drm/i915: compile-time consistency check on __EXEC_OBJECT flags
Subsystems (3)
PATCH 1/2 drm/i915: compile-time consistency check on __EXEC_OBJECT flags
Two different sets of flag bits are stored in the 'flags' member of a 'struct drm_i915_gem_exec_object2', and they're defined in two different source files, increasing the risk of an accidental clash.
Some flags in this field are supplied by the user; these are defined in i915_drm.h, and they start from the LSB and work up.
Other flags are defined in i915_gem_execbuffer, for internal use within that file only; they start from the MSB and work down.
So here we add a compile-time check that the two sets of flags do not overlap, which would cause all sorts of confusion.
--- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 12 ++++++++---- include/uapi/drm/i915_drm.h | 11 ++++++----- 2 files changed, 14 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +8 -4
@@ -34,10 +34,11 @@#include <linux/dma_remapping.h> #include <linux/uaccess.h> -#define __EXEC_OBJECT_HAS_PIN (1<<31) -#define __EXEC_OBJECT_HAS_FENCE (1<<30) -#define __EXEC_OBJECT_NEEDS_MAP (1<<29) -#define __EXEC_OBJECT_NEEDS_BIAS (1<<28) +#define __EXEC_OBJECT_HAS_PIN (1<<31) +#define __EXEC_OBJECT_HAS_FENCE (1<<30) +#define __EXEC_OBJECT_NEEDS_MAP (1<<29) +#define __EXEC_OBJECT_NEEDS_BIAS (1<<28) +#define __EXEC_OBJECT_INTERNAL_FLAGS (0xf<<28)/* all of the above */ #define BATCH_OFFSET_BIAS (256*1024)
@@ -1007,6 +1008,9 @@ static bool only_mappable_for_reloc(unsigned int flags)unsigned invalid_flags;int i; +/* INTERNAL flags must not overlap with external ones */ +BUILD_BUG_ON (__EXEC_OBJECT_INTERNAL_FLAGS & ~__EXEC_OBJECT_UNKNOWN_FLAGS); + invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS;if (USES_FULL_PPGTT (dev)) invalid_flags |=EXEC_OBJECT_NEEDS_GTT ;
include/uapi/drm/i915_drm.h +6 -5
@@ -696,12 +696,13 @@ struct drm_i915_gem_exec_object2 {*/ __u64 offset; -#define EXEC_OBJECT_NEEDS_FENCE (1<<0) -#define EXEC_OBJECT_NEEDS_GTT (1<<1) -#define EXEC_OBJECT_WRITE (1<<2) +#define EXEC_OBJECT_NEEDS_FENCE (1<<0) +#define EXEC_OBJECT_NEEDS_GTT (1<<1) +#define EXEC_OBJECT_WRITE (1<<2)#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3) -#define EXEC_OBJECT_PINNED (1<<4) -#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_PINNED<<1) +#define EXEC_OBJECT_PINNED (1<<4) +/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */ +#define __EXEC_OBJECT_UNKNOWN_FLAGS (-(EXEC_OBJECT_PINNED<<1))__u64 flags;__u64 rsvd1;
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: refactor eb_get_batch()
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of eb_get_batch() into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.
Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"
in the new eb_get_batch_vma() and of course add an explanatory comment.
--- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 49 ++++++++++++++++++------------ 1 file changed, 29 insertions(+), 20 deletions(-)
drivers/gpu/drm/i915/i915_gem_execbuffer.c +29 -20
@@ -186,6 +186,35 @@ struct eb_vmas {return ret; } +static inline struct i915_vma * +eb_get_batch_vma (struct eb_vmas *eb) +{ +/* The batch is always the LAST item in the VMA list */ +struct i915_vma *vma =list_last_entry (&eb->vmas,typeof (*vma), exec_list); + +return vma; +} + +static struct drm_i915_gem_object * +eb_get_batch (struct eb_vmas *eb) +{ +struct i915_vma *vma =eb_get_batch_vma (eb); + +/* +* SNA is doing fancy tricks with compressing batch buffers, which leads +* to negative relocation deltas. Usually that works out ok since the +* relocate address is still positive, except when the batch is placed +* very low in the GTT. Ensure this doesn't happen. +* +* Note that actual hangs have only been observed on gen7, but for +* paranoia do it everywhere. +*/ +if ((vma->exec_entry->flags &EXEC_OBJECT_PINNED ) ==0 ) + vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; + +return vma->obj; +} +static struct i915_vma *eb_get_vma (struct eb_vmas *eb,unsigned long handle) {if (eb->and <0 ) {
@@ -1341,26 +1370,6 @@ static bool only_mappable_for_reloc(unsigned int flags)return file_priv->bsd_ring; } -static struct drm_i915_gem_object * -eb_get_batch (struct eb_vmas *eb) -{ -struct i915_vma *vma =list_entry (eb->vmas.prev,typeof (*vma), exec_list); - -/* -* SNA is doing fancy tricks with compressing batch buffers, which leads -* to negative relocation deltas. Usually that works out ok since the -* relocate address is still positive, except when the batch is placed -* very low in the GTT. Ensure this doesn't happen. -* -* Note that actual hangs have only been observed on gen7, but for -* paranoia do it everywhere. -*/ -if ((vma->exec_entry->flags &EXEC_OBJECT_PINNED ) ==0 ) - vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; - -return vma->obj; -} -#define I915_USER_RINGS (4)static const enum intel_engine_id user_ring_map[I915_USER_RINGS +1 ] = {
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 10 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
Quoted 7 lines
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.Signed-off-by Dave Gordon <[email protected]>
I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
Quoted 78 lines
--- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 49 ++++++++++++++++++------------ 1 file changed, 29 insertions(+), 20 deletions(-)drivers/gpu/drm/i915/i915_gem_execbuffer.c +29
-20@@ -186,6 +186,35 @@ struct eb_vmas {return ret; } +static inline struct i915_vma * +eb_get_batch_vma (struct eb_vmas *eb) +{ +/* The batch is always the LAST item in the VMA list */ +struct i915_vma *vma =list_last_entry (&eb->vmas,typeof (*vma), exec_list); + +return vma; +} + +static struct drm_i915_gem_object * +eb_get_batch (struct eb_vmas *eb) +{ +struct i915_vma *vma =eb_get_batch_vma (eb); + +/* +* SNA is doing fancy tricks with compressing batch buffers, which leads +* to negative relocation deltas. Usually that works out ok since the +* relocate address is still positive, except when the batch is placed +* very low in the GTT. Ensure this doesn't happen. +* +* Note that actual hangs have only been observed on gen7, but for +* paranoia do it everywhere. +*/ +if ((vma->exec_entry->flags &EXEC_OBJECT_PINNED ) ==0 ) + vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; + +return vma->obj; +} +static struct i915_vma *eb_get_vma (struct eb_vmas *eb,unsigned long handle) {if (eb->and <0 ) {@@ -1341,26 +1370,6 @@ static bool only_mappable_for_reloc(unsigned int flags)return file_priv->bsd_ring; } -static struct drm_i915_gem_object * -eb_get_batch (struct eb_vmas *eb) -{ -struct i915_vma *vma =list_entry (eb->vmas.prev,typeof (*vma), exec_list); - -/* -* SNA is doing fancy tricks with compressing batch buffers, which leads -* to negative relocation deltas. Usually that works out ok since the -* relocate address is still positive, except when the batch is placed -* very low in the GTT. Ensure this doesn't happen. -* -* Note that actual hangs have only been observed on gen7, but for -* paranoia do it everywhere. -*/ -if ((vma->exec_entry->flags &EXEC_OBJECT_PINNED ) ==0 ) - vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; - -return vma->obj; -} -#define I915_USER_RINGS (4)static const enum intel_engine_id user_ring_map[I915_USER_RINGS +1 ] = {Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.
Quoted 4 lines
Quoted 1 line
Signed-off-by Dave Gordon <[email protected]>I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
It won't help though, so this is just churn for no purpose. -Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 18 lines · Chris Wilson
Quoted 17 lines · Daniel Vetter
Quoted 16 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Signed-off-by Dave Gordon <[email protected]>I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
It won't help though, so this is just churn for no purpose. -Chris
At the very least, it replaces a confusing construct with a comprehensible one annotated with an explanatory comment.
Separating finding the VMA for the batch from finding the batch itself also improves clarity and costs nothing (compiler inlines it anyway).
Comprehensibility -- and hence maintainability -- is always a worthwhile purpose :)
BTW, do the comments in this code from patch
d23db88 drm/i915: Prevent negative relocation deltas from wrapping
still apply? 'Cos I think it's pretty ugly to be setting a flag on a VMA as a side-effect of a "lookup" type operation :( Surely cleaner to do that sort of think at the top level i.e. inside i915_gem_do_execbuffer() ?
