Skip to contentSkip to conversation

drm/i915: Fix log type for RC6 debug messages

PATCH In review Imre Deak 3 participants 8 messages Jun 29, 2016 – Jul 1, 2016

Subsystems (2)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

PATCH 1/2 drm/i915: Fix log type for RC6 debug messages

RC6 isn't really a KMS feature, so use the more proper DRIVER log type for RC6 related debug messages.

CC Sagar Arun Kamble <[email protected]>
---
 drivers/gpu/drm/i915/intel_pm.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +14 -12
index d7f8ba8..5dce264 100644
@@ -4973,14 +4973,15 @@ static void intel_print_rc6_info(struct drm_i915_private *dev_priv, u32 mode)
 			mode = 0;
 	}
 	if (HAS_RC6p(dev_priv))
-		DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s RC6p %s RC6pp %s\n",
-			      onoff(mode & GEN6_RC_CTL_RC6_ENABLE),
-			      onoff(mode & GEN6_RC_CTL_RC6p_ENABLE),
-			      onoff(mode & GEN6_RC_CTL_RC6pp_ENABLE));
+		DRM_DEBUG_DRIVER("Enabling RC6 states: "
+				 "RC6 %s RC6p %s RC6pp %s\n",
+				 onoff(mode & GEN6_RC_CTL_RC6_ENABLE),
+				 onoff(mode & GEN6_RC_CTL_RC6p_ENABLE),
+				 onoff(mode & GEN6_RC_CTL_RC6pp_ENABLE));
 
 	else
-		DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s\n",
-			      onoff(mode & GEN6_RC_CTL_RC6_ENABLE));
+		DRM_DEBUG_DRIVER("Enabling RC6 states: RC6 %s\n",
+				 onoff(mode & GEN6_RC_CTL_RC6_ENABLE));
 }
 
 static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
@@ -4990,7 +4991,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
 	unsigned long rc6_ctx_base;
 
 	if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
-		DRM_DEBUG_KMS("RC6 Base location not set properly.\n");
+		DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n");
 		enable_rc6 = false;
 	}
 
@@ -5002,7 +5003,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
 	if (!((rc6_ctx_base >= ggtt->stolen_reserved_base) &&
 	      (rc6_ctx_base + PAGE_SIZE <= ggtt->stolen_reserved_base +
 					ggtt->stolen_reserved_size))) {
-		DRM_DEBUG_KMS("RC6 Base address not as expected.\n");
+		DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n");
 		enable_rc6 = false;
 	}
 
@@ -5010,7 +5011,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
 	      ((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) &&
 	      ((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) &&
 	      ((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) {
-		DRM_DEBUG_KMS("Engine Idle wait time not set properly.\n");
+		DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n");
 		enable_rc6 = false;
 	}
 
@@ -5018,7 +5019,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
 					    GEN6_RC_CTL_HW_ENABLE)) &&
 	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) ||
 	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_KMS("HW/SW RC6 is not enabled by BIOS.\n");
+		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by BIOS.\n");
 		enable_rc6 = false;
 	}
 
@@ -5050,8 +5051,9 @@ int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6)
 			mask = INTEL_RC6_ENABLE;
 
 		if ((enable_rc6 & mask) != enable_rc6)
-			DRM_DEBUG_KMS("Adjusting RC6 mask to %d (requested %d, valid %d)\n",
-				      enable_rc6 & mask, enable_rc6, mask);
+			DRM_DEBUG_DRIVER("Adjusting RC6 mask to %d "
+					 "(requested %d, valid %d)\n",
+					 enable_rc6 & mask, enable_rc6, mask);
 
 		return enable_rc6 & mask;
 	}
Signature · 6 lines
2.5.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 2/2 drm/i915/bxt: Fix sanity check for BIOS RC6 setup

BXT BIOS has two options related to GPU power management: "RC6(Render Standby)" and "GT PM Support". The assumption so far was that disabling either of these options would leave RC6 uninitialized. According to my tests this isn't so: for a proper RC6 setup we only need the "GT PM Support" option to be enabled while the "RC6" option only controls whether RC6 is left enabled or not by BIOS. OTOH we were missing a few checks to ensure a proper RC6 setup. Add these now and don't fail the sanity check if RC6 is disabled. This fixes a problem where RC6 remains disabled after reloading the driver, since we explicitly disable RC6 during unloading.

