Patch "usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices" has been added to the 4.4-stable tree

@@ -50,6 +50,7 @@ static const char *const speed_names[] =
 	[USB_SPEED_HIGH] = "high-speed",
 	[USB_SPEED_WIRELESS] = "wireless",
 	[USB_SPEED_SUPER] = "super-speed",
+	[USB_SPEED_SUPER_PLUS] = "super-speed-plus",
 };
 
 const char *usb_speed_string(enum usb_device_speed speed)

@@ -191,6 +191,7 @@ static int usb_parse_endpoint(struct dev
 	if (usb_endpoint_xfer_int(d)) {
 		i = 1;
 		switch (to_usb_device(ddev)->speed) {
+		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			/* Many device manufacturers are using full-speed

@@ -274,7 +275,7 @@ static int usb_parse_endpoint(struct dev
 	}
 
 	/* Parse a possible SuperSpeed endpoint companion descriptor */
-	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER)
+	if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER)
 		usb_parse_ss_endpoint_companion(ddev, cfgno,
 				inum, asnum, endpoint, buffer, size);
 

@@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descripto
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		type = "Int.";
-		if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
+		if (speed == USB_SPEED_HIGH || speed >= USB_SPEED_SUPER)
 			interval = 1 << (desc->bInterval - 1);
 		else
 			interval = desc->bInterval;

@@ -230,7 +230,7 @@ static char *usb_dump_endpoint_descripto
 		return start;
 	}
 	interval *= (speed == USB_SPEED_HIGH ||
-		     speed == USB_SPEED_SUPER) ? 125 : 1000;
+		     speed >= USB_SPEED_SUPER) ? 125 : 1000;
 	if (interval % 1000)
 		unit = 'u';
 	else {

@@ -322,7 +322,7 @@ static char *usb_dump_config_descriptor(
 
 	if (start > end)
 		return start;
-	if (speed == USB_SPEED_SUPER)
+	if (speed >= USB_SPEED_SUPER)
 		mul = 8;
 	else
 		mul = 2;

@@ -534,6 +534,8 @@ static ssize_t usb_device_dump(char __us
 		speed = "480"; break;
 	case USB_SPEED_SUPER:
 		speed = "5000"; break;
+	case USB_SPEED_SUPER_PLUS:
+		speed = "10000"; break;
 	default:
 		speed = "??";
 	}

@@ -553,7 +555,7 @@ static ssize_t usb_device_dump(char __us
 
 		/* super/high speed reserves 80%, full/low reserves 90% */
 		if (usbdev->speed == USB_SPEED_HIGH ||
-		    usbdev->speed == USB_SPEED_SUPER)
+		    usbdev->speed >= USB_SPEED_SUPER)
 			max = 800;
 		else
 			max = FRAME_TIME_MAX_USECS_ALLOC;

@@ -206,7 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *de
 	 * The xHCI driver has its own irq management
 	 * make sure irq setup is not touched for xhci in generic hcd code
 	 */
-	if ((driver->flags & HCD_MASK) != HCD_USB3) {
+	if ((driver->flags & HCD_MASK) < HCD_USB3) {
 		if (!dev->irq) {
 			dev_err(&dev->dev,
 			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",

@@ -1078,7 +1078,7 @@ static int register_root_hub(struct usb_
 		retval = usb_get_bos_descriptor(usb_dev);
 		if (!retval) {
 			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
-		} else if (usb_dev->speed == USB_SPEED_SUPER) {
+		} else if (usb_dev->speed >= USB_SPEED_SUPER) {
 			mutex_unlock(&usb_bus_list_lock);
 			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
 					dev_name(&usb_dev->dev), retval);

@@ -2112,7 +2112,7 @@ int usb_alloc_streams(struct usb_interfa
 	hcd = bus_to_hcd(dev->bus);
 	if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
 		return -EINVAL;
-	if (dev->speed != USB_SPEED_SUPER)
+	if (dev->speed < USB_SPEED_SUPER)
 		return -EINVAL;
 	if (dev->state < USB_STATE_CONFIGURED)
 		return -ENODEV;

@@ -2160,7 +2160,7 @@ int usb_free_streams(struct usb_interfac
 
 	dev = interface_to_usbdev(interface);
 	hcd = bus_to_hcd(dev->bus);
-	if (dev->speed != USB_SPEED_SUPER)
+	if (dev->speed < USB_SPEED_SUPER)
 		return -EINVAL;
 
 	/* Double-free is not allowed */

@@ -298,7 +298,7 @@ static void usb_set_lpm_parameters(struc
 	unsigned int hub_u1_del;
 	unsigned int hub_u2_del;
 
-	if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER)
+	if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER)
 		return;
 
 	hub = usb_hub_to_struct_hub(udev->parent);

@@ -2645,7 +2645,7 @@ static unsigned hub_is_wusb(struct usb_h
  */
 static bool use_new_scheme(struct usb_device *udev, int retry)
 {
-	if (udev->speed == USB_SPEED_SUPER)
+	if (udev->speed >= USB_SPEED_SUPER)
 		return false;
 
 	return USE_NEW_SCHEME(retry);

