Patch "regulator: qcom_smd: Fix voltage ranges for pm8x41" has been added to the 4.7-stable tree

This is a note to let you know that I've just added the patch titled

regulator: qcom_smd: Fix voltage ranges for pm8x41

to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
regulator-qcom_smd-fix-voltage-ranges-for-pm8x41.patch
and it can be found in the queue-4.7 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Stephen Boyd <[email protected]>
Date: Mon, 11 Jul 2016 14:50:07 -0700
Subject: regulator: qcom_smd: Fix voltage ranges for pm8x41

From: Stephen Boyd <[email protected]>

commit 290284776bb281759b11faa287b8abccaf74bfcb upstream.

The voltage ranges listed here are wrong. The correct ranges can be seen in the "native" spmi regulator driver qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and boost_ranges[] for the pldo, ftsmps, and boost type regulators. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on pldos.

Doing this allows us to specify a voltage like 3075000 for l24, whereas before that wasn't a supported voltage.

---
 drivers/regulator/qcom_smd-regulator.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

@@ -221,29 +221,30 @@ static const struct regulator_desc pm8x4
 static const struct regulator_desc pm8841_ftsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE(350000,  0, 184, 5000),
-		REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000),
+		REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000),
 	},
 	.n_linear_ranges = 2,
-	.n_voltages = 340,
+	.n_voltages = 262,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_boost = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000),
+		REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
 	},
 	.n_linear_ranges = 1,
-	.n_voltages = 16,
+	.n_voltages = 31,
 	.ops = &rpm_smps_ldo_ops,
 };
 
 static const struct regulator_desc pm8941_pldo = {
 	.linear_ranges = (struct regulator_linear_range[]) {
-		REGULATOR_LINEAR_RANGE( 750000,  0,  30, 25000),
-		REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000),
+		REGULATOR_LINEAR_RANGE( 750000,  0,  63, 12500),
+		REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+		REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
 	},
-	.n_linear_ranges = 2,
-	.n_voltages = 100,
+	.n_linear_ranges = 3,
+	.n_voltages = 164,
 	.ops = &rpm_smps_ldo_ops,
 };
 

Patches currently in stable-queue which might be from [email protected] are

queue-4.7/regulator-qcom_smd-fix-voltage-ranges-for-pm8x41.patch queue-4.7/regulator-qcom_smd-fix-voltage-ranges-for-pma8084-ftsmps-and-pldo.patch