m68k: add Sysam AMCORE open board support
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): CAMuHMdXpEp=2NZM7b7RqYZszO3Tq-Am1ZVqe8XbfB4=j1rqNsw@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Angeo,
Quoted 7 lines · Angelo Dureghello
Quoted 6 lines · Geert Uytterhoeven
Quoted 3 lines · Angelo Dureghello
Add support for Sysam AMCORE board, an open hardware embedded Linux board, see http://sysam.it/openzone/projects/amcore/amcore.html for any info.
Quoted 8 lines
Quoted 3 lines
Just entered mainlne, already 404 :-(
Is http://sysam.it/cff_amcore.html the new (and future) URL?
thanks for the info :)
yes, that's the board, i reorganized a bit the site, but i just set now a Redirect rule, so old link now works as well.
Thanks for resurrecting the link!
Quoted 10 lines
About the board, i mainly
- fixed coldfire big endian <-> dm9000 little endian (hw bus bytes swap),
- reduced the size,
- powering now from micro USB,
- set SDRAM and FLASH in the other side, to reduce size,
- also used magnetics inside ethernet rj45 connector.Features are the same of amcore 1.00.
The board works really fine until now.
Cool!
I really enjoyed your presentation at ELCE. Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 32 lines · Geert Uytterhoeven
Hi Angeo,
Quoted 7 lines · Angelo Dureghello
Quoted 6 lines · Geert Uytterhoeven
Quoted 3 lines · Angelo Dureghello
Add support for Sysam AMCORE board, an open hardware embedded Linux board, see http://sysam.it/openzone/projects/amcore/amcore.html for any info.
Quoted 8 lines
Quoted 3 lines
Just entered mainlne, already 404 :-(
Is http://sysam.it/cff_amcore.html the new (and future) URL?
thanks for the info :)
yes, that's the board, i reorganized a bit the site, but i just set now a Redirect rule, so old link now works as well.
Thanks for resurrecting the link!
Quoted 10 lines
About the board, i mainly
- fixed coldfire big endian <-> dm9000 little endian (hw bus bytes swap),
- reduced the size,
- powering now from micro USB,
- set SDRAM and FLASH in the other side, to reduce size,
- also used magnetics inside ethernet rj45 connector.Features are the same of amcore 1.00.
The board works really fine until now.
Quoted 7 lines
Cool!
I really enjoyed your presentation at ELCE. Thanks!
Gr{oetje,eeting}s,
Geert
many thanks, really, i hope there will be chances to meet us again.
I am working now on a "stmark2" board, mcf54415 based, quite all BGA. In first prototype soldered here (infrared) BDM works fine, i can debug some initial code from SRAM in a very responsive way. Unfortunately for now i am stuck with P&E / CodeWarrior tools, but will look for a better open way once things works.
Best regards,
Angelo Dureghello
Quoted 12 lines
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Angelo,
Quoted 1 line · Angelo Dureghello
many thanks, really, i hope there will be chances to meet us again.
Will you be at FOSDEM?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 4 lines · Geert Uytterhoeven
Quoted 1 line · Angelo Dureghello
many thanks, really, i hope there will be chances to meet us again.
Will you be at FOSDEM?
I'm planning to come. Let's do some m68k hacking. I would like to get the installed packages count to over 10.000 and fix debian-installer on m68k to create new installer images. We also need to get EMILE back in.
Adrian
Signature · 4 lines
.''`. John Paul Adrian Glaubitz : :' : Debian Developer - [email protected] `. `' Freie Universitaet Berlin - [email protected] `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Hi Adrian,
Quoted 10 lines · John Paul Adrian Glaubitz
Quoted 4 lines · Geert Uytterhoeven
Quoted 1 line · Angelo Dureghello
many thanks, really, i hope there will be chances to meet us again.
Will you be at FOSDEM?
I'm planning to come. Let's do some m68k hacking. I would like to get the installed packages count to over 10.000 and fix debian-installer on m68k to create new installer images. We also need to get EMILE back in.
Once i'll have my mcf54415 based board up and running i should be able to contribute to debian as i can. I'll let you know.
Quoted 3 lines
Adrian
Regards,
Angelo Dureghello
Hi Geert,
Quoted 6 lines · Geert Uytterhoeven
Hi Angelo,
Quoted 1 line · Angelo Dureghello
many thanks, really, i hope there will be chances to meet us again.
Will you be at FOSDEM?
well for me is a bit hard to come due to family things, but who knows, the fact there are no attendee costs and reservations to do keeps the chance open for me.
Regards,
Angelo Dureghello
Quoted 12 lines
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds