Skip to contentSkip to conversation

Tests: Replace prove by autotools tap runner

PATCH Jérémie Galarneau 1 participant 1 message May 14, 2016 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Merged in stable-2.8 and master. However, I have not removed the fast_regression since it is being used directly by the CI.
I'll remove it once the jobs have been adjusted to invoke 'make check' directly.

Also, were you planning on converting the other test suites to check-* targets?

Thanks,
Jérémie

Quoted 939 lines · Michael Jeanson

This patch removes the dependency on the prove perl script to run the TAP test suite. It replaces it with the autotools shell TAP driver that only requires a shell and awk.

Custom arguments can be passed to the test runner with env variables as follow:

  env LOG_DRIVER_FLAGS='--comments --ignore-exit' \
      TESTS='foo.test baz.test' make -e check

This tap driver also creates a log file for each test that can then be used by another system to build a test report.

---
 .gitignore                            |   3 +
 config/tap-driver.sh                  | 651 ++++++++++++++++++++++++++++++++++
 configure.ac                          |   2 +
 tests/Makefile.am                     |  19 +-
 tests/fast_regression                 |  31 --
 tests/regression/Makefile.am          |  58 ++-
 tests/regression/ust/test_event_basic |   3 +-
 tests/unit/Makefile.am                |  11 +
 tests/unit_tests                      |   7 -
 tests/utils/Makefile.am               |   4 +-
 10 files changed, 721 insertions(+), 68 deletions(-)
 create mode 100755 config/tap-driver.sh
 delete mode 100644 tests/fast_regression
 delete mode 100644 tests/unit_tests
.gitignore +3 -0
index 44c3ee7..445e769 100644
@@ -16,6 +16,8 @@ Makefile.in
 *.bz2
 *.tar
 *.class
+*.trs
+*.log
 .dirstamp
 configure
 aclocal.m4
@@ -97,6 +99,7 @@ tests/regression/ust/python-logging/test_python_logging
 /tests/regression/ust/baddr-statedump/prog
 /tests/regression/ust/baddr-statedump/prog.debug
 /tests/regression/ust/baddr-statedump/prog.strip
+/tests/regression/ust/type-declarations/type-declarations
 /tests/regression/ust/ust-dl/prog
 /tests/regression/ust/ust-dl/libfoo.so.debug
 /tests/utils/testapp/gen-ust-nevents/gen-ust-nevents
config/tap-driver.sh new file +651 -0
new file mode 100755
index 0000000..ee61fc1
@@ -0,0 +1,651 @@
+#! /bin/sh
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <[email protected]> or send patches to
+# <[email protected]>.
+
+scriptversion=2013-12-23.17; # UTC
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+me=tap-driver.sh
+
+fatal ()
+{
+  echo "$me: fatal: $*" >&2
+  exit 1
+}
+
+usage_error ()
+{
+  echo "$me: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  tap-driver.sh --test-name=NAME --log-file=PATH --trs-file=PATH
+                [--expect-failure={yes|no}] [--color-tests={yes|no}]
+                [--enable-hard-errors={yes|no}] [--ignore-exit]
+                [--diagnostic-string=STRING] [--merge|--no-merge]
+                [--comments|--no-comments] [--] TEST-COMMAND
+The '--test-name', '-log-file' and '--trs-file' options are mandatory.
+END
+}
+
+# TODO: better error handling in option parsing (in particular, ensure
+# TODO: $log_file, $trs_file and $test_name are defined).
+test_name= # Used for reporting.
+log_file=  # Where to save the result and output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=0
+color_tests=0
+merge=0
+ignore_exit=0
+comments=0
+diag_string='#'
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "$me $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) shift;; # No-op.
+  --merge) merge=1;;
+  --no-merge) merge=0;;
+  --ignore-exit) ignore_exit=1;;
+  --comments) comments=1;;
+  --no-comments) comments=0;;
+  --diagnostic-string) diag_string=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+  esac
+  shift
+done
+
+test $# -gt 0 || usage_error "missing test command"
+
+case $expect_failure in
+  yes) expect_failure=1;;
+    *) expect_failure=0;;
+esac
+
+if test $color_tests = yes; then
+  init_colors='
+    color_map["red"]=" [0;31m" # Red.
+    color_map["grn"]=" [0;32m" # Green.
+    color_map["lgn"]=" [1;32m" # Light green.
+    color_map["blu"]=" [1;34m" # Blue.
+    color_map["mgn"]=" [0;35m" # Magenta.
+    color_map["std"]=" [m"     # No color.
+    color_for_result["ERROR"] = "mgn"
+    color_for_result["PASS"]  = "grn"
+    color_for_result["XPASS"] = "red"
+    color_for_result["FAIL"]  = "red"
+    color_for_result["XFAIL"] = "lgn"
+    color_for_result["SKIP"]  = "blu"'
+else
+  init_colors=''
+fi
+
+# :; is there to work around a bug in bash 3.2 (and earlier) which
+# does not always set '$?' properly on redirection failure.
+# See the Autoconf manual for more details.
+:;{
+  (
+    # Ignore common signals (in this subshell only!), to avoid potential
+    # problems with Korn shells.  Some Korn shells are known to propagate
+    # to themselves signals that have killed a child process they were
+    # waiting for; this is done at least for SIGINT (and usually only for
+    # it, in truth).  Without the `trap' below, such a behaviour could
+    # cause a premature exit in the current subshell, e.g., in case the
+    # test command it runs gets terminated by a SIGINT.  Thus, the awk
