Patch "usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-gadget-udc-renesas-usb3-clear-vbout-bit-in-drd_con.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Yoshihiro Shimoda <[email protected]>
Date: Tue, 23 Aug 2016 21:11:13 +0900
Subject: usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON

From: Yoshihiro Shimoda <[email protected]>

commit b2f1eaaee564c5593c303f4d15d827924cb6d20d upstream.

This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability.

Renesas USB3.0 peripheral controller")

---
 drivers/usb/gadget/udc/renesas_usb3.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -106,6 +106,7 @@
 
 /* DRD_CON */
 #define DRD_CON_PERI_CON	BIT(24)
+#define DRD_CON_VBOUT		BIT(0)
 
 /* USB_INT_ENA_1 and USB_INT_STA_1 */
 #define USB_INT_1_B3_PLLWKUP	BIT(31)

@@ -363,6 +364,7 @@ static void usb3_init_epc_registers(stru
 {
 	/* FIXME: How to change host / peripheral mode as well? */
 	usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+	usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
 
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
 	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/usb-gadget-udc-renesas-usb3-clear-vbout-bit-in-drd_con.patch queue-4.7/usb-renesas_usbhs-fix-clearing-the-brdy-bemp-sts-condition.patch