Skip to contentSkip to conversation

Provide a QOM-based authorization API

PATCH Superseded Daniel P. Berrange 2 participants 11 messages Jul 5, 2016 – Jul 14, 2016

Subsystems (2)

v7 of 14 Superseded Latest is v14 →

lore
Share & tools
lore
#0 lore raw

v7 cover Provide a QOM-based authorization API

This is a followup of previously posted work in 2.6 cycle:

v1: https://lists.gnu.org/archive/html/qemu-devel/2016-02/msg04618.html
v2: https://lists.gnu.org/archive/html/qemu-devel/2016-03/msg01454.html
v3: https://lists.gnu.org/archive/html/qemu-devel/2016-03/msg02498.html
v4: https://lists.gnu.org/archive/html/qemu-devel/2016-05/msg01661.html
v5: https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg00485.html
v6: https://lists.gnu.org/archive/html/qemu-devel/2016-06/msg03876.html

Many years ago I was responsible for adding the 'qemu_acl' type and associated HMP commands. Looking back at it now, it is quite a poor facility with a couple of bad limitations. First, the responsibility for creating the ACLs was left with the QEMU network service (VNC server was only thing ever doing it). This meant you could not share ACLs across multiple services. Second, there was no way to populate ACLs on the command line, you had no choice but to use the HMP commands. Third, the API was hardcoded around the idea of an in-QEMU implementation, leaving no scope for plugging in alternative implementations backed by, for example, LDAP or PAM.

This series introduces a much better authorization API design to QEMU that addresses all these problems, and maintains back compatibility. It of course is based on the QOM framework, so that immediately gives us ability to create objects via the CLI, HMP or QMP. There is an abstract base clss "QAuthZ" which defines the basic API for QEMU network services to use, and a specific implementation "QAuthZ" simple which replicates the functionality of 'qemu_acl'. It is thus possible to add other impls, without changing any other part of QEMU in the future. Finally, the user is responsible for creating the ACL objects, so they can have one ACL associated with all their TLS enabled network services.

There was only one small problem with this, specifically the -object CLI arg and HMP 'object_add' command had no way to let the user specify non-scalar properties for objects. eg if an object had a property which is a list of structs, you are out of luck if you want to create it without using QMP.

Thus the first four patches do some work around QAPI / QOM to make it possible to specify non-scalar properties with the -object CLI arg and HMP 'object_add' command. See the respective patches for illustration of the syntax used. Some of Max's recent block patches also depend on the qdict_crumple method in patch 1.

The patches 5 and 6 introduce the new base class and specific implementation.

Patch 7 kills the old qemu_acl code, updating any existing callers of it to use the QAuthZSimple QOM class instead.

Previously there were further patches adding ACL support for chardevs, migration, nbd, etc. These will be posted later once this core code is merged, so they can flow via the respective maintainer's trees

Changed in v7:

- Misc typos in API docs (Marc-André)
- Fix parsing of properties using type_size visitor (Marc-André)
- Mark based auth class as abstract (Marc-André)
- Fix QAPI version annotations to say 2.7 (Marc-André)

Changed in v6:

- Switch from while() to for() loop for iterating over dicts (Markus)
- Avoid redundant strdup (Markus)
- Rewrap comments at 70 chars (Markus)
- Change qdict_list_size() to qdict_is_list() (Markus)
- Misc docs changes (Markus)
- Change QmpInputVisitor so the code for handling the string types is separate from code using native scalar types (Paolo)
- Centralize code parsing bool strings (Markus)
- Centralize code parsing int strings (Markus)

Changed in v5:

- Resolved conflicts with Eric's visitor refactoring which made it stricter about struct begin/end calls
- Added support for ACLs to migration code now its TLS support is merged.
- Fixed typos in example in commit message

Changed in v4:

- Ensure examples use shell escaping for '*' (Eric)
- Add more tests for crumple impl (Eric)
- Raise error if sasl-acl/tls-acl are requested but sasl/tls auth are not enabled (Eric)
- Document return codes for auth check more clearly (Eric)
- Don't silently turn a glob match into a strcmp if fnmatch is not present (Eric)
- Other misc small typos/fixes (Eric)

Changed in v3:

- Created separate qdict_list_size method (Max)
- Added unit tests for case of empty dict (Max)
- Fix variable names to use underscore separator (Max)
- Fix potential free of uninitialized variables (Max)
- Use QObject APIs for casts, instead of C type casts (Max)

Changed in v2:

- Adapt to changes in qapi visitor APIs
- Add a 'bool recursive' flag to qdict_crumple (Max)
- Fix memory leaks in qdict_crumple (Max)
- Split out key splitting code from qdict_crumple (Max)
- Use saner variable names in qdict_crumple (Max)
- Added some tests for bad inputs to qdict_crumple

Daniel P. Berrange (7):
qdict: implement a qdict_crumple method for un-flattening a dict
option: make parse_option_bool/number non-static
qapi: add a QmpInputVisitor that does string conversion
qom: support arbitrary non-scalar properties with -object
util: add QAuthZ object as an authorization base class
util: add QAuthZSimple object type for a simple access control list
acl: delete existing ACL implementation