CC Sagar Arun Kamble <[email protected]>
---
 drivers/gpu/drm/i915/i915_reg.h |  5 +++++
 drivers/gpu/drm/i915/intel_pm.c | 19 ++++++++++++++-----
 2 files changed, 19 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +5 -0
index c6bfbf8..92b4046 100644
@@ -7085,12 +7085,17 @@ enum {
 #define GEN6_RC6pp_THRESHOLD			_MMIO(0xA0C0)
 #define GEN6_PMINTRMSK				_MMIO(0xA168)
 #define   GEN8_PMINTR_REDIRECT_TO_NON_DISP	(1<<31)
+#define GEN8_MISC_CTRL0				_MMIO(0xA180)
 #define VLV_PWRDWNUPCTL				_MMIO(0xA294)
 #define GEN9_MEDIA_PG_IDLE_HYSTERESIS		_MMIO(0xA0C4)
 #define GEN9_RENDER_PG_IDLE_HYSTERESIS		_MMIO(0xA0C8)
 #define GEN9_PG_ENABLE				_MMIO(0xA210)
 #define GEN9_RENDER_PG_ENABLE			(1<<0)
 #define GEN9_MEDIA_PG_ENABLE			(1<<1)
+#define GEN8_PUSHBUS_CONTROL			_MMIO(0xA248)
+#define GEN8_PUSHBUS_ENABLE			_MMIO(0xA250)
+#define GEN8_PUSHBUS_SHIFT			_MMIO(0xA25C)
+
 
 #define VLV_CHICKEN_3				_MMIO(VLV_DISPLAY_BASE + 0x7040C)
 #define  PIXEL_OVERLAP_CNT_MASK			(3 << 30)
drivers/gpu/drm/i915/intel_pm.c +14 -5
index 5dce264..fe76991 100644
@@ -5015,11 +5015,20 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
 		enable_rc6 = false;
 	}
 
-	if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE |
-					    GEN6_RC_CTL_HW_ENABLE)) &&
-	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) ||
-	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by BIOS.\n");
+	if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
+	    !I915_READ(GEN8_PUSHBUS_ENABLE) ||
+	    !I915_READ(GEN8_PUSHBUS_SHIFT)) {
+		DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
+		enable_rc6 = false;
+	}
+
+	if (!I915_READ(GEN6_GFXPAUSE)) {
+		DRM_DEBUG_DRIVER("GFX pause not setup properly.\n");
+		enable_rc6 = false;
+	}
+
+	if (!I915_READ(GEN8_MISC_CTRL0)) {
+		DRM_DEBUG_DRIVER("GPM control not setup properly.\n");
 		enable_rc6 = false;
 	}
 
Signature · 6 lines
2.5.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH 2/2] drm/i915/bxt: Fix sanity check for BIOS RC6 setup

Have seen BIOS having option "RC6" disabled and "GTPM" enabled for cases where there are RC6 specific issues. GTPM option entails setup for other features as well I guess.
In such cases - Can we output some DRM_INFO log saying BIOS has disabled RC6 although setup is available.

Do we need to also check for other unit level clock gating register setup done by BIOS like: GEN7_MISCCPCTL, GEN6_UCGCTL1 to GEN6_UCGCTL4, GEN8_UCGCTL6 etc.

