Patch "regulator: anatop: allow regulator to be in bypass mode" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

regulator: anatop: allow regulator to be in bypass mode

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
regulator-anatop-allow-regulator-to-be-in-bypass-mode.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: =?UTF-8?q?Mika=20B=C3=A5tsman?= <[email protected]>
Date: Fri, 17 Jun 2016 13:31:37 +0300
Subject: regulator: anatop: allow regulator to be in bypass mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Mika Båtsman <[email protected]>

commit 8a092e682f20f193f2070dba2ea1904e95814126 upstream.

Bypass support was added in commit d38018f2019c ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board.

anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22

---
 drivers/regulator/anatop-regulator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/regulator-anatop-allow-regulator-to-be-in-bypass-mode.patch