@@ -3985,7 +3985,7 @@ int usb_disable_lpm(struct usb_device *u
 	struct usb_hcd *hcd;
 
 	if (!udev || !udev->parent ||
-			udev->speed != USB_SPEED_SUPER ||
+			udev->speed < USB_SPEED_SUPER ||
 			!udev->lpm_capable ||
 			udev->state < USB_STATE_DEFAULT)
 		return 0;

@@ -4042,7 +4042,7 @@ void usb_enable_lpm(struct usb_device *u
 	struct usb_hcd *hcd;
 
 	if (!udev || !udev->parent ||
-			udev->speed != USB_SPEED_SUPER ||
+			udev->speed < USB_SPEED_SUPER ||
 			!udev->lpm_capable ||
 			udev->state < USB_STATE_DEFAULT)
 		return;

@@ -4308,7 +4308,9 @@ hub_port_init(struct usb_hub *hub, struc
 
 	retval = -ENODEV;
 
-	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
+	/* Don't allow speed changes at reset, except usb 3.0 to faster */
+	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed &&
+	    !(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) {
 		dev_dbg(&udev->dev, "device reset changed speed!\n");
 		goto fail;
 	}

@@ -4320,6 +4322,7 @@ hub_port_init(struct usb_hub *hub, struc
 	 * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
 	 */
 	switch (udev->speed) {
+	case USB_SPEED_SUPER_PLUS:
 	case USB_SPEED_SUPER:
 	case USB_SPEED_WIRELESS:	/* fixed at 512 */
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);

@@ -4346,7 +4349,7 @@ hub_port_init(struct usb_hub *hub, struc
 	else
 		speed = usb_speed_string(udev->speed);
 
-	if (udev->speed != USB_SPEED_SUPER)
+	if (udev->speed < USB_SPEED_SUPER)
 		dev_info(&udev->dev,
 				"%s %s USB device number %d using %s\n",
 				(udev->config) ? "reset" : "new", speed,

@@ -4476,11 +4479,12 @@ hub_port_init(struct usb_hub *hub, struc
 							devnum, retval);
 				goto fail;
 			}
-			if (udev->speed == USB_SPEED_SUPER) {
+			if (udev->speed >= USB_SPEED_SUPER) {
 				devnum = udev->devnum;
 				dev_info(&udev->dev,
-						"%s SuperSpeed USB device number %d using %s\n",
+						"%s SuperSpeed%s USB device number %d using %s\n",
 						(udev->config) ? "reset" : "new",
+					 (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "",
 						devnum, udev->bus->controller->driver->name);
 			}
 

@@ -4519,7 +4523,7 @@ hub_port_init(struct usb_hub *hub, struc
 	 * got from those devices show they aren't superspeed devices. Warm
 	 * reset the port attached by the devices can fix them.
 	 */
-	if ((udev->speed == USB_SPEED_SUPER) &&
+	if ((udev->speed >= USB_SPEED_SUPER) &&
 			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
 		dev_err(&udev->dev, "got a wrong device descriptor, "
 				"warm reset device\n");

@@ -4530,7 +4534,7 @@ hub_port_init(struct usb_hub *hub, struc
 	}
 
 	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
-			udev->speed == USB_SPEED_SUPER)
+			udev->speed >= USB_SPEED_SUPER)
 		i = 512;
 	else
 		i = udev->descriptor.bMaxPacketSize0;

@@ -4740,7 +4744,7 @@ static void hub_port_connect(struct usb_
 		udev->level = hdev->level + 1;
 		udev->wusb = hub_is_wusb(hub);
 
-		/* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+		/* Devices connected to SuperSpeed hubs are USB 3.0 or later */
 		if (hub_is_superspeed(hub->hdev))
 			udev->speed = USB_SPEED_SUPER;
 		else

@@ -401,7 +401,7 @@ int usb_submit_urb(struct urb *urb, gfp_
 		/* SuperSpeed isoc endpoints have up to 16 bursts of up to
 		 * 3 packets each
 		 */
-		if (dev->speed == USB_SPEED_SUPER) {
+		if (dev->speed >= USB_SPEED_SUPER) {
 			int     burst = 1 + ep->ss_ep_comp.bMaxBurst;
 			int     mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
 			max *= burst;

@@ -499,6 +499,7 @@ int usb_submit_urb(struct urb *urb, gfp_
 		}
 		/* too big? */
 		switch (dev->speed) {
+		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:	/* units are 125us */
 			/* Handle up to 2^(16-1) microframes */
 			if (urb->interval > (1 << 15))

@@ -45,7 +45,7 @@ static inline unsigned usb_get_max_power
 		struct usb_host_config *c)
 {
 	/* SuperSpeed power is in 8 mA units; others are in 2 mA units */
-	unsigned mul = (udev->speed == USB_SPEED_SUPER ? 8 : 2);
+	unsigned mul = (udev->speed >= USB_SPEED_SUPER ? 8 : 2);
 
 	return c->desc.bMaxPower * mul;
 }

@@ -954,6 +954,7 @@ enum usb_device_speed {
 	USB_SPEED_HIGH,				/* usb 2.0 */
 	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
 	USB_SPEED_SUPER,			/* usb 3.0 */
+	USB_SPEED_SUPER_PLUS,			/* usb 3.1 */
 };