Thanks
Sagar

Quoted 60 lines · Imre Deak

BXT BIOS has two options related to GPU power management: "RC6(Render Standby)" and "GT PM Support". The assumption so far was that disabling either of these options would leave RC6 uninitialized. According to my tests this isn't so: for a proper RC6 setup we only need the "GT PM Support" option to be enabled while the "RC6" option only controls whether RC6 is left enabled or not by BIOS. OTOH we were missing a few checks to ensure a proper RC6 setup. Add these now and don't fail the sanity check if RC6 is disabled. This fixes a problem where RC6 remains disabled after reloading the driver, since we explicitly disable RC6 during unloading.

CC Sagar Arun Kamble <[email protected]>
---
  drivers/gpu/drm/i915/i915_reg.h |  5 +++++
  drivers/gpu/drm/i915/intel_pm.c | 19 ++++++++++++++-----
  2 files changed, 19 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +5 -0
index c6bfbf8..92b4046 100644
@@ -7085,12 +7085,17 @@ enum {
  #define GEN6_RC6pp_THRESHOLD			_MMIO(0xA0C0)
  #define GEN6_PMINTRMSK				_MMIO(0xA168)
  #define   GEN8_PMINTR_REDIRECT_TO_NON_DISP	(1<<31)
+#define GEN8_MISC_CTRL0				_MMIO(0xA180)
  #define VLV_PWRDWNUPCTL				_MMIO(0xA294)
  #define GEN9_MEDIA_PG_IDLE_HYSTERESIS		_MMIO(0xA0C4)
  #define GEN9_RENDER_PG_IDLE_HYSTERESIS		_MMIO(0xA0C8)
  #define GEN9_PG_ENABLE				_MMIO(0xA210)
  #define GEN9_RENDER_PG_ENABLE			(1<<0)
  #define GEN9_MEDIA_PG_ENABLE			(1<<1)
+#define GEN8_PUSHBUS_CONTROL			_MMIO(0xA248)
+#define GEN8_PUSHBUS_ENABLE			_MMIO(0xA250)
+#define GEN8_PUSHBUS_SHIFT			_MMIO(0xA25C)
+
 
  #define VLV_CHICKEN_3				_MMIO(VLV_DISPLAY_BASE + 0x7040C)
  #define  PIXEL_OVERLAP_CNT_MASK			(3 << 30)
drivers/gpu/drm/i915/intel_pm.c +7 -5
index 5dce264..fe76991 100644
@@ -5015,11 +5015,20 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
  		enable_rc6 = false;
  	}
 
-	if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE |
-					    GEN6_RC_CTL_HW_ENABLE)) &&
-	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) ||
-	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by BIOS.\n");
+	if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
+	    !I915_READ(GEN8_PUSHBUS_ENABLE) ||
+	    !I915_READ(GEN8_PUSHBUS_SHIFT)) {
+		DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
+		enable_rc6 = false;
+	}
+

drivers/gpu/drm/i915/intel_pm.c static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv) · line 5034

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +7 -0
+	if (!I915_READ(GEN6_GFXPAUSE)) {
+		DRM_DEBUG_DRIVER("GFX pause not setup properly.\n");
+		enable_rc6 = false;
+	}
+
+	if (!I915_READ(GEN8_MISC_CTRL0)) {
+		DRM_DEBUG_DRIVER("GPM control not setup properly.\n");
  		enable_rc6 = false;
  	}
 

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#3 lore raw

Re: [PATCH 2/2] drm/i915/bxt: Fix sanity check for BIOS RC6 setup

Quoted 2 lines · Sagar A

Have seen BIOS having option "RC6" disabled and "GTPM" enabled for cases where there are RC6 specific issues.

It's possible although I haven't seen any based on the specs I have and the tests I ran. In any case the checks I added should catch any such missing setup and if there is something on top of that we need to add those (along with an update to the specification).

Quoted 1 line

GTPM option entails setup for other features as well I guess.

Yes, it affects RPS setup too, but my point was that disabling it is what leaves RC6 unconfigured. I guess this doesn't really matter in the end, the main thing is that we check all the RC6 specific registers.