 MAINTAINERS                      |   7 +
 Makefile                         |   9 +-
 Makefile.objs                    |   2 +
 Makefile.target                  |   2 +
 crypto/tlssession.c              |  28 +++-
 hmp.c                            |  18 +--
 include/qapi/qmp-input-visitor.h |  42 +++++-
 include/qapi/qmp/qdict.h         |   1 +
 include/qemu/acl.h               |  74 ---------
 include/qemu/authz-simple.h      | 115 ++++++++++++++
 include/qemu/authz.h             |  89 +++++++++++
 include/qemu/option.h            |   4 +
 include/qom/object_interfaces.h  |  10 +-
 monitor.c                        | 181 ++++++++++++++--------
 qapi-schema.json                 |   6 +-
 qapi/opts-visitor.c              |  19 +--
 qapi/qmp-input-visitor.c         | 105 +++++++++++++
 qapi/util.json                   |  47 ++++++
 qmp.c                            |   2 +-
 qobject/qdict.c                  | 283 ++++++++++++++++++++++++++++++++++
 qom/object_interfaces.c          |  49 ++++--
 tests/.gitignore                 |   1 +
 tests/Makefile.include           |   5 +-
 tests/check-qdict.c              | 241 +++++++++++++++++++++++++++++
 tests/check-qom-proplist.c       | 319 ++++++++++++++++++++++++++++++++++++++-
 tests/test-authz-simple.c        | 172 +++++++++++++++++++++
 tests/test-crypto-tlssession.c   |  15 +-
 tests/test-io-channel-tls.c      |  16 +-
 tests/test-qmp-input-visitor.c   | 149 +++++++++++++++++-
 ui/vnc-auth-sasl.c               |   2 +-
 ui/vnc-auth-sasl.h               |   4 +-
 ui/vnc.c                         |  11 +-
 util/Makefile.objs               |   4 +-
 util/acl.c                       | 188 -----------------------
 util/authz-simple.c              | 314 ++++++++++++++++++++++++++++++++++++++
 util/authz.c                     |  47 ++++++
 util/qemu-option.c               |  27 ++--
 37 files changed, 2189 insertions(+), 419 deletions(-)
 delete mode 100644 include/qemu/acl.h
 create mode 100644 include/qemu/authz-simple.h
 create mode 100644 include/qemu/authz.h
 create mode 100644 qapi/util.json
 create mode 100644 tests/test-authz-simple.c
 delete mode 100644 util/acl.c
 create mode 100644 util/authz-simple.c
 create mode 100644 util/authz.c
Signature · 1 line
2.7.4
#1 lore raw

PATCH v7 1/7 qdict: implement a qdict_crumple method for un-flattening a dict

The qdict_flatten() method will take a dict whose elements are further nested dicts/lists and flatten them by concatenating keys.

The qdict_crumple() method aims to do the reverse, taking a flat qdict, and turning it into a set of nested dicts/lists. It will apply nesting based on the key name, with a '.' indicating a new level in the hierarchy. If the keys in the nested structure are all numeric, it will create a list, otherwise it will create a dict.

If the keys are a mixture of numeric and non-numeric, or the numeric keys are not in strictly ascending order, an error will be reported.

As an example, a flat dict containing

{
'foo.0.bar': 'one',
'foo.0.wizz': '1',
'foo.1.bar': 'two',
'foo.1.wizz': '2'
}

will get turned into a dict with one element 'foo' whose value is a list. The list elements will each in turn be dicts.

{
'foo': [

     { 'bar': 'one', 'wizz': '1' },
     { 'bar': 'two', 'wizz': '2' }

],
}

If the key is intended to contain a literal '.', then it must be escaped as '..'. ie a flat dict

  {
     'foo..bar': 'wizz',
     'bar.foo..bar': 'eek',
     'bar.hello': 'world'
  }

Will end up as

  {
     'foo.bar': 'wizz',
     'bar': {
        'foo.bar': 'eek',
        'hello': 'world'
     }
  }

The intent of this function is that it allows a set of QemuOpts to be turned into a nested data structure that mirrors the nesting used when the same object is defined over QMP.

---
 include/qapi/qmp/qdict.h |   1 +
 qobject/qdict.c          | 283 +++++++++++++++++++++++++++++++++++++++++++++++
 tests/check-qdict.c      | 241 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 525 insertions(+)
include/qapi/qmp/qdict.h +1 -0
index 71b8eb0..8a3ac13 100644
@@ -73,6 +73,7 @@ void qdict_flatten(QDict *qdict);
 void qdict_extract_subqdict(QDict *src, QDict **dst, const char *start);
 void qdict_array_split(QDict *src, QList **dst);
 int qdict_array_entries(QDict *src, const char *subqdict);
+QObject *qdict_crumple(QDict *src, bool recursive, Error **errp);
 
 void qdict_join(QDict *dest, QDict *src, bool overwrite);
 
qobject/qdict.c +283 -0

295 lines not on this page · raw message

tests/check-qdict.c +241 -0

259 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

PATCH v7 2/7 option: make parse_option_bool/number non-static

In reply to Daniel P. Berrange

The opts-visitor.c opts_type_bool() method has code for parsing a string to set a bool value, as does the qemu-option.c parse_option_bool() method, except it handles fewer cases.

To enable consistency across the codebase, extend parse_option_bool() to handle "yes", "no", "y" and "n", and make it non-static. Convert the opts visitor to call this method directly.

Also make parse_option_number() non-static to allow for similar reuse later.

---
 include/qemu/option.h |  4 ++++
 qapi/opts-visitor.c   | 19 +------------------
 util/qemu-option.c    | 27 ++++++++++++++++-----------
 3 files changed, 21 insertions(+), 29 deletions(-)
include/qemu/option.h +4 -0
index 8542d2d..c37d8e9 100644
@@ -37,6 +37,10 @@ int get_param_value(char *buf, int buf_size,
                     const char *tag, const char *str);
 
 
+void parse_option_bool(const char *name, const char *value, bool *ret,
+                       Error **errp);
+void parse_option_number(const char *name, const char *value,
+                         uint64_t *ret, Error **errp);
 void parse_option_size(const char *name, const char *value,
                        uint64_t *ret, Error **errp);
 bool has_help_option(const char *param);
qapi/opts-visitor.c +1 -18
index 4cf1cf8..b3757ca 100644
@@ -334,7 +334,6 @@ opts_type_str(Visitor *v, const char *name, char **obj, Error **errp)
 }
 
 
-/* mimics qemu-option.c::parse_option_bool() */
 static void
 opts_type_bool(Visitor *v, const char *name, bool *obj, Error **errp)
 {
@@ -346,23 +345,7 @@ opts_type_bool(Visitor *v, const char *name, bool *obj, Error **errp)
         return;
     }
 