+    # script we are piping into would never seen the exit status it
+    # expects on its last input line (which is displayed below by the
+    # last `echo $?' statement), and would thus die reporting an internal
+    # error.
+    # For more information, see the Autoconf manual and the threads:
+    # <http://lists.gnu.org/archive/html/bug-autoconf/2011-09/msg00004.html>
+    # <http://mail.opensolaris.org/pipermail/ksh93-integration-discuss/2009-February/004121.html>
+    trap : 1 3 2 13 15
+    if test $merge -gt 0; then
+      exec 2>&1
+    else
+      exec 2>&3
+    fi
+    "$@"
+    echo $?
+  ) | LC_ALL=C ${AM_TAP_AWK-awk} \
+        -v me="$me" \
+        -v test_script_name="$test_name" \
+        -v log_file="$log_file" \
+        -v trs_file="$trs_file" \
+        -v expect_failure="$expect_failure" \
+        -v merge="$merge" \
+        -v ignore_exit="$ignore_exit" \
+        -v comments="$comments" \
+        -v diag_string="$diag_string" \
+'
+# TODO: the usages of "cat >&3" below could be optimized when using
+#       GNU awk, and/on on systems that supports /dev/fd/.
+
+# Implementation note: in what follows, `result_obj` will be an
+# associative array that (partly) simulates a TAP result object
+# from the `TAP::Parser` perl module.
+
+## ----------- ##
+##  FUNCTIONS  ##
+## ----------- ##
+
+function fatal(msg)
+{
+  print me ": " msg | "cat >&2"
+  exit 1
+}
+
+function abort(where)
+{
+  fatal("internal error " where)
+}
+
+# Convert a boolean to a "yes"/"no" string.
+function yn(bool)
+{
+  return bool ? "yes" : "no";
+}
+
+function add_test_result(result)
+{
+  if (!test_results_index)
+    test_results_index = 0
+  test_results_list[test_results_index] = result
+  test_results_index += 1
+  test_results_seen[result] = 1;
+}
+
+# Whether the test script should be re-run by "make recheck".
+function must_recheck()
+{
+  for (k in test_results_seen)
+    if (k != "XFAIL" && k != "PASS" && k != "SKIP")
+      return 1
+  return 0
+}
+
+# Whether the content of the log file associated to this test should
+# be copied into the "global" test-suite.log.
+function copy_in_global_log()
+{
+  for (k in test_results_seen)
+    if (k != "PASS")
+      return 1
+  return 0
+}
+
+function get_global_test_result()
+{
+    if ("ERROR" in test_results_seen)
+      return "ERROR"
+    if ("FAIL" in test_results_seen || "XPASS" in test_results_seen)
+      return "FAIL"
+    all_skipped = 1
+    for (k in test_results_seen)
+      if (k != "SKIP")
+        all_skipped = 0
+    if (all_skipped)
+      return "SKIP"
+    return "PASS";
+}
+
+function stringify_result_obj(result_obj)
+{
+  if (result_obj["is_unplanned"] || result_obj["number"] != testno)
+    return "ERROR"
+
+  if (plan_seen == LATE_PLAN)
+    return "ERROR"
+
+  if (result_obj["directive"] == "TODO")
+    return result_obj["is_ok"] ? "XPASS" : "XFAIL"
+
+  if (result_obj["directive"] == "SKIP")
+    return result_obj["is_ok"] ? "SKIP" : COOKED_FAIL;
+
+  if (length(result_obj["directive"]))
+      abort("in function stringify_result_obj()")
+
+  return result_obj["is_ok"] ? COOKED_PASS : COOKED_FAIL
+}
+
+function decorate_result(result)
+{
+  color_name = color_for_result[result]
+  if (color_name)
+    return color_map[color_name] "" result "" color_map["std"]
+  # If we are not using colorized output, or if we do not know how
+  # to colorize the given result, we should return it unchanged.
+  return result
+}
+
+function report(result, details)
+{
+  if (result ~ /^(X?(PASS|FAIL)|SKIP|ERROR)/)
+    {
+      msg = ": " test_script_name
+      add_test_result(result)
+    }
+  else if (result == "#")
+    {
+      msg = " " test_script_name ":"
+    }
+  else
+    {
+      abort("in function report()")
+    }
+  if (length(details))
+    msg = msg " " details
+  # Output on console might be colorized.
+  print decorate_result(result) msg
+  # Log the result in the log file too, to help debugging (this is
+  # especially true when said result is a TAP error or "Bail out!").
+  print result msg | "cat >&3";
+}
+
+function testsuite_error(error_message)
+{
+  report("ERROR", "- " error_message)
+}
+
+function handle_tap_result()
+{
+  details = result_obj["number"];
+  if (length(result_obj["description"]))
+    details = details " " result_obj["description"]
+
+  if (plan_seen == LATE_PLAN)
+    {
+      details = details " # AFTER LATE PLAN";
+    }
+  else if (result_obj["is_unplanned"])
+    {
+       details = details " # UNPLANNED";
+    }
+  else if (result_obj["number"] != testno)
+    {
+       details = sprintf("%s # OUT-OF-ORDER (expecting %d)",
+                         details, testno);
+    }
+  else if (result_obj["directive"])
+    {
+      details = details " # " result_obj["directive"];
+      if (length(result_obj["explanation"]))
+        details = details " " result_obj["explanation"]
+    }
+
+  report(stringify_result_obj(result_obj), details)
+}
+
+# `skip_reason` should be empty whenever planned > 0.
+function handle_tap_plan(planned, skip_reason)
+{
+  planned += 0 # Avoid getting confused if, say, `planned` is "00"
+  if (length(skip_reason) && planned > 0)
+    abort("in function handle_tap_plan()")
+  if (plan_seen)
+    {
+      # Error, only one plan per stream is acceptable.