Quoted 2 lines

In such cases - Can we output some DRM_INFO log saying BIOS has disabled RC6 although setup is available.

Yes, can add that, but since it's something we'd need for debugging I'd use DRM_DEBUG.

Quoted 4 lines

Do we need to also check for other unit level clock gating register setup done by BIOS like: GEN7_MISCCPCTL, GEN6_UCGCTL1 to GEN6_UCGCTL4,
GEN8_UCGCTL6 etc.

These are subject to change with later HW steppings. In any case their default value is the more conservative scenario with clock gating disabled, which should still allow RC6 functionality. They can be also enabled/disabled separately from the GTPM option in BIOS setup (via sub-options to GTPM), something we haven't checked so far anyway.

Are you ok if I add a debug print for these too?

--Imre

Quoted 91 lines

Thanks
Sagar

Quoted 85 lines · Imre Deak

BXT BIOS has two options related to GPU power management:
"RC6(Render
Standby)" and "GT PM Support". The assumption so far was that disabling
either of these options would leave RC6 uninitialized. According to my
tests this isn't so: for a proper RC6 setup we only need the "GT PM Support" option to be enabled while the "RC6" option only controls whether RC6 is left enabled or not by BIOS. OTOH we were missing a few
checks to ensure a proper RC6 setup. Add these now and don't fail the
sanity check if RC6 is disabled. This fixes a problem where RC6 remains
disabled after reloading the driver, since we explicitly disable RC6
during unloading.

CC Sagar Arun Kamble <[email protected]>

---
  drivers/gpu/drm/i915/i915_reg.h |  5 +++++ drivers/gpu/drm/i915/intel_pm.c | 19 ++++++++++++++-----

  2 files changed, 19 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index c6bfbf8..92b4046 100644
@@ -7085,12 +7085,17 @@ enum {
   #define GEN6_RC6pp_THRESHOLD			_MMIO(0xA0C0)
   #define GEN6_PMINTRMSK				_MMIO(0xA16
 8)
   #define   GEN8_PMINTR_REDIRECT_TO_NON_DISP	(1<<31)
+#define GEN8_MISC_CTRL0				_MMIO(0xA18
 0)
   #define VLV_PWRDWNUPCTL				_MMIO(0xA2
 94)
   #define GEN9_MEDIA_PG_IDLE_HYSTERESIS		_MMIO(0xA0C4
 )
   #define GEN9_RENDER_PG_IDLE_HYSTERESIS		_MMIO(0xA0C
 8)
   #define GEN9_PG_ENABLE				_MMIO(0xA21

0)
  #define GEN9_RENDER_PG_ENABLE (1<<0)
  #define GEN9_MEDIA_PG_ENABLE (1<<1)

drivers/gpu/drm/i915/i915_reg.h +4 -0
+#define GEN8_PUSHBUS_CONTROL			_MMIO(0xA248)
+#define GEN8_PUSHBUS_ENABLE			_MMIO(0xA250)
+#define GEN8_PUSHBUS_SHIFT			_MMIO(0xA25C)
+


  #define VLV_CHICKEN_3 _MMIO(VLV_DI
SPLAY_BASE + 0x7040C)
  #define  PIXEL_OVERLAP_CNT_MASK (3 << 30)

drivers/gpu/drm/i915/intel_pm.c +0 -0
index 5dce264..fe76991 100644
@@ -5015,11 +5015,20 @@ static bool bxt_check_bios_rc6_setup(struct
 drm_i915_private *dev_priv)
   		enable_rc6 = false;
   	}

drivers/gpu/drm/i915/intel_pm.c +0 -1
-	if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE

|

drivers/gpu/drm/i915/intel_pm.c +0 -1
-					    GEN6_RC_CTL_HW_ENABLE)

) &&

drivers/gpu/drm/i915/intel_pm.c +0 -1
-	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE)

||

drivers/gpu/drm/i915/intel_pm.c +0 -2
-	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by

