Connection to WPA-PSK/WPA2-PSK networks doesn't work with QCA9733 rev 30
Hi,
It seems that I can't connect to any WPA-PSK/WPA2-PSK network with this network adapter. But unsecured connections without any WPA or WEP works normally.
02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)
--
Markus Mälkönen
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 6 lines · Markus Mälkönen
It seems that I can't connect to any WPA-PSK/WPA2-PSK network with this network adapter. But unsecured connections without any WPA or WEP works normally.
02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)
You are not providing much information so difficult to guess. I haven't heard anyone else mentioning anything like this, are you sure it really is a problem with ath10k?
To understand more what is happening we would need to see how you configure the network, wpasupplicant debug logs and full dmesg output.
Signature · 5 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 14 lines · Kalle
Quoted 7 lines · Markus Mälkönen
It seems that I can't connect to any WPA-PSK/WPA2-PSK network with this network adapter. But unsecured connections without any WPA or
WEP
works normally.02:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)
You are not providing much information so difficult to guess. I haven't heard anyone else mentioning anything like this, are you sure it really is a problem with ath10k?
Quoted 5 lines
To understand more what is happening we would need to see how you configure the network, wpasupplicant debug logs and full dmesg output.
--
Kalle Valo
It seems that only up-to-date router hardware and/or software are supported, not any older router hardware and/or software. Only router where are I have successfully created WPA2-PSK connection on linux with QCA9377 is my Android 5.1.1 (CM12.1) cellphone, but when I testing same with older Android 4.2.2 device, 4-way handshake is always unsuccessfully with current ath10k driver despite correct pre-shared key. Also I can't create WPA-PSK connection to Android 4.2.2 wifi hotpoint. Other wlan chips works correctly, so I think that is ath10k related issue, maybe WPA-PSK/WPA2-PSK support for older router device is not fully implemented to ath10k driver.
wlp2s0: SME: Trying to authenticate with MAC (SSID='AP' freq=2427 MHz)
wlp2s0: Trying to associate with MAC (SSID='AP' freq=2427 MHz)
wlp2s0: Associated with MAC
wlp2s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp2s0: CTRL-EVENT-DISCONNECTED bssid=MAC reason=3 locally_generated=1
wlp2s0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlp2s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="AP" auth_failures=1 duration=10 reason=WRONG_KEY
wlp2s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="AP"
--
Markus Mälkönen
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k