dmaengine_prep_slave_sg(
@@ -471,7 +475,10 @@ static void rockchip_spi_prepare_dma(str txconf.direction = rs->dma_tx.direction; txconf.dst_addr = rs->dma_tx.addr; txconf.dst_addr_width = rs->n_bytes; - txconf.dst_maxburst = rs->n_bytes; +if (rs->dma_caps.max_burst >4 ) + txconf.dst_maxburst =4 ; +else + txconf.dst_maxburst =1 ;dmaengine_slave_config (rs->dma_tx.ch, &txconf); txdesc = dmaengine_prep_slave_sg(
@@ -735,6 +742,7 @@ static int rockchip_spi_probe(struct pla }if (rs->dma_tx.ch && rs->dma_rx.ch) { +dma_get_slave_caps (rs->dma_rx.ch, &(rs->dma_caps)); rs->dma_tx.addr = (dma_addr_t)(mem->start +ROCKCHIP_SPI_TXDR ); rs->dma_rx.addr = (dma_addr_t)(mem->start +ROCKCHIP_SPI_RXDR ); rs->dma_tx.direction =DMA_MEM_TO_DEV ;
Patches currently in stable-queue which might be from [email protected] are
queue-4.4/spi-rockchip-modify-dma-max-burst-to-1.patch