BIOS.\n");

drivers/gpu/drm/i915/intel_pm.c +9 -0
+	if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
+	    !I915_READ(GEN8_PUSHBUS_ENABLE) ||
+	    !I915_READ(GEN8_PUSHBUS_SHIFT)) {
+		DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
+		enable_rc6 = false;
+	}
+
+	if (!I915_READ(GEN6_GFXPAUSE)) {
+		DRM_DEBUG_DRIVER("GFX pause not setup

properly.\n");

drivers/gpu/drm/i915/intel_pm.c +1 -0
+		enable_rc6 = false;
Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +4 -0
+	}
+
+	if (!I915_READ(GEN8_MISC_CTRL0)) {
+		DRM_DEBUG_DRIVER("GPM control not setup

properly.\n");
   enable_rc6 = false;
   }

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by
#4 lore raw

Re: [PATCH 2/2] drm/i915/bxt: Fix sanity check for BIOS RC6 setup

Quoted 10 lines · Imre Deak
Quoted 2 lines · Sagar A

Have seen BIOS having option "RC6" disabled and "GTPM" enabled for cases where there are RC6 specific issues.

It's possible although I haven't seen any based on the specs I have and the tests I ran. In any case the checks I added should catch any such missing setup and if there is something on top of that we need to add those (along with an update to the specification).

Quoted 1 line

GTPM option entails setup for other features as well I guess.

Quoted 8 lines

Yes, it affects RPS setup too, but my point was that disabling it is what leaves RC6 unconfigured. I guess this doesn't really matter in the end, the main thing is that we check all the RC6 specific registers.

Quoted 2 lines

In such cases - Can we output some DRM_INFO log saying BIOS has disabled RC6 although setup is available.

Yes, can add that, but since it's something we'd need for debugging I'd use DRM_DEBUG.

Fine. With this:

Quoted 5 lines
Quoted 5 lines

Do we need to also check for other unit level clock gating register setup done by BIOS like: GEN7_MISCCPCTL, GEN6_UCGCTL1 to GEN6_UCGCTL4,
GEN8_UCGCTL6 etc.

Quoted 7 lines

These are subject to change with later HW steppings. In any case their default value is the more conservative scenario with clock gating disabled, which should still allow RC6 functionality. They can be also enabled/disabled separately from the GTPM option in BIOS setup (via sub-options to GTPM), something we haven't checked so far anyway.

Are you ok if I add a debug print for these too?

We can skip given that these are not so much impacting RC6 as you said.

Quoted 93 lines

--Imre

Quoted 90 lines

Thanks
Sagar

Quoted 85 lines · Imre Deak

BXT BIOS has two options related to GPU power management:
"RC6(Render
Standby)" and "GT PM Support". The assumption so far was that disabling
either of these options would leave RC6 uninitialized. According to my
tests this isn't so: for a proper RC6 setup we only need the "GT PM Support" option to be enabled while the "RC6" option only controls whether RC6 is left enabled or not by BIOS. OTOH we were missing a few
checks to ensure a proper RC6 setup. Add these now and don't fail the
sanity check if RC6 is disabled. This fixes a problem where RC6 remains
disabled after reloading the driver, since we explicitly disable RC6
during unloading.

CC Sagar Arun Kamble <[email protected]>
---
   drivers/gpu/drm/i915/i915_reg.h |  5 +++++
   drivers/gpu/drm/i915/intel_pm.c | 19 ++++++++++++++-----
   2 files changed, 19 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index c6bfbf8..92b4046 100644
@@ -7085,12 +7085,17 @@ enum {
   #define GEN6_RC6pp_THRESHOLD			_MMIO(0xA0C0)
   #define GEN6_PMINTRMSK				_MMIO(0xA16
 8)
   #define   GEN8_PMINTR_REDIRECT_TO_NON_DISP	(1<<31)
+#define GEN8_MISC_CTRL0				_MMIO(0xA18
 0)
   #define VLV_PWRDWNUPCTL				_MMIO(0xA2
 94)
   #define GEN9_MEDIA_PG_IDLE_HYSTERESIS		_MMIO(0xA0C4
 )
   #define GEN9_RENDER_PG_IDLE_HYSTERESIS		_MMIO(0xA0C
 8)
   #define GEN9_PG_ENABLE				_MMIO(0xA21

