Patch "ARM: tegra: fix erroneous address in dts" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

ARM: tegra: fix erroneous address in dts

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
arm-tegra-fix-erroneous-address-in-dts.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Ralf Ramsauer <[email protected]>
Date: Mon, 18 Jul 2016 11:46:48 +0200
Subject: ARM: tegra: fix erroneous address in dts

From: Ralf Ramsauer <[email protected]>

commit b5c86b7496d74f6e454bcab5166efa023e1f0459 upstream.

c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge quirk, wrong addresses were introduced. Fix it and use the correct addresses.

Thierry let me know, that there is another patch (b5896f67ab3c in linux-next) in preparation which removes all the '0,' prefixes of unit addresses on Tegra124 and is planned to go upstream in 4.8, so this patch will get reverted then.

But for the moment, this patch is necessary to fix current misbehaviour.

---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1386,7 +1386,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

@@ -1398,7 +1398,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/arm-tegra-fix-erroneous-address-in-dts.patch