Patch "USB: serial: option: add WeTelecom WM-D200" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

USB: serial: option: add WeTelecom WM-D200

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-serial-option-add-wetelecom-wm-d200.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Aleksandr Makarov <[email protected]>
Date: Sat, 20 Aug 2016 13:29:41 +0300
Subject: USB: serial: option: add WeTelecom WM-D200

From: Aleksandr Makarov <[email protected]>

commit 6695593e4a7659db49ac6eca98c164f7b5589f72 upstream.

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -525,6 +525,10 @@ static void option_instat_callback(struc
 #define VIATELECOM_VENDOR_ID			0x15eb
 #define VIATELECOM_PRODUCT_CDS7			0x0001
 
+/* WeTelecom products */
+#define WETELECOM_VENDOR_ID			0x22de
+#define WETELECOM_PRODUCT_WMD200		0x6801
+
 struct option_blacklist_info {
 	/* bitmask of interface numbers blacklisted for send_setup */
 	const unsigned long sendsetup;

@@ -1991,6 +1995,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },                /* OLICARD300 - MT6225 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
 	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/usb-serial-option-add-wetelecom-0x6802-and-0x6803-products.patch queue-4.7/usb-serial-option-add-wetelecom-wm-d200.patch