Skip to contentSkip to conversation

iommu/vt-d: Avoid write-tearing on PTE clear

PATCH Superseded Nadav Amit 1 participant 1 message Jun 10, 2016 IOMMU

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Nadav Amit

author
#0 lore raw

PATCH v2 1/1 iommu/vt-d: Avoid write-tearing on PTE clear

When a PTE is cleared, the write may be teared or perform by multiple writes. In addition, in 32-bit kernel, writes are currently performed using a single 64-bit write, which does not guarantee order.

The byte-code right now does not seem to cause a problem, but it may still occur in theory.

Avoid this scenario by using WRITE_ONCE, and order the writes on 32-bit kernels.

---

V2: Use two WRITE_ONCE on 32-bit to avoid reordering

---
 drivers/iommu/intel-iommu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +18 -1
index e1852e8..6ffd3d3 100644
@@ -326,9 +326,26 @@ struct dma_pte {
 	u64 val;
 };
 
+#ifndef CONFIG_64BIT
+union split_dma_pte {
+	struct {
+		u32 val_low;
+		u32 val_high;
+	};
+	u64 val;
+};
+#endif
+
 static inline void dma_clear_pte(struct dma_pte *pte)
 {
-	pte->val = 0;
+#ifdef CONFIG_64BIT
+	WRITE_ONCE(pte->val, 0);
+#else
+	union split_dma_pte *sdma_pte = (union split_dma_pte *)pte;
+
+	WRITE_ONCE(sdma_pte->val_low, 0);
+	WRITE_ONCE(sdma_pte->val_high, 0);
+#endif
 }
 
 static inline u64 dma_pte_addr(struct dma_pte *pte)
Signature · 1 line
2.7.4