-    if (opt->str) {
-        if (strcmp(opt->str, "on") == 0 ||
-            strcmp(opt->str, "yes") == 0 ||
-            strcmp(opt->str, "y") == 0) {
-            *obj = true;
-        } else if (strcmp(opt->str, "off") == 0 ||
-            strcmp(opt->str, "no") == 0 ||
-            strcmp(opt->str, "n") == 0) {
-            *obj = false;
-        } else {
-            error_setg(errp, QERR_INVALID_PARAMETER_VALUE, opt->name,
-                       "on|yes|y|off|no|n");
-            return;
-        }
-    } else {
-        *obj = true;
-    }
+    parse_option_bool(opt->name, opt->str, obj, errp);
 
     processed(ov, name);
 }
util/qemu-option.c +16 -11
index 3467dc2..6fc9ccb 100644
@@ -125,25 +125,30 @@ int get_param_value(char *buf, int buf_size,
     return get_next_param_value(buf, buf_size, tag, &str);
 }
 
-static void parse_option_bool(const char *name, const char *value, bool *ret,
-                              Error **errp)
+void parse_option_bool(const char *name, const char *value, bool *ret,
+                       Error **errp)
 {
     if (value != NULL) {
-        if (!strcmp(value, "on")) {
-            *ret = 1;
-        } else if (!strcmp(value, "off")) {
-            *ret = 0;
+        if (strcmp(value, "on") == 0 ||
+            strcmp(value, "yes") == 0 ||
+            strcmp(value, "y") == 0) {
+            *ret = true;
+        } else if (strcmp(value, "off") == 0 ||
+            strcmp(value, "no") == 0 ||
+            strcmp(value, "n") == 0) {
+            *ret = false;
         } else {
-            error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
-                       name, "'on' or 'off'");
+            error_setg(errp, QERR_INVALID_PARAMETER_VALUE, name,
+                       "on|yes|y|off|no|n");
+            return;
         }
     } else {
-        *ret = 1;
+        *ret = true;
     }
 }
 
-static void parse_option_number(const char *name, const char *value,
-                                uint64_t *ret, Error **errp)
+void parse_option_number(const char *name, const char *value,
+                         uint64_t *ret, Error **errp)
 {
     char *postfix;
     uint64_t number;
Signature · 1 line
2.7.4
#4 lore raw

PATCH v7 3/7 qapi: add a QmpInputVisitor that does string conversion

In reply to Daniel P. Berrange

Currently the QmpInputVisitor assumes that all scalar values are directly represented as their final types. ie it assumes an 'int' is using QInt, and a 'bool' is using QBool.

This adds an alternative constructor for QmpInputVisitor that will set it up such that it expects a QString for all scalar types instead.

This makes it possible to use QmpInputVisitor with a QDict produced from QemuOpts, where everything is in string format.

---
 include/qapi/qmp-input-visitor.h |  42 +++++++++--
 qapi/qmp-input-visitor.c         | 105 +++++++++++++++++++++++++++
 tests/test-qmp-input-visitor.c   | 149 ++++++++++++++++++++++++++++++++++++++-
 3 files changed, 289 insertions(+), 7 deletions(-)
include/qapi/qmp-input-visitor.h +38 -4
index b0624d8..ed09a90 100644
@@ -19,14 +19,48 @@
 
 typedef struct QmpInputVisitor QmpInputVisitor;
 
-/*
- * Return a new input visitor that converts QMP to QAPI.
+/**
+ * qmp_input_visitor_new:
+ * @obj: the input object to visit
+ * @strict: whether to require that all input keys are consumed
+ *
+ * Create a new input visitor that converts QMP to QAPI.
+ *
+ * Any scalar values in the @obj input data structure should be in the
+ * required type already. ie if visiting a bool, the value should
+ * already be a QBool instance.
  *
- * Set @strict to reject a parse that doesn't consume all keys of a
- * dictionary; otherwise excess input is ignored.
+ * If @strict is set to true, then an error will be reported if any
+ * dict keys are not consumed during visitation.
+ *
+ * The returned input visitor should be released by calling
+ * qmp_input_visitor_cleanup when no longer required.
+ *
+ * Returns: a new input visitor
  */
 QmpInputVisitor *qmp_input_visitor_new(QObject *obj, bool strict);
 
+/**
+ * qmp_string_input_visitor_new:
+ * @obj: the input object to visit
+ * @strict: whether to require that all input keys are consumed
+ *
+ * Create a new input visitor that converts QMP to QAPI.
+ *
+ * Any scalar values in the @obj input data structure should always be
+ * represented as strings. ie if visiting a boolean, the value should
+ * be a QString whose contents represent a valid boolean.
+ *
+ * If @strict is set to true, then an error will be reported if any
+ * dict keys are not consumed during visitation.
+ *
+ * The returned input visitor should be released by calling
+ * qmp_input_visitor_cleanup when no longer required.
+ *
+ * Returns: a new input visitor
+ */
+QmpInputVisitor *qmp_string_input_visitor_new(QObject *obj, bool strict);
+
 void qmp_input_visitor_cleanup(QmpInputVisitor *v);
 
 Visitor *qmp_input_get_visitor(QmpInputVisitor *v);
qapi/qmp-input-visitor.c +105 -0

144 lines not on this page · raw message

tests/test-qmp-input-visitor.c +146 -3

207 lines not on this page · raw message

Signature · 1 line
2.7.4
#6 lore raw

PATCH v7 4/7 qom: support arbitrary non-scalar properties with -object

In reply to Daniel P. Berrange

The current -object command line syntax only allows for creation of objects with scalar properties, or a list with a fixed scalar element type. Objects which have properties that are represented as structs in the QAPI schema cannot be created using -object.

This is a design limitation of the way the OptsVisitor is written. It simply iterates over the QemuOpts values as a flat list. The support for lists is enabled by allowing the same key to be repeated in the opts string.

It is not practical to extend the OptsVisitor to support more complex data structures while also maintaining the existing list handling behaviour that is relied upon by other areas of QEMU.

Fortunately there is no existing object that implements the UserCreatable interface that relies on the list handling behaviour, so it is possible to swap out the OptsVisitor for a different visitor implementation, so -object supports non-scalar properties, thus leaving other users of OptsVisitor unaffected.

The previously added qdict_crumple() method is able to take a qdict containing a flat set of properties and turn that into a arbitrarily nested set of dicts and lists. By combining qemu_opts_to_qdict and qdict_crumple() together, we can turn the opt string into a data structure that is practically identical to that passed over QMP when defining an object. The only difference is that all the scalar values are represented as strings, rather than strings, ints and bools. This is sufficient to let us replace the OptsVisitor with the QMPInputVisitor for use with -object.

Thus -object can now support non-scalar properties, for example the QMP object

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "demo",
      "id": "demo0",
      "parameters": {
        "foo": [
          { "bar": "one", "wizz": "1" },
          { "bar": "two", "wizz": "2" }
        ]
      }
    }
  }

Would be creatable via the CLI now using

    $QEMU \
      -object demo,id=demo0,\
              foo.0.bar=one,foo.0.wizz=1,\
              foo.1.bar=two,foo.1.wizz=2

Notice that this syntax is intentionally compatible with that currently used by block drivers.

This is also wired up to work for the 'object_add' command in the HMP monitor with the same syntax.

  (hmp) object_add demo,id=demo0,\
                   foo.0.bar=one,foo.0.wizz=1,\
                   foo.1.bar=two,foo.1.wizz=2

NB indentation should not be used with HMP commands, this is just for convenient formatting in this commit message.

---
 hmp.c                           |  18 +--
 include/qom/object_interfaces.h |  10 +-
 qmp.c                           |   2 +-
 qom/object_interfaces.c         |  49 ++++--
 tests/check-qom-proplist.c      | 319 +++++++++++++++++++++++++++++++++++++++-
 5 files changed, 365 insertions(+), 33 deletions(-)
hmp.c +5 -13
index 925601a..5603aaf 100644
@@ -25,7 +25,7 @@
 #include "qemu/sockets.h"
 #include "monitor/monitor.h"
 #include "monitor/qdev.h"
-#include "qapi/opts-visitor.h"
+#include "qapi/qmp-input-visitor.h"
 #include "qapi/qmp/qerror.h"
 #include "qapi/string-output-visitor.h"
 #include "qapi/util.h"
@@ -1721,20 +1721,12 @@ void hmp_netdev_del(Monitor *mon, const QDict *qdict)
 void hmp_object_add(Monitor *mon, const QDict *qdict)
 {
     Error *err = NULL;
-    QemuOpts *opts;
-    OptsVisitor *ov;
+    QmpInputVisitor *qiv;
     Object *obj = NULL;
 
-    opts = qemu_opts_from_qdict(qemu_find_opts("object"), qdict, &err);
-    if (err) {
-        hmp_handle_error(mon, &err);
-        return;
-    }
-
-    ov = opts_visitor_new(opts);
-    obj = user_creatable_add(qdict, opts_get_visitor(ov), &err);
-    opts_visitor_cleanup(ov);
-    qemu_opts_del(opts);
+    qiv = qmp_string_input_visitor_new((QObject *)qdict, true);
+    obj = user_creatable_add(qdict, qmp_input_get_visitor(qiv), &err);
+    qmp_input_visitor_cleanup(qiv);
 
     if (err) {
         hmp_handle_error(mon, &err);
include/qom/object_interfaces.h +8 -2
index 8b17f4d..2466e53 100644
@@ -96,18 +96,24 @@ Object *user_creatable_add(const QDict *qdict,
  * user_creatable_add_type:
  * @type: the object type name
  * @id: the unique ID for the object
+ * @nested: whether to recurse into the visitor for properties
  * @qdict: the object properties
  * @v: the visitor
  * @errp: if an error occurs, a pointer to an area to store the error
  *
  * Create an instance of the user creatable object @type, placing
  * it in the object composition tree with name @id, initializing
- * it with properties from @qdict
+ * it with properties from @qdict.
+ *
+ * If the visitor is already positioned to read the properties
+ * in @qdict, @nested should be false. Conversely, if it is
+ * necessary to open/close a struct to read the properties in
+ * @qdict, @nested should be true.
  *
  * Returns: the newly created object or NULL on error
  */
 Object *user_creatable_add_type(const char *type, const char *id,
-                                const QDict *qdict,
+                                bool nested, const QDict *qdict,
                                 Visitor *v, Error **errp);
 
 /**
qmp.c +1 -1
index 7df6543..fc33661 100644
@@ -667,7 +667,7 @@ void qmp_object_add(const char *type, const char *id,
     }
 
     qiv = qmp_input_visitor_new(props, true);
-    obj = user_creatable_add_type(type, id, pdict,
+    obj = user_creatable_add_type(type, id, true, pdict,
                                   qmp_input_get_visitor(qiv), errp);
     qmp_input_visitor_cleanup(qiv);
     if (obj) {
qom/object_interfaces.c +33 -16

94 lines not on this page · raw message

tests/check-qom-proplist.c +318 -1

411 lines not on this page · raw message

Signature · 1 line
2.7.4
#8 lore raw

PATCH v7 5/7 util: add QAuthZ object as an authorization base class

In reply to Daniel P. Berrange

The current qemu_acl module provides a simple access control list facility inside QEMU, which is used via a set of monitor commands acl_show, acl_policy, acl_add, acl_remove & acl_reset.

Note there is no ability to create ACLs - the network services (eg VNC server) were expected to create ACLs that they want to check.

There is also no way to define ACLs on the command line, nor potentially integrate with external authorization systems like polkit, pam, ldap lookup, etc.

The QAuthZ object defines a minimal abstract QOM class that can be subclassed for creating different authorization providers.

---
 MAINTAINERS          |  7 +++++
 Makefile             |  1 +
 Makefile.objs        |  2 ++
 Makefile.target      |  2 ++
 include/qemu/authz.h | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 util/Makefile.objs   |  2 ++
 util/authz.c         | 47 +++++++++++++++++++++++++++
 7 files changed, 150 insertions(+)
 create mode 100644 include/qemu/authz.h
 create mode 100644 util/authz.c
MAINTAINERS +7 -0
index 2ab6e3b..2a339e9 100644
@@ -1325,6 +1325,13 @@ F: include/qemu/throttle.h
 F: util/throttle.c
 L: [email protected]
 
+Authorization
+M: Daniel P. Berrange <[email protected]>
+S: Maintained
+F: util/authz*
+F: include/qemu/authz*
+F: tests/test-authz-*
+
 Usermode Emulation
 ------------------
 Overall
Makefile +1 -0
index 7087fc2..02d8f0a 100644
@@ -148,6 +148,7 @@ endif
 dummy := $(call unnest-vars,, \
                 stub-obj-y \
                 util-obj-y \
+                util-qom-obj-y \
                 qga-obj-y \
                 ivshmem-client-obj-y \
                 ivshmem-server-obj-y \
Makefile.objs +2 -0
index 7f1f0a3..1d7bad7 100644
@@ -4,6 +4,8 @@ stub-obj-y = stubs/ crypto/
 util-obj-y = util/ qobject/ qapi/
 util-obj-y += qmp-introspect.o qapi-types.o qapi-visit.o qapi-event.o
 
+util-qom-obj-y += util/
+
 #######################################################################
 # block-obj-y is code used by both qemu system emulation and qemu-img
 
Makefile.target +2 -0
index d720b3e..d38c33d 100644
@@ -176,6 +176,7 @@ include $(SRC_PATH)/Makefile.objs
 dummy := $(call unnest-vars,,target-obj-y)
 target-obj-y-save := $(target-obj-y)
 dummy := $(call unnest-vars,.., \
+               util-qom-obj-y \
                block-obj-y \
                block-obj-m \
                crypto-obj-y \
@@ -188,6 +189,7 @@ target-obj-y := $(target-obj-y-save)
 all-obj-y += $(common-obj-y)
 all-obj-y += $(target-obj-y)
 all-obj-y += $(qom-obj-y)
+all-obj-y += $(util-qom-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
 all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
 all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
include/qemu/authz.h new file +89 -0

89 lines not on this page · raw message

util/Makefile.objs +2 -0
index 45f8794..0d83583 100644
@@ -34,3 +34,5 @@ util-obj-y += base64.o
 util-obj-y += log.o
 util-obj-y += qdist.o
 util-obj-y += qht.o
+
+util-qom-obj-y += authz.o
util/authz.c new file +47 -0

47 lines not on this page · raw message

Signature · 1 line
2.7.4
#9 lore raw

PATCH v7 6/7 util: add QAuthZSimple object type for a simple access control list

In reply to Daniel P. Berrange

Add a QAuthZSimple object type that implements the QAuthZ interface. This simple built-in implementation maintains a trivial access control list with a sequence of match rules and a final default policy. This replicates the functionality currently provided by the qemu_acl module.

To create an instance of this object via the QMP monitor, the syntax used would be

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-simple",
      "id": "auth0",
      "parameters": {
        "rules": [
           { "match": "fred", "policy": "allow", "format": "exact" },
           { "match": "bob", "policy": "allow", "format": "exact" },
           { "match": "danb", "policy": "deny", "format": "glob" },
           { "match": "dan*", "policy": "allow", "format": "exact" },
        ],
        "policy": "deny"
      }
    }
  }

Or via the -object command line

  $QEMU \
     -object authz-simple,id=acl0,policy=deny,\
             rules.0.match=fred,rules.0.policy=allow,rules.0.format=exact,\
             rules.1.match=bob,rules.1.policy=allow,rules.1.format=exact,\
             rules.2.match=danb,rules.2.policy=deny,rules.2.format=glob,\
             rules.3.match=dan\*,rules.3.policy=allow,rules.3.format=exact

This sets up an authorization rule that allows 'fred', 'bob' and anyone whose name starts with 'dan', except for 'danb'. Everyone unmatched is denied.

---
 Makefile                    |   2 +-
 include/qemu/authz-simple.h | 115 ++++++++++++++++
 qapi-schema.json            |   6 +-
 qapi/util.json              |  47 +++++++
 tests/.gitignore            |   1 +
 tests/Makefile.include      |   3 +
 tests/test-authz-simple.c   | 172 ++++++++++++++++++++++++
 util/Makefile.objs          |   1 +
 util/authz-simple.c         | 314 ++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 659 insertions(+), 2 deletions(-)
 create mode 100644 include/qemu/authz-simple.h
 create mode 100644 qapi/util.json
 create mode 100644 tests/test-authz-simple.c
 create mode 100644 util/authz-simple.c
Makefile +1 -1
index 02d8f0a..2a9b464 100644
@@ -292,7 +292,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \
                $(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
                $(SRC_PATH)/qapi/event.json $(SRC_PATH)/qapi/introspect.json \
                $(SRC_PATH)/qapi/crypto.json $(SRC_PATH)/qapi/rocker.json \
-               $(SRC_PATH)/qapi/trace.json
+               $(SRC_PATH)/qapi/trace.json $(SRC_PATH)/qapi/util.json
 
 qapi-types.c qapi-types.h :\
 $(qapi-modules) $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
include/qemu/authz-simple.h new file +115 -0

115 lines not on this page · raw message

qapi-schema.json +5 -1
index ba3bf14..7705903 100644
@@ -5,6 +5,9 @@
 # QAPI common definitions
 { 'include': 'qapi/common.json' }
 
+# QAPI util definitions
+{ 'include': 'qapi/util.json' }
+
 # QAPI crypto definitions
 { 'include': 'qapi/crypto.json' }
 
@@ -3736,7 +3739,8 @@
 # Since 2.5
 ##
 { 'struct': 'DummyForceArrays',
-  'data': { 'unused': ['X86CPUFeatureWordInfo'] } }
+  'data': { 'unused1': ['X86CPUFeatureWordInfo'],
+            'unused2': ['QAuthZSimpleRule'] } }
 
 
 ##
qapi/util.json new file +47 -0

47 lines not on this page · raw message

tests/.gitignore +1 -0
index 840ea39..d90d738 100644
@@ -10,6 +10,7 @@ check-qom-proplist
 qht-bench
 rcutorture
 test-aio
+test-authz-simple
 test-base64
 test-bitops
 test-blockjob-txn
tests/Makefile.include +3 -0
index 6c09962..5021394 100644
@@ -109,6 +109,7 @@ check-unit-y += tests/test-crypto-xts$(EXESUF)
 check-unit-y += tests/test-crypto-block$(EXESUF)
 gcov-files-test-logging-y = tests/test-logging.c
 check-unit-y += tests/test-logging$(EXESUF)
+check-unit-y += tests/test-authz-simple$(EXESUF)
 
 check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
 
@@ -466,6 +467,8 @@ tests/test-timed-average$(EXESUF): tests/test-timed-average.o qemu-timer.o \
 	$(test-util-obj-y)
 tests/test-base64$(EXESUF): tests/test-base64.o \
 	libqemuutil.a libqemustub.a
+tests/test-authz-simple$(EXESUF): tests/test-authz-simple.o \
+	libqemuutil.a libqemustub.a $(util-qom-obj-y) $(qom-obj-y)
 
 tests/test-logging$(EXESUF): tests/test-logging.o $(test-util-obj-y)
 
tests/test-authz-simple.c new file +172 -0

172 lines not on this page · raw message

util/Makefile.objs +1 -0
index 0d83583..c0f89de 100644
@@ -36,3 +36,4 @@ util-obj-y += qdist.o
 util-obj-y += qht.o
 
 util-qom-obj-y += authz.o
+util-qom-obj-y += authz-simple.o
util/authz-simple.c new file +314 -0

314 lines not on this page · raw message

Signature · 1 line
2.7.4
#10 lore raw

PATCH v7 7/7 acl: delete existing ACL implementation

In reply to Daniel P. Berrange

The 'qemu_acl' type was a previous non-QOM based attempt to provide an authorization facility in QEMU. Because it is non-QOM based it cannot be created via the command line and requires special monitor commands to manipulate it.

The new QAuthZ and QAuthZSimple QOM classes provide a superset of the functionality in qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor commands are converted to use the new QAuthZSimple data type instead in order to provide backwards compatibility, but their use is discouraged.

---
 Makefile                       |   6 +-
 crypto/tlssession.c            |  28 ++++--
 include/qemu/acl.h             |  74 ----------------
 monitor.c                      | 181 ++++++++++++++++++++++++++-------------
 tests/Makefile.include         |   2 +-
 tests/test-crypto-tlssession.c |  15 ++--
 tests/test-io-channel-tls.c    |  16 ++--
 ui/vnc-auth-sasl.c             |   2 +-
 ui/vnc-auth-sasl.h             |   4 +-
 ui/vnc.c                       |  11 ++-
 util/Makefile.objs             |   1 -
 util/acl.c                     | 188 -----------------------------------------
 12 files changed, 180 insertions(+), 348 deletions(-)
 delete mode 100644 include/qemu/acl.h
 delete mode 100644 util/acl.c
Makefile +3 -3
index 2a9b464..59071ea 100644
@@ -253,9 +253,9 @@ util/module.o-cflags = -D'CONFIG_BLOCK_MODULES=$(block-modules)'
 
 qemu-img.o: qemu-img-cmds.h
 
-qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
-qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
-qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) libqemuutil.a libqemustub.a
+qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(util-qom-obj-y) libqemuutil.a libqemustub.a
+qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(util-qom-obj-y) libqemuutil.a libqemustub.a
+qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(util-qom-obj-y) libqemuutil.a libqemustub.a
 
 qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o libqemuutil.a libqemustub.a
 
crypto/tlssession.c +23 -5
index a543e5a..78bb0f5 100644
@@ -23,7 +23,7 @@
 #include "crypto/tlscredsanon.h"
 #include "crypto/tlscredsx509.h"
 #include "qapi/error.h"
-#include "qemu/acl.h"
+#include "qemu/authz.h"
 #include "trace.h"
 
 #ifdef CONFIG_GNUTLS
@@ -208,6 +208,7 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
     unsigned int nCerts, i;
     time_t now;
     gnutls_x509_crt_t cert = NULL;
+    Error *err = NULL;
 
     now = time(NULL);
     if (now == ((time_t)-1)) {
@@ -296,16 +297,33 @@ qcrypto_tls_session_check_certificate(QCryptoTLSSession *session,
                 goto error;
             }
             if (session->aclname) {
-                qemu_acl *acl = qemu_acl_find(session->aclname);
-                int allow;
-                if (!acl) {
+                QAuthZ *acl;
+                Object *obj;
+                Object *container;
+                bool allow;
+
+                container = object_get_objects_root();
+                obj = object_resolve_path_component(container,
+                                                    session->aclname);
+                if (!obj) {
                     error_setg(errp, "Cannot find ACL %s",
                                session->aclname);
                     goto error;
                 }
 
-                allow = qemu_acl_party_is_allowed(acl, session->peername);
+                if (!object_dynamic_cast(obj, TYPE_QAUTHZ)) {
+                    error_setg(errp, "Object '%s' is not a QAuthZ subclass",
+                               session->aclname);
+                    goto error;
+                }
 
+                acl = QAUTHZ(obj);
+
+                allow = qauthz_is_allowed(acl, session->peername, &err);
+                if (err) {
+                    error_propagate(errp, err);
+                    goto error;
+                }
                 if (!allow) {
                     error_setg(errp, "TLS x509 ACL check for %s is denied",
                                session->peername);
include/qemu/acl.h deleted +0 -74

74 lines not on this page · raw message

monitor.c +121 -60

240 lines not on this page · raw message

tests/Makefile.include +1 -1
index 5021394..ee7833a 100644
@@ -421,7 +421,7 @@ test-qom-obj-y = $(qom-obj-y) $(test-util-obj-y)
 test-qapi-obj-y = tests/test-qapi-visit.o tests/test-qapi-types.o \
 	tests/test-qapi-event.o tests/test-qmp-introspect.o \
 	$(test-qom-obj-y)
-test-crypto-obj-y = $(crypto-obj-y) $(test-qom-obj-y)
+test-crypto-obj-y = $(crypto-obj-y) $(util-qom-obj-y) $(test-qom-obj-y)
 test-io-obj-y = $(io-obj-y) $(test-crypto-obj-y)
 test-block-obj-y = $(block-obj-y) $(test-io-obj-y)
 
tests/test-crypto-tlssession.c +10 -5
index 1a4a066..b7463e7 100644
@@ -26,7 +26,7 @@
 #include "qom/object_interfaces.h"
 #include "qapi/error.h"
 #include "qemu/sockets.h"
-#include "qemu/acl.h"
+#include "qemu/authz-simple.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
 
@@ -111,7 +111,7 @@ static void test_crypto_tls_session(const void *opaque)
     QCryptoTLSCreds *serverCreds;
     QCryptoTLSSession *clientSess = NULL;
     QCryptoTLSSession *serverSess = NULL;
-    qemu_acl *acl;
+    QAuthZSimple *auth;
     const char * const *wildcards;
     int channel[2];
     bool clientShake = false;
@@ -170,11 +170,15 @@ static void test_crypto_tls_session(const void *opaque)
         &err);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("tlssessionacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_simple_new("tlssessionacl",
+                             QAUTHZ_SIMPLE_POLICY_DENY,
+                             &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_simple_append_rule(auth, *wildcards,
+                                  QAUTHZ_SIMPLE_POLICY_ALLOW,
+                                  QAUTHZ_SIMPLE_FORMAT_GLOB,
+                                  &error_abort);
         wildcards++;
     }
 
@@ -264,6 +268,7 @@ static void test_crypto_tls_session(const void *opaque)
 
     object_unparent(OBJECT(serverCreds));
     object_unparent(OBJECT(clientCreds));
+    object_unparent(OBJECT(auth));
 
     qcrypto_tls_session_free(serverSess);
     qcrypto_tls_session_free(clientSess);
tests/test-io-channel-tls.c +11 -5
index 3c361a7..ff472a0 100644
@@ -28,7 +28,7 @@
 #include "io/channel-socket.h"
 #include "io-channel-helpers.h"
 #include "crypto/tlscredsx509.h"
-#include "qemu/acl.h"
+#include "qemu/authz-simple.h"
 #include "qom/object_interfaces.h"
 
 #ifdef QCRYPTO_HAVE_TLS_TEST_SUPPORT
@@ -115,7 +115,7 @@ static void test_io_channel_tls(const void *opaque)
     QIOChannelTLS *serverChanTLS;
     QIOChannelSocket *clientChanSock;
     QIOChannelSocket *serverChanSock;
-    qemu_acl *acl;
+    QAuthZSimple *auth;
     const char * const *wildcards;
     int channel[2];
     struct QIOChannelTLSHandshakeData clientHandshake = { false, false };
@@ -166,11 +166,15 @@ static void test_io_channel_tls(const void *opaque)
         &err);
     g_assert(serverCreds != NULL);
 
-    acl = qemu_acl_init("channeltlsacl");
-    qemu_acl_reset(acl);
+    auth = qauthz_simple_new("channeltlsacl",
+                             QAUTHZ_SIMPLE_POLICY_DENY,
+                             &error_abort);
     wildcards = data->wildcards;
     while (wildcards && *wildcards) {
-        qemu_acl_append(acl, 0, *wildcards);
+        qauthz_simple_append_rule(auth, *wildcards,
+                                  QAUTHZ_SIMPLE_POLICY_ALLOW,
+                                  QAUTHZ_SIMPLE_FORMAT_GLOB,
+                                  &error_abort);
         wildcards++;
     }
 
@@ -256,6 +260,8 @@ static void test_io_channel_tls(const void *opaque)
     object_unref(OBJECT(serverChanSock));
     object_unref(OBJECT(clientChanSock));
 
+    object_unparent(OBJECT(auth));
+
     close(channel[0]);
     close(channel[1]);
 }
ui/vnc-auth-sasl.c +1 -1
index 5ae29c1..b1064a7 100644
@@ -150,7 +150,7 @@ static int vnc_auth_sasl_check_access(VncState *vs)
         return 0;
     }
 
-    allow = qemu_acl_party_is_allowed(vs->vd->sasl.acl, vs->sasl.username);
+    allow = qauthz_is_allowed(vs->vd->sasl.acl, vs->sasl.username, NULL);
 
     VNC_DEBUG("SASL client %s %s by ACL\n", vs->sasl.username,
               allow ? "allowed" : "denied");
ui/vnc-auth-sasl.h +2 -2
index 3f59da6..a6ffb7e 100644
@@ -32,7 +32,7 @@
 typedef struct VncStateSASL VncStateSASL;
 typedef struct VncDisplaySASL VncDisplaySASL;
 
-#include "qemu/acl.h"
+#include "qemu/authz.h"
 #include "qemu/main-loop.h"
 
 struct VncStateSASL {
@@ -61,7 +61,7 @@ struct VncStateSASL {
 };
 
 struct VncDisplaySASL {
-    qemu_acl *acl;
+    QAuthZ *acl;
 };
 
 void vnc_sasl_client_cleanup(VncState *vs);
ui/vnc.c +8 -3
index 95e4db7..0356769 100644
@@ -33,7 +33,7 @@
 #include "qemu/error-report.h"
 #include "qemu/sockets.h"
 #include "qemu/timer.h"
-#include "qemu/acl.h"
+#include "qemu/authz-simple.h"
 #include "qemu/config-file.h"
 #include "qapi/qmp/qerror.h"
 #include "qapi/qmp/types.h"
@@ -3742,7 +3742,9 @@ void vnc_display_open(const char *id, Error **errp)
         } else {
             vs->tlsaclname = g_strdup_printf("vnc.%s.x509dname", vs->id);
         }
-        qemu_acl_init(vs->tlsaclname);
+        qauthz_simple_new(vs->tlsaclname,
+                          QAUTHZ_SIMPLE_POLICY_DENY,
+                          &error_abort);
     }
 #ifdef CONFIG_VNC_SASL
     if (acl && sasl) {
@@ -3753,7 +3755,10 @@ void vnc_display_open(const char *id, Error **errp)
         } else {
             aclname = g_strdup_printf("vnc.%s.username", vs->id);
         }
-        vs->sasl.acl = qemu_acl_init(aclname);
+        vs->sasl.acl =
+            QAUTHZ(qauthz_simple_new(aclname,
+                                     QAUTHZ_SIMPLE_POLICY_DENY,
+                                     &error_abort));
         g_free(aclname);
     }
 #endif
util/Makefile.objs +0 -1
index c0f89de..3ce0092 100644
@@ -13,7 +13,6 @@ util-obj-y += envlist.o path.o module.o
 util-obj-$(call lnot,$(CONFIG_INT128)) += host-utils.o
 util-obj-y += bitmap.o bitops.o hbitmap.o
 util-obj-y += fifo8.o
-util-obj-y += acl.o
 util-obj-y += error.o qemu-error.o
 util-obj-y += id.o
 util-obj-y += iov.o qemu-config.o qemu-sockets.o uri.o notify.o
util/acl.c deleted +0 -188

188 lines not on this page · raw message

Signature · 1 line
2.7.4
Reviewed-by on v7 2/7
#3 lore raw

Re: [Qemu-devel] [PATCH v7 2/7] option: make parse_option_bool/number non-static

In reply to Daniel P. Berrange
Quoted 13 lines · Daniel P. Berrange

The opts-visitor.c opts_type_bool() method has code for parsing a string to set a bool value, as does the qemu-option.c parse_option_bool() method, except it handles fewer cases.

To enable consistency across the codebase, extend parse_option_bool() to handle "yes", "no", "y" and "n", and make it non-static. Convert the opts visitor to call this method directly.

Also make parse_option_number() non-static to allow for similar reuse later.

Quoted 8 lines
---
 include/qemu/option.h |  4 ++++
 qapi/opts-visitor.c   | 19 +------------------
 util/qemu-option.c    | 27 ++++++++++++++++-----------
 3 files changed, 21 insertions(+), 29 deletions(-)

I'm going to include this in my proposed fallback patches on my qapi subset F series, where we may need to "fix" netdev_add to care about back-compat parsing of a string where an integer is expected.

Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org
#5 lore raw

Re: [Qemu-devel] [PATCH v7 3/7] qapi: add a QmpInputVisitor that does string conversion

In reply to Daniel P. Berrange
Quoted 5 lines · Daniel P. Berrange

Currently the QmpInputVisitor assumes that all scalar values are directly represented as their final types. ie it assumes an 'int' is using QInt, and a 'bool' is using QBool.

Quoted 7 lines

This adds an alternative constructor for QmpInputVisitor that will set it up such that it expects a QString for all scalar types instead.

This makes it possible to use QmpInputVisitor with a QDict produced from QemuOpts, where everything is in string format.

This is almost what I need for my netdev_add fallback on my qapi subset F series, except that I want to have a hybrid mode that accepts BOTH native type and string. I'll take this patch and tweak it for my series, and we can compare the difference.

Quoted 4 lines

---

Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org
#7 lore raw

Re: [Qemu-devel] [PATCH v7 4/7] qom: support arbitrary non-scalar properties with -object

In reply to Daniel P. Berrange
Quoted 24 lines · Daniel P. Berrange

The current -object command line syntax only allows for creation of objects with scalar properties, or a list with a fixed scalar element type. Objects which have properties that are represented as structs in the QAPI schema cannot be created using -object.

Thus -object can now support non-scalar properties, for example the QMP object

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "demo",
      "id": "demo0",
      "parameters": {
        "foo": [
          { "bar": "one", "wizz": "1" },
          { "bar": "two", "wizz": "2" }
        ]
      }
    }
  }
Quoted 6 lines

Would be creatable via the CLI now using

    $QEMU \
      -object demo,id=demo0,\
              foo.0.bar=one,foo.0.wizz=1,\
              foo.1.bar=two,foo.1.wizz=2

Overall, I like it.

Quoted 3 lines

Notice that this syntax is intentionally compatible with that currently used by block drivers.

And this gives me hope that someday we may replace blockdev-add from QemuOpts munging to direct QAPI type handling. Maybe :) But certainly not for 2.7.

hmp.c void hmp_netdev_del(Monitor *mon, const QDict *qdict) · line 1724

Quoted 7 lines
hmp.c +1 -2
@@ -1721,20 +1721,12 @@ void hmp_netdev_del(Monitor *mon, const QDict *qdict)
 void hmp_object_add(Monitor *mon, const QDict *qdict)
 {
     Error *err = NULL;
-    QemuOpts *opts;
-    OptsVisitor *ov;
+    QmpInputVisitor *qiv;

Will need rebasing now that some of my qapi cleanups have landed in master, and also depending on whether my adoption of your patch 3/7 in my 'qapi subset F' series also lands first, since I tweaked your string input visitor interface slightly. But the idea is right on track.

hmp.c void hmp_netdev_del(Monitor *mon, const QDict *qdict) · line 1727

Quoted 13 lines
hmp.c +1 -10
     Object *obj = NULL;
 
-    opts = qemu_opts_from_qdict(qemu_find_opts("object"), qdict, &err);
-    if (err) {
-        hmp_handle_error(mon, &err);
-        return;
-    }
-
-    ov = opts_visitor_new(opts);
-    obj = user_creatable_add(qdict, opts_get_visitor(ov), &err);
-    opts_visitor_cleanup(ov);
-    qemu_opts_del(opts);
+    qiv = qmp_string_input_visitor_new((QObject *)qdict, true);

While this cast happens to work (because QDict currently has QObject as its first member), it is not necessarily safe to future layout changes, and you should probably be using QOBJECT(qdict) instead.

hmp.c void hmp_netdev_del(Monitor *mon, const QDict *qdict) · line 1729

Quoted 2 lines
hmp.c +2 -0
+    obj = user_creatable_add(qdict, qmp_input_get_visitor(qiv), &err);
+    qmp_input_visitor_cleanup(qiv);

That looks so much simpler, even if it does need rebasing!

Signature · 2 lines
Eric Blake   eblake redhat com    +1-919-301-3266
Libvirt virtualization library http://libvirt.org