+      testsuite_error("multiple test plans")
+      return;
+    }
+  planned_tests = planned
+  # The TAP plan can come before or after *all* the TAP results; we speak
+  # respectively of an "early" or a "late" plan.  If we see the plan line
+  # after at least one TAP result has been seen, assume we have a late
+  # plan; in this case, any further test result seen after the plan will
+  # be flagged as an error.
+  plan_seen = (testno >= 1 ? LATE_PLAN : EARLY_PLAN)
+  # If testno > 0, we have an error ("too many tests run") that will be
+  # automatically dealt with later, so do not worry about it here.  If
+  # $plan_seen is true, we have an error due to a repeated plan, and that
+  # has already been dealt with above.  Otherwise, we have a valid "plan
+  # with SKIP" specification, and should report it as a particular kind
+  # of SKIP result.
+  if (planned == 0 && testno == 0)
+    {
+      if (length(skip_reason))
+        skip_reason = "- "  skip_reason;
+      report("SKIP", skip_reason);
+    }
+}
+
+function extract_tap_comment(line)
+{
+  if (index(line, diag_string) == 1)
+    {
+      # Strip leading `diag_string` from `line`.
+      line = substr(line, length(diag_string) + 1)
+      # And strip any leading and trailing whitespace left.
+      sub("^[ \t]*", "", line)
+      sub("[ \t]*$", "", line)
+      # Return what is left (if any).
+      return line;
+    }
+  return "";
+}
+
+# When this function is called, we know that line is a TAP result line,
+# so that it matches the (perl) RE "^(not )?ok\b".
+function setup_result_obj(line)
+{
+  # Get the result, and remove it from the line.
+  result_obj["is_ok"] = (substr(line, 1, 2) == "ok" ? 1 : 0)
+  sub("^(not )?ok[ \t]*", "", line)
+
+  # If the result has an explicit number, get it and strip it; otherwise,
+  # automatically assing the next progresive number to it.
+  if (line ~ /^[0-9]+$/ || line ~ /^[0-9]+[^a-zA-Z0-9_]/)
+    {
+      match(line, "^[0-9]+")
+      # The final `+ 0` is to normalize numbers with leading zeros.
+      result_obj["number"] = substr(line, 1, RLENGTH) + 0
+      line = substr(line, RLENGTH + 1)
+    }
+  else
+    {
+      result_obj["number"] = testno
+    }
+
+  if (plan_seen == LATE_PLAN)
+    # No further test results are acceptable after a "late" TAP plan
+    # has been seen.
+    result_obj["is_unplanned"] = 1
+  else if (plan_seen && testno > planned_tests)
+    result_obj["is_unplanned"] = 1
+  else
+    result_obj["is_unplanned"] = 0
+
+  # Strip trailing and leading whitespace.
+  sub("^[ \t]*", "", line)
+  sub("[ \t]*$", "", line)
+
+  # This will have to be corrected if we have a "TODO"/"SKIP" directive.
+  result_obj["description"] = line
+  result_obj["directive"] = ""
+  result_obj["explanation"] = ""
+
+  if (index(line, "#") == 0)
+    return # No possible directive, nothing more to do.
+
+  # Directives are case-insensitive.
+  rx = "[ \t]*#[ \t]*([tT][oO][dD][oO]|[sS][kK][iI][pP])[ \t]*"
+
+  # See whether we have the directive, and if yes, where.
+  pos = match(line, rx "$")
+  if (!pos)
+    pos = match(line, rx "[^a-zA-Z0-9_]")
+
+  # If there was no TAP directive, we have nothing more to do.
+  if (!pos)
+    return
+
+  # Let`s now see if the TAP directive has been escaped.  For example:
+  #  escaped:     ok \# SKIP
+  #  not escaped: ok \\# SKIP
+  #  escaped:     ok \\\\\# SKIP
+  #  not escaped: ok \ # SKIP
+  if (substr(line, pos, 1) == "#")
+    {
+      bslash_count = 0
+      for (i = pos; i > 1 && substr(line, i - 1, 1) == "\\"; i--)
+        bslash_count += 1
+      if (bslash_count % 2)
+        return # Directive was escaped.
+    }
+
+  # Strip the directive and its explanation (if any) from the test
+  # description.
+  result_obj["description"] = substr(line, 1, pos - 1)
+  # Now remove the test description from the line, that has been dealt
+  # with already.
+  line = substr(line, pos)
+  # Strip the directive, and save its value (normalized to upper case).
+  sub("^[ \t]*#[ \t]*", "", line)
+  result_obj["directive"] = toupper(substr(line, 1, 4))
+  line = substr(line, 5)
+  # Now get the explanation for the directive (if any), with leading
+  # and trailing whitespace removed.
+  sub("^[ \t]*", "", line)
+  sub("[ \t]*$", "", line)
+  result_obj["explanation"] = line
+}
+
+function get_test_exit_message(status)
+{
+  if (status == 0)
+    return ""
+  if (status !~ /^[1-9][0-9]*$/)
+    abort("getting exit status")
+  if (status < 127)
+    exit_details = ""
+  else if (status == 127)
+    exit_details = " (command not found?)"
+  else if (status >= 128 && status <= 255)
+    exit_details = sprintf(" (terminated by signal %d?)", status - 128)
+  else if (status > 256 && status <= 384)
+    # We used to report an "abnormal termination" here, but some Korn
+    # shells, when a child process die due to signal number n, can leave
+    # in $? an exit status of 256+n instead of the more standard 128+n.
+    # Apparently, both behaviours are allowed by POSIX (2008), so be
+    # prepared to handle them both.  See also Austing Group report ID
+    # 0000051 <http://www.austingroupbugs.net/view.php?id=51>
+    exit_details = sprintf(" (terminated by signal %d?)", status - 256)
+  else
+    # Never seen in practice.
+    exit_details = " (abnormal termination)"
+  return sprintf("exited with status %d%s", status, exit_details)
+}
+
+function write_test_results()
+{
+  print ":global-test-result: " get_global_test_result() > trs_file
+  print ":recheck: "  yn(must_recheck()) > trs_file
+  print ":copy-in-global-log: " yn(copy_in_global_log()) > trs_file
+  for (i = 0; i < test_results_index; i += 1)
+    print ":test-result: " test_results_list[i] > trs_file
+  close(trs_file);
+}
+
+BEGIN {
+
+## ------- ##
+##  SETUP  ##
+## ------- ##
+
+'"$init_colors"'
+
+# Properly initialized once the TAP plan is seen.
+planned_tests = 0
+
+COOKED_PASS = expect_failure ? "XPASS": "PASS";
+COOKED_FAIL = expect_failure ? "XFAIL": "FAIL";
+
+# Enumeration-like constants to remember which kind of plan (if any)
+# has been seen.  It is important that NO_PLAN evaluates "false" as
+# a boolean.
+NO_PLAN = 0
+EARLY_PLAN = 1
+LATE_PLAN = 2
+
+testno = 0     # Number of test results seen so far.
+bailed_out = 0 # Whether a "Bail out!" directive has been seen.
+
+# Whether the TAP plan has been seen or not, and if yes, which kind
+# it is ("early" is seen before any test result, "late" otherwise).
+plan_seen = NO_PLAN
+
+## --------- ##
+##  PARSING  ##
+## --------- ##
+
+is_first_read = 1
+
+while (1)
+  {
+    # Involutions required so that we are able to read the exit status
+    # from the last input line.
+    st = getline
+    if (st < 0) # I/O error.
+      fatal("I/O error while reading from input stream")
+    else if (st == 0) # End-of-input
+      {
+        if (is_first_read)
+          abort("in input loop: only one input line")
+        break
+      }
+    if (is_first_read)
+      {
+        is_first_read = 0
+        nextline = $0
+        continue
+      }
+    else
+      {
+        curline = nextline
+        nextline = $0
+        $0 = curline
+      }
+    # Copy any input line verbatim into the log file.
+    print | "cat >&3"
+    # Parsing of TAP input should stop after a "Bail out!" directive.
+    if (bailed_out)
+      continue
+
+    # TAP test result.
+    if ($0 ~ /^(not )?ok$/ || $0 ~ /^(not )?ok[^a-zA-Z0-9_]/)
+      {
+        testno += 1
+        setup_result_obj($0)
+        handle_tap_result()
+      }
+    # TAP plan (normal or "SKIP" without explanation).
+    else if ($0 ~ /^1\.\.[0-9]+[ \t]*$/)
+      {
+        # The next two lines will put the number of planned tests in $0.
+        sub("^1\\.\\.", "")
+        sub("[^0-9]*$", "")
+        handle_tap_plan($0, "")
+        continue
+      }
+    # TAP "SKIP" plan, with an explanation.
+    else if ($0 ~ /^1\.\.0+[ \t]*#/)
+      {
+        # The next lines will put the skip explanation in $0, stripping
+        # any leading and trailing whitespace.  This is a little more
+        # tricky in truth, since we want to also strip a potential leading
+        # "SKIP" string from the message.
+        sub("^[^#]*#[ \t]*(SKIP[: \t][ \t]*)?", "")
+        sub("[ \t]*$", "");
+        handle_tap_plan(0, $0)
+      }
+    # "Bail out!" magic.
+    # Older versions of prove and TAP::Harness (e.g., 3.17) did not
+    # recognize a "Bail out!" directive when preceded by leading
+    # whitespace, but more modern versions (e.g., 3.23) do.  So we
+    # emulate the latter, "more modern" behaviour.
+    else if ($0 ~ /^[ \t]*Bail out!/)
+      {
+        bailed_out = 1
+        # Get the bailout message (if any), with leading and trailing
+        # whitespace stripped.  The message remains stored in `$0`.
+        sub("^[ \t]*Bail out![ \t]*", "");
+        sub("[ \t]*$", "");
+        # Format the error message for the
+        bailout_message = "Bail out!"
+        if (length($0))
+          bailout_message = bailout_message " " $0
+        testsuite_error(bailout_message)
+      }
+    # Maybe we have too look for dianogtic comments too.
+    else if (comments != 0)
+      {
+        comment = extract_tap_comment($0);
+        if (length(comment))
+          report("#", comment);
+      }
+  }
+
+## -------- ##
+##  FINISH  ##
+## -------- ##
+
+# A "Bail out!" directive should cause us to ignore any following TAP
+# error, as well as a non-zero exit status from the TAP producer.
+if (!bailed_out)
+  {
+    if (!plan_seen)
+      {
+        testsuite_error("missing test plan")
+      }
+    else if (planned_tests != testno)
+      {
+        bad_amount = testno > planned_tests ? "many" : "few"
+        testsuite_error(sprintf("too %s tests run (expected %d, got %d)",
+                                bad_amount, planned_tests, testno))
+      }
+    if (!ignore_exit)
+      {
+        # Fetch exit status from the last line.
+        exit_message = get_test_exit_message(nextline)
+        if (exit_message)
+          testsuite_error(exit_message)
+      }
+  }
+
+write_test_results()
+
+exit 0
+
+} # End of "BEGIN" block.
+'
+
+# TODO: document that we consume the file descriptor 3 :-(
+} 3>"$log_file"
+
+test $? -eq 0 || fatal "I/O or internal error"
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
configure.ac +2 -0
index 5f5f9e5..5721c55 100644
@@ -14,6 +14,8 @@ AM_MAINTAINER_MODE([enable])
 # Enable silent rules if available (Introduced in AM 1.11)
 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
 
