The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure.

Signed-off-by Michal Suchanek <[email protected]>

Acked-by Maxime Ripard <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/spi/spi-sun4i.c |   10 +++++++++-
 drivers/spi/spi-sun6i.c |   10 +++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)

drivers/spi/spi-sun4i.c +9 -1

@@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct
 {
 	struct sun4i_spi *sspi = spi_master_get_devdata(master);
 	unsigned int mclk_rate, div, timeout;
+	unsigned int start, end, tx_time;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;

@@ -279,9 +280,16 @@ static int sun4i_spi_transfer_one(struct
 	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
 	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
 
+	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+	start = jiffies;
 	timeout = wait_for_completion_timeout(&sspi->done,
-					      msecs_to_jiffies(1000));
+					      msecs_to_jiffies(tx_time));
+	end = jiffies;
 	if (!timeout) {
+		dev_warn(&master->dev,
+			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+			 jiffies_to_msecs(end - start), tx_time);
 		ret = -ETIMEDOUT;
 		goto out;
 	}

drivers/spi/spi-sun6i.c +9 -1

@@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct
 {
 	struct sun6i_spi *sspi = spi_master_get_devdata(master);
 	unsigned int mclk_rate, div, timeout;
+	unsigned int start, end, tx_time;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;

@@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct
 	reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 	sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
 
+	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+	start = jiffies;
 	timeout = wait_for_completion_timeout(&sspi->done,
-					      msecs_to_jiffies(1000));
+					      msecs_to_jiffies(tx_time));
+	end = jiffies;
 	if (!timeout) {
+		dev_warn(&master->dev,
+			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+			 jiffies_to_msecs(end - start), tx_time);
 		ret = -ETIMEDOUT;
 		goto out;
 	}

Patches currently in stable-queue which might be from [email protected] are

queue-4.6/spi-sun4i-fix-fifo-limit.patch
queue-4.6/spi-sunxi-fix-transfer-timeout.patch