ASoC: stac9766: Remove unused DAI ID defines
PATCH 1/5 ASoC: stac9766: Remove unused DAI ID defines
The DAI ID defines are back from the time when DAIs were referenced by a numerical ID. These days a string is used instead and the defines are unused.
--- sound/soc/codecs/stac9766.h | 4 ---- 1 file changed, 4 deletions(-)
sound/soc/codecs/stac9766.h +0 -4
@@ -10,8 +10,4 @@#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E)#define AC97_STAC_STEREO_MIC 0x78 -/* STAC9766 DAI ID's */ -#define STAC9766_DAI_AC97_ANALOG 0 -#define STAC9766_DAI_AC97_DIGITAL 1 -#endif
Signature · 1 line
2.1.4
PATCH 2/5 ASoC: stac9766: Remove register paging support
The AC'97 standard defines paging support for the register range 0x60-0x6f. Meaning registers in this window are mapped to different physical registers depending on the setting of the page select register (0x24).
The stac9766 implements support for switching between page 0 and page 1 depending on the addressed register. But the driver never accesses any registers from page 1, in addition page 0 is the page selected by default.
Considering the development history it is unlikely that the driver will see any new features that require paging support. Removing the paging support makes transitioning the driver to regmap a bit more straight forward.
The default register value table is update to contain the values from page 0, rather than page 1.
--- sound/soc/codecs/stac9766.c | 16 ++-------------- sound/soc/codecs/stac9766.h | 5 ++--- 2 files changed, 4 insertions(+), 17 deletions(-)
sound/soc/codecs/stac9766.c +2 -14
@@ -47,8 +47,8 @@ static const u16 stac9766_reg[] = {0x0000 ,0x0000 ,0x0003 ,0xffff ,/* 4e */ 0x0000 ,0x0000 ,0x0000 ,0x0000 ,/* 56 */ 0x4000 ,0x0000 ,0x0000 ,0x0000 ,/* 5e */ -0x1201 ,0xFFFF ,0xFFFF ,0x0000 ,/* 66 */ -0x0000 ,0x0000 ,0x0000 ,0x0000 ,/* 6e */ +0x1201 ,0x0000 ,0x0000 ,0x0000 ,/* 66 */ +0x0000 ,0x0000 ,0x0000 ,0x1000 ,/* 6e */ 0x0000 ,0x0000 ,0x0000 ,0x0006 ,/* 76 */ 0x0000, 0x0000, 0x0000, 0x0000, /* 7e */ };
@@ -145,12 +145,6 @@ static int stac9766_ac97_write(struct snd_soc_codec *codec, unsigned int reg,struct snd_ac97 *ac97 =snd_soc_codec_get_drvdata (codec);u16 *cache = codec->reg_cache; -if (reg >AC97_STAC_PAGE0 ) { -stac9766_ac97_write (codec,AC97_INT_PAGING ,0 ); - soc_ac97_ops->write (ac97, reg, val); -stac9766_ac97_write (codec,AC97_INT_PAGING ,1 ); -return 0 ; - }if (reg /2 >=ARRAY_SIZE (stac9766_reg))return -EIO ;
@@ -165,12 +159,6 @@ static unsigned int stac9766_ac97_read(struct snd_soc_codec *codec,struct snd_ac97 *ac97 =snd_soc_codec_get_drvdata (codec);u16 val =0 , *cache = codec->reg_cache; -if (reg >AC97_STAC_PAGE0 ) { -stac9766_ac97_write (codec,AC97_INT_PAGING ,0 ); - val = soc_ac97_ops->read (ac97, reg -AC97_STAC_PAGE0 ); -stac9766_ac97_write (codec,AC97_INT_PAGING ,1 ); -return val; - }if (reg /2 >=ARRAY_SIZE (stac9766_reg))return -EIO ;
sound/soc/codecs/stac9766.h +2 -3
@@ -5,9 +5,8 @@#ifndef _STAC9766_H#define _STAC9766_H -#define AC97_STAC_PAGE0 0x1000 -#define AC97_STAC_DA_CONTROL (AC97_STAC_PAGE0 | 0x6A) -#define AC97_STAC_ANALOG_SPECIAL (AC97_STAC_PAGE0 | 0x6E) +#define AC97_STAC_DA_CONTROL 0x6A +#define AC97_STAC_ANALOG_SPECIAL 0x6E#define AC97_STAC_STEREO_MIC 0x78#endif
Signature · 1 line
2.1.4
PATCH 3/5 ASoC: stac9766: Move register defines to main source file
In reply to Lars-Peter ClausenThe stac9766 driver has a header file that defines 3 register locations. Move these to the main source file since it is not really worth it having a separate file for them. The header file is now empty and can be removed.