+AC_REQUIRE_AUX_FILE([tap-driver.sh])
+
 # Checks for C compiler
 AC_USE_SYSTEM_EXTENSIONS
 AC_SYS_LARGEFILE
tests/Makefile.am +6 -13
index c7d4cd0..1e76e8a 100644
@@ -2,18 +2,10 @@ SUBDIRS =
 DIST_SUBDIRS = utils regression unit stress destructive
 
 if BUILD_TESTS
-SUBDIRS += utils regression unit stress destructive
-endif
-
-check-am:
-if BUILD_TESTS
+SUBDIRS += . utils regression unit stress destructive
 if HAS_PGREP
-       ./utils/warn_lttng_processes.sh $(PGREP)
-endif
-       ./run.sh unit_tests
-       ./run.sh fast_regression
-if PYTHON_BINDING
-       ./run.sh with_bindings_regression
+check-am:
+       $(top_srcdir)/tests/utils/warn_lttng_processes.sh $(PGREP)
 endif
 else
        @echo "========================================="
@@ -21,8 +13,9 @@ else
        @echo "========================================="
 endif
 
-dist_noinst_SCRIPTS = run.sh unit_tests fast_regression long_regression root_regression with_bindings_regression root_destructive_tests
-EXTRA_DIST = run.sh unit_tests fast_regression long_regression root_regression with_bindings_regression README root_destructive_tests
+
+dist_noinst_SCRIPTS = run.sh long_regression root_regression root_destructive_tests
+EXTRA_DIST = run.sh long_regression root_regression README root_destructive_tests
 