0)

   #define GEN9_RENDER_PG_ENABLE			(1<<0)
   #define GEN9_MEDIA_PG_ENABLE			(1<<1)
drivers/gpu/drm/i915/i915_reg.h +4 -0
+#define GEN8_PUSHBUS_CONTROL			_MMIO(0xA248)
+#define GEN8_PUSHBUS_ENABLE			_MMIO(0xA250)
+#define GEN8_PUSHBUS_SHIFT			_MMIO(0xA25C)
+
 
   #define VLV_CHICKEN_3				_MMIO(VLV_DI

SPLAY_BASE + 0x7040C)
#define PIXEL_OVERLAP_CNT_MASK (3 << 30)

drivers/gpu/drm/i915/intel_pm.c +0 -1
index 5dce264..fe76991 100644
@@ -5015,11 +5015,20 @@ static bool bxt_check_bios_rc6_setup(struct
 drm_i915_private *dev_priv)
   		enable_rc6 = false;
   	}
 
-	if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE

|

drivers/gpu/drm/i915/intel_pm.c +0 -1
-					    GEN6_RC_CTL_HW_ENABLE)

) &&

drivers/gpu/drm/i915/intel_pm.c +0 -1
-	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE)

||

drivers/gpu/drm/i915/intel_pm.c +0 -2
-	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by

BIOS.\n");

drivers/gpu/drm/i915/intel_pm.c +9 -0
+	if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
+	    !I915_READ(GEN8_PUSHBUS_ENABLE) ||
+	    !I915_READ(GEN8_PUSHBUS_SHIFT)) {
+		DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
+		enable_rc6 = false;
+	}
+
+	if (!I915_READ(GEN6_GFXPAUSE)) {
+		DRM_DEBUG_DRIVER("GFX pause not setup

properly.\n");

drivers/gpu/drm/i915/intel_pm.c +1 -0
+		enable_rc6 = false;
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/intel_pm.c +4 -0
+	}
+
+	if (!I915_READ(GEN8_MISC_CTRL0)) {
+		DRM_DEBUG_DRIVER("GPM control not setup
properly.\n");
   		enable_rc6 = false;
   	}

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✓ Ro.CI.BAT: success for series starting with [1/2] drm/i915: Fix log type for RC6 debug messages

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: series starting with [1/2] drm/i915: Fix log type for RC6 debug messages
URL : https://patchwork.freedesktop.org/series/9285/
State : success

== Summary ==

Series 9285v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/9285/revisions/1/mbox

Test kms_pipe_crc_basic:

        Subgroup suspend-read-crc-pipe-c:
                dmesg-warn -> SKIP       (ro-bdw-i5-5250u)
fi-skl-i5-6260u  total:229  pass:202  dwarn:0   dfail:0   fail:2   skip:25 
fi-snb-i7-2600   total:229  pass:174  dwarn:0   dfail:0   fail:2   skip:53 
ro-bdw-i5-5250u  total:229  pass:202  dwarn:2   dfail:1   fail:2   skip:22 
ro-bdw-i7-5557U  total:229  pass:202  dwarn:1   dfail:1   fail:2   skip:23 
ro-bdw-i7-5600u  total:229  pass:190  dwarn:0   dfail:1   fail:0   skip:38 
ro-byt-n2820     total:229  pass:178  dwarn:0   dfail:1   fail:5   skip:45 
ro-hsw-i3-4010u  total:229  pass:195  dwarn:0   dfail:1   fail:2   skip:31 
ro-hsw-i7-4770r  total:229  pass:195  dwarn:0   dfail:1   fail:2   skip:31 
ro-ilk-i7-620lm  total:229  pass:155  dwarn:0   dfail:1   fail:3   skip:70 
ro-ilk1-i5-650   total:224  pass:155  dwarn:0   dfail:1   fail:3   skip:65 
ro-ivb-i7-3770   total:229  pass:186  dwarn:0   dfail:1   fail:2   skip:40 
ro-ivb2-i7-3770  total:229  pass:190  dwarn:0   dfail:1   fail:2   skip:36 
ro-skl3-i5-6260u total:229  pass:206  dwarn:1   dfail:1   fail:2   skip:19 
ro-snb-i7-2620M  total:229  pass:179  dwarn:0   dfail:1   fail:1   skip:48 