--- sound/soc/codecs/stac9766.c | 6 ++++-- sound/soc/codecs/stac9766.h | 12 ------------ sound/soc/fsl/efika-audio-fabric.c | 1 - 3 files changed, 4 insertions(+), 15 deletions(-) delete mode 100644 sound/soc/codecs/stac9766.h
sound/soc/codecs/stac9766.c +4 -2
@@ -26,11 +26,13 @@#include <sound/soc.h> #include <sound/tlv.h> -#include "stac9766.h" -#define STAC9766_VENDOR_ID 0x83847666#define STAC9766_VENDOR_ID_MASK 0xffffffff +#define AC97_STAC_DA_CONTROL 0x6A +#define AC97_STAC_ANALOG_SPECIAL 0x6E +#define AC97_STAC_STEREO_MIC 0x78 +/* * STAC9766 register cache */
sound/soc/codecs/stac9766.h deleted +0 -12
@@ -1,12 +0,0 @@ -/* -* stac9766.h -- STAC9766 Soc Audio driver -*/ - -#ifndef _STAC9766_H -#define _STAC9766_H - -#define AC97_STAC_DA_CONTROL 0x6A -#define AC97_STAC_ANALOG_SPECIAL 0x6E -#define AC97_STAC_STEREO_MIC 0x78 - -#endif
sound/soc/fsl/efika-audio-fabric.c +0 -1
@@ -27,7 +27,6 @@#include "mpc5200_dma.h" #include "mpc5200_psc_ac97.h" -#include "../codecs/stac9766.h" #define DRV_NAME "efika-audio-fabric"
Signature · 1 line
2.1.4
PATCH 4/5 ASoC: stac9766: Convert to regmap
In reply to Lars-Peter ClausenCurrently the stac9766 driver still uses custom snd_soc_codec_driver IO callbacks. This has been deprecated for a while, so convert the stac9766 driver to use regmap for its IO.
--- sound/soc/codecs/stac9766.c | 108 ++++++++++++++++++++++++-------------------- 1 file changed, 59 insertions(+), 49 deletions(-)
sound/soc/codecs/stac9766.c +59 -49
@@ -18,6 +18,7 @@#include <linux/slab.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/regmap.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h>
@@ -33,26 +34,49 @@#define AC97_STAC_ANALOG_SPECIAL 0x6E#define AC97_STAC_STEREO_MIC 0x78 -/* -* STAC9766 register cache -*/ -static const u16 stac9766_reg[] = { -0x6A90 ,0x8000 ,0x8000 ,0x8000 ,/* 6 */ -0x0000 ,0x0000 ,0x8008 ,0x8008 ,/* e */ -0x8808 ,0x8808 ,0x8808 ,0x8808 ,/* 16 */ -0x8808 ,0x0000 ,0x8000 ,0x0000 ,/* 1e */ -0x0000 ,0x0000 ,0x0000 ,0x000f ,/* 26 */ -0x0a05 ,0x0400 ,0xbb80 ,0x0000 ,/* 2e */ -0x0000 ,0xbb80 ,0x0000 ,0x0000 ,/* 36 */ -0x0000 ,0x2000 ,0x0000 ,0x0100 ,/* 3e */ -0x0000 ,0x0000 ,0x0080 ,0x0000 ,/* 46 */ -0x0000 ,0x0000 ,0x0003 ,0xffff ,/* 4e */ -0x0000 ,0x0000 ,0x0000 ,0x0000 ,/* 56 */ -0x4000 ,0x0000 ,0x0000 ,0x0000 ,/* 5e */ -0x1201 ,0x0000 ,0x0000 ,0x0000 ,/* 66 */ -0x0000 ,0x0000 ,0x0000 ,0x1000 ,/* 6e */ -0x0000 ,0x0000 ,0x0000 ,0x0006 ,/* 76 */ -0x0000 ,0x0000 ,0x0000 ,0x0000 ,/* 7e */ +static const struct reg_default stac9766_reg_defaults[] = { + {0x02 ,0x8000 }, + {0x04 ,0x8000 }, + {0x06 ,0x8000 }, + {0x0a ,0x0000 }, + {0x0c ,0x8008 }, + {0x0e ,0x8008 }, + {0x10 ,0x8808 }, + {0x12 ,0x8808 }, + {0x14 ,0x8808 }, + {0x16 ,0x8808 }, + {0x18 ,0x8808 }, + {0x1a ,0x0000 }, + {0x1c ,0x8000 }, + {0x20 ,0x0000 }, + {0x22 ,0x0000 }, + {0x28 ,0x0a05 }, + {0x2c ,0xbb80 }, + {0x32 ,0xbb80 }, + {0x3a ,0x2000 }, + {0x3e ,0x0100 }, + {0x4c ,0x0300 }, + {0x4e ,0xffff }, + {0x50 ,0x0000 }, + {0x52 ,0x0000 }, + {0x54 ,0x0000 }, + {0x6a ,0x0000 }, + {0x6e ,0x1000 }, + {0x72 ,0x0000 }, + {0x78 ,0x0000 }, +}; + +static const struct regmap_config stac9766_regmap_config = { + .reg_bits =16 , + .reg_stride =2 , + .val_bits =16 , + .max_register =0x78 , + .cache_type =REGCACHE_RBTREE , + + .volatile_reg = regmap_ac97_default_volatile, + + .reg_defaults = stac9766_reg_defaults, + .num_reg_defaults =ARRAY_SIZE (stac9766_reg_defaults), };static const char *stac9766_record_mux[] = {"Mic" ,"CD" ,"Video" ,"AUX" ,
@@ -144,34 +168,13 @@ static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = {static int stac9766_ac97_write (struct snd_soc_codec *codec,unsigned int reg,unsigned int val) { -struct snd_ac97 *ac97 =snd_soc_codec_get_drvdata (codec); -u16 *cache = codec->reg_cache; - -if (reg /2 >=ARRAY_SIZE (stac9766_reg)) -return -EIO ; - - soc_ac97_ops->write (ac97, reg, val); - cache[reg /2 ] = val; -return 0 ; +return snd_soc_write (codec, reg, val); }static unsigned int stac9766_ac97_read (struct snd_soc_codec *codec,unsigned int reg) { -struct snd_ac97 *ac97 =snd_soc_codec_get_drvdata (codec); -u16 val =0 , *cache = codec->reg_cache; - -if (reg /2 >=ARRAY_SIZE (stac9766_reg)) -return -EIO ; - -if (reg ==AC97_RESET || reg ==AC97_GPIO_STATUS || - reg ==AC97_INT_PAGING || reg ==AC97_VENDOR_ID1 || - reg ==AC97_VENDOR_ID2 ) { - - val = soc_ac97_ops->read (ac97, reg); -return val; - } -return cache[reg /2 ]; +return snd_soc_read (codec, reg); } static int ac97_analog_prepare(struct snd_pcm_substream *substream,
@@ -290,21 +293,34 @@ static struct snd_soc_dai_driver stac9766_dai[] = {static int stac9766_codec_probe (struct snd_soc_codec *codec) {struct snd_ac97 *ac97; +struct regmap *regmap; +int ret; ac97 =snd_soc_new_ac97_codec (codec,STAC9766_VENDOR_ID ,STAC9766_VENDOR_ID_MASK );if (IS_ERR (ac97))return PTR_ERR (ac97); + regmap =regmap_init_ac97 (ac97, &stac9766_regmap_config); +if (IS_ERR (regmap)) { + ret =PTR_ERR (regmap); + goto err_free_ac97; + } + +snd_soc_codec_init_regmap (codec, regmap);snd_soc_codec_set_drvdata (codec, ac97);return 0 ; +err_free_ac97: +snd_soc_free_ac97_codec (ac97); +return ret; }static int stac9766_codec_remove (struct snd_soc_codec *codec) {struct snd_ac97 *ac97 =snd_soc_codec_get_drvdata (codec); +snd_soc_codec_exit_regmap (codec);snd_soc_free_ac97_codec (ac97);return 0 ; }
@@ -314,17 +330,11 @@ static struct snd_soc_codec_driver soc_codec_dev_stac9766 = { .controls = stac9766_snd_ac97_controls, .num_controls = ARRAY_SIZE(stac9766_snd_ac97_controls), }, - .write = stac9766_ac97_write, - .read = stac9766_ac97_read, .set_bias_level = stac9766_set_bias_level, .suspend_bias_off = true, .probe = stac9766_codec_probe, .remove = stac9766_codec_remove, .resume = stac9766_codec_resume, - .reg_cache_size = ARRAY_SIZE(stac9766_reg), - .reg_word_size = sizeof(u16), - .reg_cache_step = 2, - .reg_cache_default = stac9766_reg, };static int stac9766_probe (struct platform_device *pdev)
Signature · 1 line
2.1.4
PATCH 5/5 ASoC: stac9766: Remove ac97_read/ac97_write wrappers
In reply to Lars-Peter ClausenSince the regmap conversion ac97_read/ac97_write are just simple wrappers around snd_soc_read/snd_soc_write. Use those instead directly and remove the wrappers.
