clocksource/fsl: Fix errata A-007728 for flextimer
PATCH v3 1/1 clocksource/fsl: Fix errata A-007728 for flextimer
If the FTM counter reaches the FTM_MOD value between the reading of the TOF bit and the writing of 0 to the TOF bit, the process of clearing the TOF bit does not work as expected when FTMx_CONF[NUMTOF] != 0 and the current TOF count is less than FTMx_CONF[NUMTOF]. If the above condition is met, the TOF bit remains set. If the TOF interrupt is enabled (FTMx_SC[TOIE] = 1), the TOF interrupt also remains asserted.
Above is the errata discription
The workaround is clearing TOF bit until it is cleaned(FTM counter doesn't always reache the FTM_MOD anyway),which may cost some cycles.
Signed-off-by Meng Yi <[email protected]>
---
Change from V1:
-add timeout into wile loop using a counter
--- drivers/clocksource/fsl_ftm_timer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/clocksource/fsl_ftm_timer.c +4 -4
@@ -83,11 +83,11 @@ static inline void ftm_counter_disable(void __iomem *base)static inline void ftm_irq_acknowledge (void __iomem *base) { -u32 val; +u32 count =100 ; - val =ftm_readl (base +FTM_SC ); - val &= ~FTM_SC_TOF ; -ftm_writel (val, base +FTM_SC ); +while ((FTM_SC_TOF &ftm_readl (base +FTM_SC )) && count--) +ftm_writel (ftm_readl (base +FTM_SC ) & (~FTM_SC_TOF ), + base +FTM_SC ); }static inline void ftm_irq_enable (void __iomem *base)
Signature · 1 line
2.1.0.27.g96db324