Patch "usb: renesas_usbhs: Use dmac only if the pipe type is bulk" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

usb: renesas_usbhs: Use dmac only if the pipe type is bulk

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-renesas_usbhs-use-dmac-only-if-the-pipe-type-is-bulk.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Yoshihiro Shimoda <[email protected]>
Date: Mon, 8 Aug 2016 21:50:53 +0900
Subject: usb: renesas_usbhs: Use dmac only if the pipe type is bulk

From: Yoshihiro Shimoda <[email protected]>

commit 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d upstream.

This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high.

---
 drivers/usb/renesas_usbhs/fifo.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -871,7 +871,7 @@ static int usbhsf_dma_prepare_push(struc
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((len < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_push;
 
 	/* check data length if this driver don't use USB-DMAC */

@@ -976,7 +976,7 @@ static int usbhsf_dma_prepare_pop_with_u
 
 	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
 	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
-	    usbhs_pipe_is_dcp(pipe))
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		goto usbhsf_pio_prepare_pop;
 
 	fifo = usbhsf_get_dma_fifo(priv, pkt);

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/usb-renesas_usbhs-fix-receiving-data-corrupt-on-r-car-gen3-with-dmac.patch queue-4.7/usb-renesas_usbhs-clear-the-brdysts-in-usbhsg_ep_enable.patch queue-4.7/usb-renesas_usbhs-use-dmac-only-if-the-pipe-type-is-bulk.patch queue-4.7/clk-renesas-r8a7795-fix-sd-clocks.patch