Also use snd_soc_update_bits() where appropriate.
--- sound/soc/codecs/stac9766.c | 40 +++++++++++----------------------------- 1 file changed, 11 insertions(+), 29 deletions(-)
sound/soc/codecs/stac9766.c +11 -29
@@ -165,38 +165,22 @@ static const struct snd_kcontrol_new stac9766_snd_ac97_controls[] = { SOC_ENUM("Pop Bypass Mux", stac9766_popbypass_enum), }; -static int stac9766_ac97_write (struct snd_soc_codec *codec,unsigned int reg, -unsigned int val) -{ -return snd_soc_write (codec, reg, val); -} - -static unsigned int stac9766_ac97_read (struct snd_soc_codec *codec, -unsigned int reg) -{ -return snd_soc_read (codec, reg); -} -static int ac97_analog_prepare (struct snd_pcm_substream *substream,struct snd_soc_dai *dai) {struct snd_soc_codec *codec = dai->codec;struct snd_pcm_runtime *runtime = substream->runtime; -unsigned short reg, vra; - - vra =stac9766_ac97_read (codec,AC97_EXTENDED_STATUS ); +unsigned short reg; - vra |=0x1 ;/* enable variable rate audio */ - vra &= ~0x4 ;/* disable SPDIF output */ - -stac9766_ac97_write (codec,AC97_EXTENDED_STATUS , vra); +/* enable variable rate audio, disable SPDIF output */ +snd_soc_update_bits (codec,AC97_EXTENDED_STATUS ,0x5 ,0x1 );if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ) reg =AC97_PCM_FRONT_DAC_RATE ;else reg =AC97_PCM_LR_ADC_RATE ; -return stac9766_ac97_write (codec, reg, runtime->rate); +return snd_soc_write (codec, reg, runtime->rate); } static int ac97_digital_prepare(struct snd_pcm_substream *substream,
@@ -204,18 +188,16 @@ static int ac97_digital_prepare(struct snd_pcm_substream *substream, {struct snd_soc_codec *codec = dai->codec;struct snd_pcm_runtime *runtime = substream->runtime; -unsigned short reg, vra; - -stac9766_ac97_write (codec,AC97_SPDIF ,0x2002 ); +unsigned short reg; - vra =stac9766_ac97_read (codec,AC97_EXTENDED_STATUS ); - vra |=0x5 ;/* Enable VRA and SPDIF out */ +snd_soc_write (codec,AC97_SPDIF ,0x2002 ); -stac9766_ac97_write (codec,AC97_EXTENDED_STATUS , vra); +/* Enable VRA and SPDIF out */ +snd_soc_update_bits (codec,AC97_EXTENDED_STATUS ,0x5 ,0x5 ); reg =AC97_PCM_FRONT_DAC_RATE ; -return stac9766_ac97_write (codec, reg, runtime->rate); +return snd_soc_write (codec, reg, runtime->rate); } static int stac9766_set_bias_level(struct snd_soc_codec *codec,
@@ -225,11 +207,11 @@ static int stac9766_set_bias_level(struct snd_soc_codec *codec,case SND_SOC_BIAS_ON :/* full On */ case SND_SOC_BIAS_PREPARE :/* partial On */ case SND_SOC_BIAS_STANDBY :/* Off, with power */ -stac9766_ac97_write (codec,AC97_POWERDOWN ,0x0000 ); +snd_soc_write (codec,AC97_POWERDOWN ,0x0000 );break ;case SND_SOC_BIAS_OFF :/* Off, without power */ /* disable everything including AC link */ -stac9766_ac97_write (codec,AC97_POWERDOWN ,0xffff ); +snd_soc_write (codec,AC97_POWERDOWN ,0xffff );break ; }return 0 ;
Signature · 1 line
2.1.4