 all-local:
        @if [ x"$(srcdir)" != x"$(builddir)" ]; then \
tests/fast_regression deleted +0 -31
deleted file mode 100644
index aa0c043..0000000
@@ -1,31 +0,0 @@
-regression/tools/filtering/test_invalid_filter
-regression/tools/filtering/test_unsupported_op
-regression/tools/filtering/test_valid_filter
-regression/tools/streaming/test_ust
-regression/tools/health/test_thread_ok
-regression/tools/live/test_ust
-regression/tools/live/test_ust_tracefile_count
-regression/tools/live/test_lttng_ust
-regression/tools/tracefile-limits/test_tracefile_count
-regression/tools/tracefile-limits/test_tracefile_size
-regression/tools/exclusion/test_exclusion
-regression/tools/snapshots/test_ust_fast
-regression/tools/snapshots/test_ust_streaming
-regression/tools/save-load/test_save
-regression/tools/save-load/test_load
-regression/tools/mi/test_mi
-regression/tools/wildcard/test_event_wildcard
-regression/tools/crash/test_crash
-regression/tools/metadata-regen/test_ust
-regression/ust/before-after/test_before_after
-regression/ust/buffers-pid/test_buffers_pid
-regression/ust/multi-session/test_multi_session
-regression/ust/nprocesses/test_nprocesses
-regression/ust/overlap/test_overlap
-regression/ust/java-jul/test_java_jul
-regression/ust/java-log4j/test_java_log4j
-regression/ust/python-logging/test_python_logging
-regression/ust/getcpu-override/test_getcpu_override
-regression/ust/clock-override/test_clock_override
-regression/ust/test_event_basic
-regression/ust/test_event_tracef
tests/regression/Makefile.am +45 -13
index 17dd630..5f4a6e4 100644
@@ -1,19 +1,51 @@
 SUBDIRS = tools kernel ust
 
+LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
+       $(top_srcdir)/config/tap-driver.sh
+
+TESTS = tools/filtering/test_invalid_filter \
+       tools/filtering/test_unsupported_op \
+       tools/filtering/test_valid_filter \
+       tools/streaming/test_ust \
+       tools/health/test_thread_ok \
+       tools/live/test_ust \
+       tools/live/test_ust_tracefile_count \
+       tools/live/test_lttng_ust \
+       tools/tracefile-limits/test_tracefile_count \
+       tools/tracefile-limits/test_tracefile_size \
+       tools/exclusion/test_exclusion \
+       tools/snapshots/test_ust_fast \
+       tools/snapshots/test_ust_streaming \
+       tools/save-load/test_save \
+       tools/save-load/test_load \
+       tools/mi/test_mi \
+       tools/wildcard/test_event_wildcard \
+       tools/crash/test_crash \
+       tools/metadata-regen/test_ust
+
 if HAVE_LIBLTTNG_UST_CTL
 SUBDIRS += ust
+TESTS += ust/before-after/test_before_after \
+       ust/buffers-pid/test_buffers_pid \
+       ust/multi-session/test_multi_session \
+       ust/nprocesses/test_nprocesses \
+       ust/overlap/test_overlap \
+       ust/java-jul/test_java_jul \
+       ust/java-log4j/test_java_log4j \
+       ust/python-logging/test_python_logging \
+       ust/getcpu-override/test_getcpu_override \
+       ust/clock-override/test_clock_override \
+       ust/test_event_basic \
+       ust/test_event_tracef
 endif # HAVE_LIBLTTNG_UST_CTL
 
-all-local:
-       @if [ x"$(srcdir)" != x"$(builddir)" ]; then \
-               for script in $(EXTRA_DIST); do \
-                       cp -f $(srcdir)/$$script $(builddir); \
-               done; \
-       fi
-
-clean-local:
-       @if [ x"$(srcdir)" != x"$(builddir)" ]; then \
-               for script in $(EXTRA_DIST); do \
-                       rm -f $(builddir)/$$script; \
-               done; \
-       fi
+if PYTHON_BINDING
+TESTS += ust/linking/test_linking \
+       ust/daemon/test_daemon \
+       ust/exit-fast/test_exit-fast \
+       ust/fork/test_fork \
+       ust/libc-wrapper/test_libc-wrapper \
+       ust/baddr-statedump/test_baddr-statedump \
+       ust/ust-dl/test_ust-dl \
+       ust/type-declarations/test_type_declarations
+endif
tests/regression/ust/test_event_basic +1 -2
index acc79e5..072d74a 100755
@@ -68,9 +68,8 @@ function test_event_basic()
        start_lttng_tracing_ok
        stop_lttng_tracing_ok
 
-       TODO="Validate trace output is coherent"
+       # TODO: Validate trace output is coherent"
        ok 0 "Validate trace"
-       unset TODO
 
        destroy_lttng_session_ok $SESSION_NAME2
        destroy_lttng_session_ok $SESSION_NAME
tests/unit/Makefile.am +11 -0
index 7bfe65a..b7f318f 100644
@@ -3,6 +3,16 @@ SUBDIRS = ini_config
 AM_CFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/src -I$(top_srcdir)/tests/utils/ -I$(srcdir)
 AM_LDFLAGS =
 
+LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
+       $(top_srcdir)/config/tap-driver.sh
+
+TESTS = test_kernel_data \
+       test_session \
+       test_uri \
+       test_utils_parse_size_suffix \
+       test_utils_expand_path \
+       ini_config/test_ini_config
+
 if LTTNG_TOOLS_BUILD_WITH_LIBDL
 LIBS += -ldl
 endif
@@ -23,6 +33,7 @@ noinst_PROGRAMS += test_utils_parse_size_suffix test_utils_expand_path
 
 if HAVE_LIBLTTNG_UST_CTL
 noinst_PROGRAMS += test_ust_data
+TESTS += test_ust_data
 endif
 
 # URI unit tests
tests/unit_tests deleted +0 -7
deleted file mode 100644
index e577e0e..0000000
@@ -1,7 +0,0 @@
-unit/test_kernel_data
-unit/test_session
-unit/test_uri
-unit/test_ust_data
-unit/test_utils_parse_size_suffix
-unit/test_utils_expand_path
-unit/ini_config/test_ini_config
tests/utils/Makefile.am +2 -3
index eac5bdb..4208648 100644
@@ -1,7 +1,7 @@
 SUBDIRS = . tap testapp
 
-EXTRA_DIST = utils.sh test_utils.py babelstats.pl warn_lttng_processes.sh
-dist_noinst_SCRIPTS = utils.sh test_utils.py babelstats.pl warn_lttng_processes.sh
+EXTRA_DIST = utils.sh test_utils.py babelstats.pl
+dist_noinst_SCRIPTS = utils.sh test_utils.py babelstats.pl
 noinst_LTLIBRARIES = libtestutils.la
 
 libtestutils_la_SOURCES = utils.c utils.h
--

1.9.1

Signature · 7 lines
Jérémie Galarneau
EfficiOS Inc.
http://www.efficios.com
_______________________________________________
lttng-dev mailing list
[email protected]
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev