Skip to contentSkip to conversation

USB: serial: usb-serial-simple: add support for another Infineon flashloader

PATCH In review Daniele Palmas 2 participants 3 messages Sep 2, 2016 – Sep 12, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover USB: serial: usb-serial-simple: add support for another Infineon flashloader

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit flashing application.

Following lsusb output for the composition:

Bus 004 Device 020: ID 8087:0801 Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00

  bDeviceClass            2 Communications
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x8087 Intel Corp.
  idProduct          0x0801 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 44
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 124mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000006
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x000d
Self Powered
U1 Enabled
U2 Enabled

Daniele Palmas (1):
USB: serial: usb-serial-simple: add support for another Infineon
flashloader

 drivers/usb/serial/usb-serial-simple.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 USB: serial: usb-serial-simple: add support for another Infineon flashloader

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit flashing application.

---
 drivers/usb/serial/usb-serial-simple.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/serial/usb-serial-simple.c +2 -1
index a204782..e98b6e5 100644
@@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS);
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
 	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
-	{ USB_DEVICE(0x8087, 0x0716) }
+	{ USB_DEVICE(0x8087, 0x0716) }, \
+	{ USB_DEVICE(0x8087, 0x0801) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
 /* Google Serial USB SubClass */
Signature · 1 line
2.7.4
maintainer
#2 lore raw
Quoted 6 lines · Daniele Palmas

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit flashing application.

Now applied, thanks.

Johan