.Dave.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 21 lines · Dave Gordon
Quoted 20 lines · Chris Wilson
Quoted 19 lines · Daniel Vetter
Quoted 17 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.Signed-off-by Dave Gordon <[email protected]>
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
It won't help though, so this is just churn for no purpose. -Chris
At the very least, it replaces a confusing construct with a comprehensible one annotated with an explanatory comment.
No. It deepens a confusion in the code that I've been trying to get removed over the last couple of years.
Quoted 2 lines
Separating finding the VMA for the batch from finding the batch itself also improves clarity and costs nothing (compiler inlines it anyway).
No. That's the confusion you have here. The object is irrelevant.
Quoted 2 lines
Comprehensibility -- and hence maintainability -- is always a worthwhile purpose :)
s/comprehensibility/greater confusion/
Quoted 8 lines
BTW, do the comments in this code from patch
d23db88 drm/i915: Prevent negative relocation deltas from wrapping
still apply? 'Cos I think it's pretty ugly to be setting a flag on a VMA as a side-effect of a "lookup" type operation :( Surely cleaner to do that sort of think at the top level i.e. inside
i915_gem_do_execbuffer()?
The comment is wrong since the practice is more widespread and it is a particular hw bug on Ivybridge.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 25 lines · Chris Wilson
Quoted 24 lines · Dave Gordon
Quoted 23 lines · Chris Wilson
Quoted 21 lines · Daniel Vetter
Quoted 10 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
Quoted 7 lines
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.Signed-off-by Dave Gordon <[email protected]>I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
It won't help though, so this is just churn for no purpose. -Chris
At the very least, it replaces a confusing construct with a comprehensible one annotated with an explanatory comment.
No. It deepens a confusion in the code that I've been trying to get removed over the last couple of years.
?
I was referring to the list_{last_}entry() change. That's definitely a clarification as to how things work now. Of course, if you're planning to make the batch the first object rather than the last, I won't object. But whichever it is, let's use the most-appropriately-named of the available list functions when we pick an item from a list. And comment why or what it's doing.
Quoted 4 lines
Quoted 2 lines
Separating finding the VMA for the batch from finding the batch itself also improves clarity and costs nothing (compiler inlines it anyway).
No. That's the confusion you have here. The object is irrelevant.
Ah, so we have a function to return an irrelevant object. Let's just delete it then ;)
Do you think we /should/ just get rid of eb_get_batch()? Maybe just have eb_get_batch_vma() return the VMA to the [single] caller i915_gem_do_execbuffer() instead, and then have /that/ do both the flag-setting ugliness and the indirection to the object (which evidently is not irrelevant to it) ?
Quoted 4 lines
Quoted 2 lines
Comprehensibility -- and hence maintainability -- is always a worthwhile purpose :)
s/comprehensibility/greater confusion/
Spoken like a true Discordian ;)
Quoted 4 lines
Quoted 4 lines
BTW, do the comments in this code from patch
d23db88 drm/i915: Prevent negative relocation deltas from wrapping
Quoted 8 lines
Quoted 4 lines
still apply? 'Cos I think it's pretty ugly to be setting a flag on a VMA as a side-effect of a "lookup" type operation :( Surely cleaner to do that sort of think at the top level i.e. inside
i915_gem_do_execbuffer()?The comment is wrong since the practice is more widespread and it is a particular hw bug on Ivybridge.
-Chris
Another reason to move it out to the caller and update the comments in the process!
.Dave.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: refactor eb_get_batch()
Quoted 74 lines · Dave Gordon
Quoted 25 lines · Chris Wilson
Quoted 24 lines · Dave Gordon
Quoted 23 lines · Chris Wilson
Quoted 21 lines · Daniel Vetter
Quoted 10 lines · Dave Gordon
Precursor for fix to secure batch execution. We will need to be able to retrieve the batch VMA (as well as the batch itself) from the eb list, so this patch extracts that part of
eb_get_batch()into a separate function, and moves both parts to a more logical place in the file, near where the eb list is created.Also, it may not be obvious, but the current execbuffer2 ioctl interface requires that the buffer object containing the batch-to-be-executed be the LAST entry in the exec2_list[] array (I expected it to be the first!).
Quoted 7 lines
To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)" in the old version of eb_get_batch() with the equivalent but more explicit "list_last_entry(&eb->vmas,...)"in the new
eb_get_batch_vma()and of course add an explanatory comment.Signed-off-by Dave Gordon <[email protected]>I have no context on the secure batch fix you're talking about, but this here makes sense as an independent cleanup.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
It won't help though, so this is just churn for no purpose. -Chris
At the very least, it replaces a confusing construct with a comprehensible one annotated with an explanatory comment.
No. It deepens a confusion in the code that I've been trying to get removed over the last couple of years.
?
I was referring to the list_{last_}entry() change. That's definitely a clarification as to how things work now. Of course, if you're planning to make the batch the first object rather than the last, I won't object. But whichever it is, let's use the most-appropriately-named of the available list functions when we pick an item from a list. And comment why or what it's doing.
Quoted 4 lines
Quoted 2 lines
Separating finding the VMA for the batch from finding the batch itself also improves clarity and costs nothing (compiler inlines it anyway).
No. That's the confusion you have here. The object is irrelevant.
Ah, so we have a function to return an irrelevant object. Let's just delete it then ;)
Do you think we /should/ just get rid of
eb_get_batch()? Maybe just haveeb_get_batch_vma()return the VMA to the [single] calleri915_gem_do_execbuffer()instead, and then have /that/ do both the flag-setting ugliness and the indirection to the object (which evidently is not irrelevant to it) ?Quoted 4 lines
Quoted 2 lines
Comprehensibility -- and hence maintainability -- is always a worthwhile purpose :)
s/comprehensibility/greater confusion/
Spoken like a true Discordian ;)
Quoted 9 lines
Quoted 8 lines
BTW, do the comments in this code from patch
d23db88 drm/i915: Prevent negative relocation deltas from wrapping
still apply? 'Cos I think it's pretty ugly to be setting a flag on a VMA as a side-effect of a "lookup" type operation :( Surely cleaner to do that sort of think at the top level i.e. inside
i915_gem_do_execbuffer()?
Quoted 6 lines
Quoted 3 lines
The comment is wrong since the practice is more widespread and it is a particular hw bug on Ivybridge.
-ChrisAnother reason to move it out to the caller and update the comments in the process!
Then review the patches that have already been posted several times on the list to do everything above.
-Chris
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: warning for series starting with [1/2] drm/i915: compile-time consistency check on __EXEC_OBJECT flags
In reply to Dave Gordon== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: compile-time consistency check on __EXEC_OBJECT flags
URL : https://patchwork.freedesktop.org/series/9325/
State : warning
== Summary ==
Series 9325v1 Series without cover letter
http://patchwork.freedesktop.org/api/1.0/series/9325/revisions/1/mbox
Test kms_pipe_crc_basic:
Subgroup nonblocking-crc-pipe-b-frame-sequence:
pass -> SKIP (fi-skl-i5-6260u)
Subgroup read-crc-pipe-c-frame-sequence:
pass -> SKIP (fi-skl-i5-6260u)
Subgroup suspend-read-crc-pipe-a:
