Skip to contentSkip to conversation

HuC Loading Patches

PATCH In review Anusha Srivatsa 4 participants 22 messages Nov 11, 2016 – Nov 16, 2016

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover HuC Loading Patches

These patches add HuC loading support. The userspace patches that check for a fully loaded HuC firmware and use it can be found at:
https://lists.freedesktop.org/archives/libva/2016-September/004554.html
https://lists.freedesktop.org/archives/libva/2016-September/004555.html

v2: rebased.
v3: rebased. Changed the code following the review comments. Changed mainly include renaming certain functions, correcting comments and changing the yesr in the copyright message. Removed one patch from original series: Add guC status to getparams.
v4: Added the file construction method which the HuC follows. This is on similar lines to that of GuC. Rewrote the BXT HuC loading patch and wrote a new patch for HuC loading on KBL.

Anusha Srivatsa (2):
drm/i915/huc: Add BXT HuC Loading Support
drm/i915/HuC: Add KBL huC loading Support

Peter Antoine (6):
drm/i915/guc: Make the GuC fw loading helper functions general drm/i915/huc: Unified css_header struct for GuC and HuC drm/i915/huc: Add HuC fw loading support drm/i915/huc: Add debugfs for HuC loading status check drm/i915/huc: Support HuC authentication drm/i915/get_params: Add HuC status to getparams

 drivers/gpu/drm/i915/Makefile              |   1 +
 drivers/gpu/drm/i915/i915_debugfs.c        |  43 +++-
 drivers/gpu/drm/i915/i915_drv.c            |   8 +
 drivers/gpu/drm/i915/i915_drv.h            |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h        |   3 +
 drivers/gpu/drm/i915/i915_guc_submission.c |  67 ++++++-
 drivers/gpu/drm/i915/intel_guc.h           |  50 +++--
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  22 ++-
 drivers/gpu/drm/i915/intel_guc_loader.c    | 197 +++++++++---------
 drivers/gpu/drm/i915/intel_huc.h           |  43 ++++
 drivers/gpu/drm/i915/intel_huc_loader.c    | 308 +++++++++++++++++++++++++++++
 include/uapi/drm/i915_drm.h                |   1 +
 12 files changed, 624 insertions(+), 122 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v4 1/8 drm/i915/guc: Make the GuC fw loading helper functions general

From: Peter Antoine <[email protected]>

Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well.
s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/UC_FIRMWARE/g

Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose.

v2: rebased on top of nightly.
reapplied the search/replace as upstream code as changed.
v3: rebased again on drm-nightly.
v4: removed G from messages in shared fw fetch function.
v5: rebased.
v7: rebased.
v8: rebased.
v9: rebased.
v10: rebased.

---
 drivers/gpu/drm/i915/i915_debugfs.c        |  12 +--
 drivers/gpu/drm/i915/i915_guc_submission.c |   4 +-
 drivers/gpu/drm/i915/intel_guc.h           |  39 ++++----
 drivers/gpu/drm/i915/intel_guc_loader.c    | 156 ++++++++++++++---------------
 4 files changed, 106 insertions(+), 105 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +6 -6
index b681d42..7e206dd 100644
@@ -2353,7 +2353,7 @@ static int i915_llc(struct seq_file *m, void *data)
 static int i915_guc_load_status_info(struct seq_file *m, void *data)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw;
 	u32 tmp, i;
 
 	if (!HAS_GUC_UCODE(dev_priv))
@@ -2361,15 +2361,15 @@ static int i915_guc_load_status_info(struct seq_file *m, void *data)
 
 	seq_printf(m, "GuC firmware status:\n");
 	seq_printf(m, "\tpath: %s\n",
-		guc_fw->guc_fw_path);
+		guc_fw->uc_fw_path);
 	seq_printf(m, "\tfetch: %s\n",
-		intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));
+		intel_uc_fw_status_repr(guc_fw->fetch_status));
 	seq_printf(m, "\tload: %s\n",
-		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
+		intel_uc_fw_status_repr(guc_fw->load_status));
 	seq_printf(m, "\tversion wanted: %d.%d\n",
-		guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
+		guc_fw->major_ver_wanted, guc_fw->minor_ver_wanted);
 	seq_printf(m, "\tversion found: %d.%d\n",
-		guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found);
+		guc_fw->major_ver_found, guc_fw->minor_ver_found);
 	seq_printf(m, "\theader: offset is %d; size = %d\n",
 		guc_fw->header_offset, guc_fw->header_size);
 	seq_printf(m, "\tuCode: offset is %d; size = %d\n",
drivers/gpu/drm/i915/i915_guc_submission.c +2 -2
index 666dab7..fb59e44 100644
@@ -1570,7 +1570,7 @@ int intel_guc_suspend(struct drm_device *dev)
 	struct i915_gem_context *ctx;
 	u32 data[3];
 