fi-kbl-qkkr failed to connect after reboot
fi-skl-i7-6700k failed to connect after reboot
ro-bsw-n3050 failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1334/

8a6521c drm-intel-nightly: 2016y-06m-29d-16h-08m-16s UTC integration manifest 4595c784 drm/i915/bxt: Fix sanity check for BIOS RC6 setup 52064d0 drm/i915: Fix log type for RC6 debug messages

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#6 lore raw

Re: ✓ Ro.CI.BAT: success for series starting with [1/2] drm/i915: Fix log type for RC6 debug messages

Quoted 6 lines · Patchwork

== Series Details ==

Series: series starting with [1/2] drm/i915: Fix log type for RC6 debug messages
URL   : https://patchwork.freedesktop.org/series/9285/
State : success

Thanks for the review, I pushed the patches to -dinq.

Quoted 41 lines

== Summary ==

Series 9285v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/9285/revisions/1/mbox

Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-c:
                dmesg-warn -> SKIP       (ro-bdw-i5-5250u)

fi-skl-i5-
6260u  total:229  pass:202  dwarn:0   dfail:0   fail:2   skip:25 fi-snb-i7-
2600   total:229  pass:174  dwarn:0   dfail:0   fail:2   skip:53 ro-bdw-i5-
5250u  total:229  pass:202  dwarn:2   dfail:1   fail:2   skip:22 ro-bdw-i7-
5557U  total:229  pass:202  dwarn:1   dfail:1   fail:2   skip:23 ro-bdw-i7-
5600u  total:229  pass:190  dwarn:0   dfail:1   fail:0   skip:38 ro-byt-
n2820     total:229  pass:178  dwarn:0   dfail:1   fail:5   skip:45 ro-hsw-i3-
4010u  total:229  pass:195  dwarn:0   dfail:1   fail:2   skip:31 ro-hsw-i7-
4770r  total:229  pass:195  dwarn:0   dfail:1   fail:2   skip:31 ro-ilk-i7-
620lm  total:229  pass:155  dwarn:0   dfail:1   fail:3   skip:70 ro-ilk1-i5-
650   total:224  pass:155  dwarn:0   dfail:1   fail:3   skip:65 ro-ivb-i7-
3770   total:229  pass:186  dwarn:0   dfail:1   fail:2   skip:40 ro-ivb2-i7-
3770  total:229  pass:190  dwarn:0   dfail:1   fail:2   skip:36 ro-skl3-i5-6260u
total:229  pass:206  dwarn:1   dfail:1   fail:2   skip:19 ro-snb-i7-
2620M  total:229  pass:179  dwarn:0   dfail:1   fail:1   skip:48 fi-kbl-qkkr failed to connect after reboot fi-skl-i7-6700k failed to connect after reboot ro-bsw-n3050 failed to connect after reboot

Quoted 7 lines

Results at /archive/results/CI_IGT_test/RO_Patchwork_1334/

8a6521c drm-intel-nightly: 2016y-06m-29d-16h-08m-16s UTC integration manifest
4595c784 drm/i915/bxt: Fix sanity check for BIOS RC6 setup 52064d0 drm/i915: Fix log type for RC6 debug messages

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/2
#7 lore raw
In reply to Imre Deak
Quoted 73 lines · Imre Deak

RC6 isn't really a KMS feature, so use the more proper DRIVER log type for RC6 related debug messages.

CC Sagar Arun Kamble <[email protected]>
---
  drivers/gpu/drm/i915/intel_pm.c | 26 ++++++++++++++------------
  1 file changed, 14 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +11 -10
index d7f8ba8..5dce264 100644
@@ -4973,14 +4973,15 @@ static void intel_print_rc6_info(struct drm_i915_private *dev_priv, u32 mode)
  			mode = 0;
  	}
  	if (HAS_RC6p(dev_priv))
-		DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s RC6p %s RC6pp %s\n",
-			      onoff(mode & GEN6_RC_CTL_RC6_ENABLE),
-			      onoff(mode & GEN6_RC_CTL_RC6p_ENABLE),
-			      onoff(mode & GEN6_RC_CTL_RC6pp_ENABLE));
+		DRM_DEBUG_DRIVER("Enabling RC6 states: "
+				 "RC6 %s RC6p %s RC6pp %s\n",
+				 onoff(mode & GEN6_RC_CTL_RC6_ENABLE),
+				 onoff(mode & GEN6_RC_CTL_RC6p_ENABLE),
+				 onoff(mode & GEN6_RC_CTL_RC6pp_ENABLE));
 
  	else
-		DRM_DEBUG_KMS("Enabling RC6 states: RC6 %s\n",
-			      onoff(mode & GEN6_RC_CTL_RC6_ENABLE));
+		DRM_DEBUG_DRIVER("Enabling RC6 states: RC6 %s\n",
+				 onoff(mode & GEN6_RC_CTL_RC6_ENABLE));
  }
 
  static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
@@ -4990,7 +4991,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
  	unsigned long rc6_ctx_base;
 
  	if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
-		DRM_DEBUG_KMS("RC6 Base location not set properly.\n");
+		DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n");
  		enable_rc6 = false;
  	}
 
@@ -5002,7 +5003,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
  	if (!((rc6_ctx_base >= ggtt->stolen_reserved_base) &&
  	      (rc6_ctx_base + PAGE_SIZE <= ggtt->stolen_reserved_base +
  					ggtt->stolen_reserved_size))) {
-		DRM_DEBUG_KMS("RC6 Base address not as expected.\n");
+		DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n");
  		enable_rc6 = false;
  	}
 
@@ -5010,7 +5011,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
  	      ((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) &&
  	      ((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) &&
  	      ((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) {
-		DRM_DEBUG_KMS("Engine Idle wait time not set properly.\n");
+		DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n");
  		enable_rc6 = false;
  	}
 
@@ -5018,7 +5019,7 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
  					    GEN6_RC_CTL_HW_ENABLE)) &&
  	    ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) ||
  	     !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) {
-		DRM_DEBUG_KMS("HW/SW RC6 is not enabled by BIOS.\n");
+		DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by BIOS.\n");
  		enable_rc6 = false;
  	}
 
@@ -5050,8 +5051,9 @@ int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6)
  			mask = INTEL_RC6_ENABLE;

drivers/gpu/drm/i915/intel_pm.c int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6) · line 5059

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +3 -2
 
  		if ((enable_rc6 & mask) != enable_rc6)
-			DRM_DEBUG_KMS("Adjusting RC6 mask to %d (requested %d, valid %d)\n",
-				      enable_rc6 & mask, enable_rc6, mask);
+			DRM_DEBUG_DRIVER("Adjusting RC6 mask to %d "
+					 "(requested %d, valid %d)\n",
+					 enable_rc6 & mask, enable_rc6, mask);
 
  		return enable_rc6 & mask;
  	}

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx