iommu/vt-d: Don't reject NTB devices due to scope mismatch

From: Roland Dreier <[email protected]>

On a system with an Intel PCIe port configured as an NTB device, iommu initialization fails with

DMAR: Device scope type does not match for 0000:80:03.0

This is because the DMAR table reports this device as having scope 2 (ACPI_DMAR_SCOPE_TYPE_BRIDGE):

    [0A0h 0160   1]      Device Scope Entry Type : 02
    [0A1h 0161   1]                 Entry Length : 08
    [0A2h 0162   2]                     Reserved : 0000
    [0A4h 0164   1]               Enumeration ID : 00
    [0A5h 0165   1]               PCI Bus Number : 80

    [0A6h 0166   2]                     PCI Path : 03,00

but the device has a type 0 PCI header:

    80:03.0 Bridge [0680]: Intel Corporation Device [8086:2f0d] (rev 02)
    00: 86 80 0d 2f 00 00 10 00 02 00 80 06 10 00 80 00
    10: 0c 00 c0 00 c0 38 00 00 0c 00 00 00 80 38 00 00
    20: 00 00 00 c8 00 00 10 c8 00 00 00 00 86 80 00 00
    30: 00 00 00 00 60 00 00 00 00 00 00 00 ff 01 00 00

VT-d works perfectly on this system, so there's no reason to bail out on initialization due to this apparent scope mismatch. Use the class 0x0680 ("Other bridge device") as a heuristic for allowing DMAR initialization for non-bridge PCI devices listed with scope bridge.

---
 drivers/iommu/dmar.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

index 6a86b5d1defa..2eff7b6c6c98 100644
@@ -241,8 +241,20 @@ int dmar_insert_dev_scope(struct dmar_pci_notify_info *info,
 		if (!dmar_match_pci_path(info, scope->bus, path, level))
 			continue;
 
-		if ((scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT) ^
-		    (info->dev->hdr_type == PCI_HEADER_TYPE_NORMAL)) {
+		/*
+		 * We expect devices with endpoint scope to have normal PCI
+		 * headers, and devices with bridge scope to have bridge PCI
+		 * headers.  However PCI NTB devices may be listed in the
+		 * DMAR table with bridge scope, even though they have a
+		 * normal PCI header.  NTB devices are identified by class
+		 * "BRIDGE_OTHER" (0680h) - we don't declare a socpe mismatch
+		 * for this special case.
+		 */
+		if ((scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT &&
+		     info->dev->hdr_type != PCI_HEADER_TYPE_NORMAL) ||
+		    (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE &&
+		     (info->dev->hdr_type == PCI_HEADER_TYPE_NORMAL &&
+		      info->dev->class >> 8 != PCI_CLASS_BRIDGE_OTHER))) {
 			pr_warn("Device scope type does not match for %s\n",
 				pci_name(info->dev));
 			return -EINVAL;

2.7.4

Applied, thanks.