regulator: bindings: Use the correct symbol for second

PATCH New Fabio Estevam 1 participant 1 message Aug 19, 2016

Subsystems (2)

Device tree bindings Voltage and current regulator framework

lore

Share & tools

lore

Fabio Estevam

author

2016-08-19 03:01 UTC #0 lore raw

PATCH 1/1 regulator: bindings: Use the correct symbol for second

From: Fabio Estevam <[email protected]>

The symbol for second is in lower case.

Signed-off-by Fabio Estevam <[email protected]>

---
 Documentation/devicetree/bindings/regulator/regulator.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Documentation/devicetree/bindings/regulator/regulator.txt +1 -1

index ecfc593..6ab5aef 100644
@@ -13,7 +13,7 @@ Optional properties:
 - regulator-allow-bypass: allow the regulator to go into bypass mode
 - regulator-allow-set-load: allow the regulator performance level to be configured
 - <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-ramp-delay: ramp delay for regulator(in uV/us)
   For hardware which supports disabling ramp rate, it should be explicitly
   initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
 - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply

Signature · 1 line

2.7.4