skip -> DMESG-WARN (ro-bdw-i7-5557U)fi-kbl-qkkr total:229 pass:160 dwarn:28 dfail:1 fail:0 skip:40 fi-skl-i5-6260u total:229 pass:202 dwarn:0 dfail:0 fail:0 skip:27 fi-skl-i7-6700k total:229 pass:190 dwarn:0 dfail:0 fail:0 skip:39 fi-snb-i7-2600 total:229 pass:176 dwarn:0 dfail:0 fail:0 skip:53 ro-bdw-i5-5250u total:229 pass:204 dwarn:1 dfail:1 fail:0 skip:23 ro-bdw-i7-5557U total:229 pass:204 dwarn:2 dfail:1 fail:0 skip:22 ro-bdw-i7-5600u total:229 pass:190 dwarn:0 dfail:1 fail:0 skip:38 ro-bsw-n3050 total:229 pass:177 dwarn:0 dfail:1 fail:2 skip:49 ro-byt-n2820 total:229 pass:180 dwarn:0 dfail:1 fail:3 skip:45 ro-hsw-i3-4010u total:229 pass:197 dwarn:0 dfail:1 fail:0 skip:31 ro-hsw-i7-4770r total:229 pass:197 dwarn:0 dfail:1 fail:0 skip:31 ro-ilk-i7-620lm total:229 pass:157 dwarn:0 dfail:1 fail:1 skip:70 ro-ilk1-i5-650 total:224 pass:157 dwarn:0 dfail:1 fail:1 skip:65 ro-ivb-i7-3770 total:229 pass:188 dwarn:0 dfail:1 fail:0 skip:40 ro-ivb2-i7-3770 total:229 pass:192 dwarn:0 dfail:1 fail:0 skip:36 ro-skl3-i5-6260u total:229 pass:208 dwarn:1 dfail:1 fail:0 skip:19 ro-snb-i7-2620M total:229 pass:179 dwarn:0 dfail:1 fail:1 skip:48
fi-hsw-i7-4770k failed to connect after reboot
Results at /archive/results/CI_IGT_test/RO_Patchwork_1344/
51ba6a7 drm-intel-nightly: 2016y-06m-30d-15h-06m-59s UTC integration manifest f81c533 drm/i915: refactor eb_get_batch()
ec09fb7 drm/i915: compile-time consistency check on __EXEC_OBJECT flags
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 26 lines · Dave Gordon
Two different sets of flag bits are stored in the 'flags' member of a 'struct
drm_i915_gem_exec_object2', and they're defined in two different source files, increasing the risk of an accidental clash.Some flags in this field are supplied by the user; these are defined in
i915_drm.h, and they start from the LSB and work up.Other flags are defined in
i915_gem_execbuffer, for internal use within that file only; they start from the MSB and work down.So here we add a compile-time check that the two sets of flags do not overlap, which would cause all sorts of confusion.
Signed-off-by Dave Gordon <[email protected]>--- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 12 ++++++++---- include/uapi/drm/i915_drm.h | 11 ++++++----- 2 files changed, 14 insertions(+), 9 deletions(-)drivers/gpu/drm/i915/i915_gem_execbuffer.c +0
-0@@ -34,10 +34,11 @@#include <linux/dma_remapping.h> #include <linux/uaccess.h>
drivers/gpu/drm/i915/i915_gem_execbuffer.c line 41
Quoted 10 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +5
-4-#define __EXEC_OBJECT_HAS_PIN (1<<31) -#define __EXEC_OBJECT_HAS_FENCE (1<<30) -#define __EXEC_OBJECT_NEEDS_MAP (1<<29) -#define __EXEC_OBJECT_NEEDS_BIAS (1<<28) +#define __EXEC_OBJECT_HAS_PIN (1<<31) +#define __EXEC_OBJECT_HAS_FENCE (1<<30) +#define __EXEC_OBJECT_NEEDS_MAP (1<<29) +#define __EXEC_OBJECT_NEEDS_BIAS (1<<28) +#define __EXEC_OBJECT_INTERNAL_FLAGS (0xf<<28)/* all of the above */
s/(0xf<<28)/(~(__EXEC_OBJECT_NEEDS_BIAS-1))/ if you feel like, with the comment retained. Either way:
Quoted 43 lines
drivers/gpu/drm/i915/i915_gem_execbuffer.c +3
-0#define BATCH_OFFSET_BIAS (256*1024)@@ -1007,6 +1008,9 @@ static bool only_mappable_for_reloc(unsigned int flags)unsigned invalid_flags;int i; +/* INTERNAL flags must not overlap with external ones */ +BUILD_BUG_ON (__EXEC_OBJECT_INTERNAL_FLAGS & ~__EXEC_OBJECT_UNKNOWN_FLAGS); + invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS;if (USES_FULL_PPGTT (dev)) invalid_flags |=EXEC_OBJECT_NEEDS_GTT ;include/uapi/drm/i915_drm.h +6
-5@@ -696,12 +696,13 @@ struct drm_i915_gem_exec_object2 {*/ __u64 offset; -#define EXEC_OBJECT_NEEDS_FENCE (1<<0) -#define EXEC_OBJECT_NEEDS_GTT (1<<1) -#define EXEC_OBJECT_WRITE (1<<2) +#define EXEC_OBJECT_NEEDS_FENCE (1<<0) +#define EXEC_OBJECT_NEEDS_GTT (1<<1) +#define EXEC_OBJECT_WRITE (1<<2)#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3) -#define EXEC_OBJECT_PINNED (1<<4) -#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_PINNED<<1) +#define EXEC_OBJECT_PINNED (1<<4) +/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */ +#define __EXEC_OBJECT_UNKNOWN_FLAGS (-(EXEC_OBJECT_PINNED<<1))__u64 flags;__u64 rsvd1;Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx