Skip to contentSkip to conversation

Patch "regulator: qcom_smd: add regulator ops for pm8941 lnldo" has been added to the 4.6-stable tree

PATCH [email protected] 1 participant 1 message Jul 12, 2016

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

regulator: qcom_smd: add regulator ops for pm8941 lnldo

to the 4.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
regulator-qcom_smd-add-regulator-ops-for-pm8941-lnldo.patch
and it can be found in the queue-4.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From d1e44b6b2823f1751ffe7e7589f545f05cfe2095 Mon Sep 17 00:00:00 2001

From: Srinivas Kandagatla <[email protected]>
Date: Fri, 3 Jun 2016 12:23:09 +0100
Subject: regulator: qcom_smd: add regulator ops for pm8941 lnldo

From: Srinivas Kandagatla <[email protected]>

commit d1e44b6b2823f1751ffe7e7589f545f05cfe2095 upstream.

After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range.
This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback.

---
 drivers/regulator/qcom_smd-regulator.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/regulator/qcom_smd-regulator.c +12 -1
@@ -148,6 +148,17 @@ static const struct regulator_ops rpm_sm
 	.set_load = rpm_reg_set_load,
 };
 
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+	.enable = rpm_reg_enable,
+	.disable = rpm_reg_disable,
+	.is_enabled = rpm_reg_is_enabled,
+
+	.get_voltage = rpm_reg_get_voltage,
+	.set_voltage = rpm_reg_set_voltage,
+
+	.set_load = rpm_reg_set_load,
+};
+
 static const struct regulator_ops rpm_switch_ops = {
 	.enable = rpm_reg_enable,
 	.disable = rpm_reg_disable,
@@ -248,7 +259,7 @@ static const struct regulator_desc pm894
 static const struct regulator_desc pm8941_lnldo = {
 	.fixed_uV = 1740000,
 	.n_voltages = 1,
-	.ops = &rpm_smps_ldo_ops,
+	.ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {

Patches currently in stable-queue which might be from [email protected] are

queue-4.6/regulator-qcom_smd-add-regulator-ops-for-pm8941-lnldo.patch queue-4.6/regulator-qcom_smd-add-list_voltage-callback.patch