-	if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
+	if (guc->guc_fw.load_status != UC_FIRMWARE_SUCCESS)
 		return 0;
 
 	gen9_disable_guc_interrupts(dev_priv);
@@ -1598,7 +1598,7 @@ int intel_guc_resume(struct drm_device *dev)
 	struct i915_gem_context *ctx;
 	u32 data[3];
 
-	if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS)
+	if (guc->guc_fw.load_status != UC_FIRMWARE_SUCCESS)
 		return 0;
 
 	if (i915.guc_log_level >= 0)
drivers/gpu/drm/i915/intel_guc.h +20 -19
index 0053258..6dc328f 100644
@@ -91,29 +91,29 @@ struct i915_guc_client {
 	uint64_t submissions[I915_NUM_ENGINES];
 };
 
-enum intel_guc_fw_status {
-	GUC_FIRMWARE_FAIL = -1,
-	GUC_FIRMWARE_NONE = 0,
-	GUC_FIRMWARE_PENDING,
-	GUC_FIRMWARE_SUCCESS
+enum intel_uc_fw_status {
+	UC_FIRMWARE_FAIL = -1,
+	UC_FIRMWARE_NONE = 0,
+	UC_FIRMWARE_PENDING,
+	UC_FIRMWARE_SUCCESS
 };
 
 /*
  * This structure encapsulates all the data needed during the process
  * of fetching, caching, and loading the firmware image into the GuC.
  */
-struct intel_guc_fw {
-	struct drm_device *		guc_dev;
-	const char *			guc_fw_path;
-	size_t				guc_fw_size;
-	struct drm_i915_gem_object *	guc_fw_obj;
-	enum intel_guc_fw_status	guc_fw_fetch_status;
-	enum intel_guc_fw_status	guc_fw_load_status;
-
-	uint16_t			guc_fw_major_wanted;
-	uint16_t			guc_fw_minor_wanted;
-	uint16_t			guc_fw_major_found;
-	uint16_t			guc_fw_minor_found;
+struct intel_uc_fw {
+	struct drm_device *uc_dev;
+	const char *uc_fw_path;
+	size_t uc_fw_size;
+	struct drm_i915_gem_object *uc_fw_obj;
+	enum intel_uc_fw_status fetch_status;
+	enum intel_uc_fw_status load_status;
+
+	uint16_t major_ver_wanted;
+	uint16_t minor_ver_wanted;
+	uint16_t major_ver_found;
+	uint16_t minor_ver_found;
 
 	uint32_t header_size;
 	uint32_t header_offset;
@@ -140,7 +140,7 @@ struct intel_guc_log {
 };
 
 struct intel_guc {
-	struct intel_guc_fw guc_fw;
+	struct intel_uc_fw guc_fw;
 	struct intel_guc_log log;
 
 	/* GuC2Host interrupt related state */
@@ -173,9 +173,10 @@ struct intel_guc {
 extern void intel_guc_init(struct drm_device *dev);
 extern int intel_guc_setup(struct drm_device *dev);
 extern void intel_guc_fini(struct drm_device *dev);
-extern const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status);
+extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
+void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +78 -78

341 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v4 2/8 drm/i915/huc: Unified css_header struct for GuC and HuC

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

HuC firmware css header has almost exactly same definition as GuC firmware except for the sw_version. Also, add a new member fw_type into intel_uc_fw to indicate what kind of fw it is. So, the loader will pull right sw_version from header.

v2: rebased on-top of drm-intel-nightly
v3: rebased on-top of drm-intel-nightly (again).
v4: rebased + spaces.
v7: rebased.
v8: rebased.
v9: rebased. Rename device_id to guc_branch_client_version, make guc_sw_version a union. <Jeff Mcgee>. Put UC_FW_TYPE_GUC and UC_FW_TYPE_HUC into an enum.
v10: rebased.

---
 drivers/gpu/drm/i915/intel_guc.h        |  6 +++++
 drivers/gpu/drm/i915/intel_guc_fwif.h   | 21 +++++++++++++----
 drivers/gpu/drm/i915/intel_guc_loader.c | 41 ++++++++++++++++++++++-----------
 3 files changed, 51 insertions(+), 17 deletions(-)
drivers/gpu/drm/i915/intel_guc.h +6 -0
index 6dc328f..45dfa40 100644
@@ -98,6 +98,11 @@ enum intel_uc_fw_status {
 	UC_FIRMWARE_SUCCESS
 };
 
+enum {
+	UC_FW_TYPE_GUC,
+	UC_FW_TYPE_HUC
+};
+
 /*
  * This structure encapsulates all the data needed during the process
  * of fetching, caching, and loading the firmware image into the GuC.
@@ -115,6 +120,7 @@ struct intel_uc_fw {
 	uint16_t major_ver_found;
 	uint16_t minor_ver_found;
 
+	uint32_t fw_type;
 	uint32_t header_size;
 	uint32_t header_offset;
 	uint32_t rsa_size;
drivers/gpu/drm/i915/intel_guc_fwif.h +17 -4
index 324ea90..c2a7fdd 100644
@@ -154,7 +154,7 @@
  * The GuC firmware layout looks like this:
  *
  *     +-------------------------------+
- *     |        guc_css_header         |
+ *     |         uc_css_header         |
  *     |                               |
  *     | contains major/minor version  |
  *     +-------------------------------+
@@ -181,9 +181,16 @@
  * 3. Length info of each component can be found in header, in dwords.
  * 4. Modulus and exponent key are not required by driver. They may not appear
  *    in fw. So driver will load a truncated firmware in this case.
+ *
+ * HuC firmware layout is same as GuC firmware.
+ *
+ * HuC firmware css header is different. However, the only difference is where
+ * the version information is saved. The uc_css_header is unified to support
+ * both. Driver should get HuC version from uc_css_header.huc_sw_version, while
+ * uc_css_header.guc_sw_version for GuC.
  */
 
-struct guc_css_header {
+struct uc_css_header {
 	uint32_t module_type;
 	/* header_size includes all non-uCode bits, including css_header, rsa
 	 * key, modulus key and exponent data. */
@@ -214,8 +221,14 @@ struct guc_css_header {
 
 	char username[8];
 	char buildnumber[12];
-	uint32_t device_id;
-	uint32_t guc_sw_version;
+	union {
+		uint32_t guc_branch_client_version;
+		uint32_t huc_sw_version;
+	};
+	union {
+		uint32_t guc_sw_version;
+		uint32_t huc_reserved;
+	};
 	uint32_t prod_preprod_fw;
 	uint32_t reserved[12];
 	uint32_t header_info;
drivers/gpu/drm/i915/intel_guc_loader.c +28 -13

75 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v4 3/8 drm/i915/huc: Add HuC fw loading support

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 270 ++++++++++++++++++++++++++++++++
 7 files changed, 324 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 0857e50..c99b0ee 100644
@@ -55,6 +55,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 30777de..ebef982 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1804,6 +1805,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2928,6 +2930,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev)		(INTEL_INFO(dev)->has_guc)
 #define HAS_GUC_UCODE(dev)	(HAS_GUC(dev))
 #define HAS_GUC_SCHED(dev)	(HAS_GUC(dev))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))
 
 #define HAS_RESOURCE_STREAMER(dev) (INTEL_INFO(dev)->has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 45dfa40..ff6aba6 100644
@@ -183,6 +183,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index ff26d2c..dc79968 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0

42 lines not on this page · raw message

drivers/gpu/drm/i915/intel_huc_loader.c new file +270 -0

270 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

Re: [PATCH 3/8] drm/i915/huc: Add HuC fw loading support

Quoted 235 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 270 ++++++++++++++++++++++++++++++++
 7 files changed, 324 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 0857e50..c99b0ee 100644
@@ -55,6 +55,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 30777de..ebef982 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1804,6 +1805,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2928,6 +2930,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev)		(INTEL_INFO(dev)->has_guc)
 #define HAS_GUC_UCODE(dev)	(HAS_GUC(dev))
 #define HAS_GUC_SCHED(dev)	(HAS_GUC(dev))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))
 
 #define HAS_RESOURCE_STREAMER(dev) (INTEL_INFO(dev)->has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 45dfa40..ff6aba6 100644
@@ -183,6 +183,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index ff26d2c..dc79968 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_device *dev);
+#endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +36 -0
new file mode 100644
index 0000000..8d2b6ab
@@ -0,0 +1,270 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:

drivers/gpu/drm/i915/intel_huc_loader.c line 46

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+#define I915_SKL_HUC_UCODE "i915/skl_huc_ver01_07_1398.bin"

This should have gone away.

drivers/gpu/drm/i915/intel_huc_loader.c line 54

Quoted 8 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +8 -0
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+	SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);

Use the new macro.

Quoted 223 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +216 -0
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+	}
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		i915_gem_object_put(huc_fw->uc_fw_obj);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

Re: [PATCH 3/8] drm/i915/huc: Add HuC fw loading support

Quoted 248 lines · Jeff McGee
Quoted 235 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 270 ++++++++++++++++++++++++++++++++
 7 files changed, 324 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 0857e50..c99b0ee 100644
@@ -55,6 +55,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 30777de..ebef982 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1804,6 +1805,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2928,6 +2930,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev)		(INTEL_INFO(dev)->has_guc)
 #define HAS_GUC_UCODE(dev)	(HAS_GUC(dev))
 #define HAS_GUC_SCHED(dev)	(HAS_GUC(dev))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))
 
 #define HAS_RESOURCE_STREAMER(dev) (INTEL_INFO(dev)->has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 45dfa40..ff6aba6 100644
@@ -183,6 +183,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index ff26d2c..dc79968 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_device *dev);
+#endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +36 -0
new file mode 100644
index 0000000..8d2b6ab
@@ -0,0 +1,270 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:

drivers/gpu/drm/i915/intel_huc_loader.c line 46

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+#define I915_SKL_HUC_UCODE "i915/skl_huc_ver01_07_1398.bin"

This should have gone away.

Quoted 10 lines

drivers/gpu/drm/i915/intel_huc_loader.c line 54

Quoted 8 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +8 -0
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+	SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);

Use the new macro.

Nevermind. You have this right. Just need to remove above old macro definition.

Quoted 219 lines
Quoted 219 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +216 -0
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+	}
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		i915_gem_object_put(huc_fw->uc_fw_obj);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}
Signature · 1 line
2.7.4
Quoted 8 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

PATCH v11 1/1 drm/i915/huc: Add HuC fw loading support

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings. Remove old declaration.

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 269 ++++++++++++++++++++++++++++++++
 7 files changed, 323 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 3dea46a..cfea925 100644
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +3 -0
index c4a14de..3a6c412 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1791,6 +1792,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))
 
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 46990a0..338e803 100644
@@ -184,6 +184,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index 70b965d..7f3fdb0 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0

42 lines not on this page · raw message

drivers/gpu/drm/i915/intel_huc_loader.c new file +269 -0

269 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH-v11] drm/i915/huc: Add HuC fw loading support

Quoted 79 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings. Remove old declaration.

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 269 ++++++++++++++++++++++++++++++++
 7 files changed, 323 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 3dea46a..cfea925 100644
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +2 -0
index c4a14de..3a6c412 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1791,6 +1792,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_cmd_table { · line 2612

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))

Parameter name should be dev_priv.

Quoted 155 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 46990a0..338e803 100644
@@ -184,6 +184,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index 70b965d..7f3fdb0 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_device *dev);
+#endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +39 -0
new file mode 100644
index 0000000..ce50306
@@ -0,0 +1,269 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *

drivers/gpu/drm/i915/intel_huc_loader.c line 49

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"

Apologies if I missed it, but was it ever discussed why do we need the build number in the filename? More so, for the driver to know about it when it otherwise does not use it?

Quoted 69 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +69 -0
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+	SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+

drivers/gpu/drm/i915/intel_huc_loader.c line 128

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}

It may be possible to extract some commonality between this and guc_ucode_xfer(_dma), but it can be done as a followup.

Quoted 24 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +24 -0
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;

drivers/gpu/drm/i915/intel_huc_loader.c line 162

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+	}

Why not "else return" instead of the fw_path check below? (Could remove fw_path = NULL initializer then).

Quoted 11 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +11 -0
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}

drivers/gpu/drm/i915/intel_huc_loader.c line 183

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that

intel_huc_ucode_init exists anywhere?

Quoted 77 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +76 -0
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);

drivers/gpu/drm/i915/intel_huc_loader.c line 269

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		i915_gem_object_put(huc_fw->uc_fw_obj);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

Re: [PATCH-v11] drm/i915/huc: Add HuC fw loading support

Quoted 249 lines · Tvrtko Ursulin
Quoted 79 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings. Remove old declaration.

---

drivers/gpu/drm/i915/Makefile           |   1 +
drivers/gpu/drm/i915/i915_drv.h         |   3 +
drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
drivers/gpu/drm/i915/intel_guc.h        |   1 +
drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
drivers/gpu/drm/i915/intel_huc_loader.c | 269 ++++++++++++++++++++++++++++++++
7 files changed, 323 insertions(+), 2 deletions(-)

create mode 100644 drivers/gpu/drm/i915/intel_huc.h create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c

drivers/gpu/drm/i915/Makefile +1 -0
index 3dea46a..cfea925 100644
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +2 -0
index c4a14de..3a6c412 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1791,6 +1792,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_cmd_table { · line 2612

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))

Parameter name should be dev_priv.

Quoted 161 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 46990a0..338e803 100644
@@ -184,6 +184,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index 70b965d..7f3fdb0 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_device *dev);
+#endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +45 -0
new file mode 100644
index 0000000..ce50306
@@ -0,0 +1,269 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
Quoted 9 lines

drivers/gpu/drm/i915/intel_huc_loader.c line 49

Quoted 4 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +4 -0
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"

Apologies if I missed it, but was it ever discussed why do we need the build number in the filename? More so, for the driver to know about it when it otherwise does not use it?

VPG Media team that provides HuC firmware is using this format. It seems that build number really is a release minor. We are seeing new firmware from them with bug fixes where only build number is incremented. We can push back on this approach if it is a concern.
-Jeff

Quoted 235 lines
Quoted 69 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +69 -0
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+	SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+

drivers/gpu/drm/i915/intel_huc_loader.c line 128

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}

It may be possible to extract some commonality between this and guc_ucode_xfer(_dma), but it can be done as a followup.

Quoted 24 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +24 -0
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;

drivers/gpu/drm/i915/intel_huc_loader.c line 162

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+	}

Why not "else return" instead of the fw_path check below? (Could remove fw_path = NULL initializer then).

Quoted 11 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +11 -0
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}

drivers/gpu/drm/i915/intel_huc_loader.c line 183

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that

intel_huc_ucode_init exists anywhere?

Quoted 77 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +76 -0
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);

drivers/gpu/drm/i915/intel_huc_loader.c line 269

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		i915_gem_object_put(huc_fw->uc_fw_obj);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}

Regards,

Quoted 5 lines

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

Re: [PATCH-v11] drm/i915/huc: Add HuC fw loading support

[remove bouncing emails, added Rodrigo for firmware release process insights]

Quoted 259 lines · Jeff McGee
Quoted 249 lines · Tvrtko Ursulin
Quoted 79 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings. Remove old declaration.

---

drivers/gpu/drm/i915/Makefile           |   1 +
drivers/gpu/drm/i915/i915_drv.h         |   3 +
drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
drivers/gpu/drm/i915/intel_guc.h        |   1 +
drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
drivers/gpu/drm/i915/intel_huc_loader.c | 269 ++++++++++++++++++++++++++++++++
7 files changed, 323 insertions(+), 2 deletions(-)

create mode 100644 drivers/gpu/drm/i915/intel_huc.h create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c

drivers/gpu/drm/i915/Makefile +1 -0
index 3dea46a..cfea925 100644
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +2 -0
index c4a14de..3a6c412 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1791,6 +1792,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_cmd_table { · line 2612

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))

Parameter name should be dev_priv.

Quoted 161 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 46990a0..338e803 100644
@@ -184,6 +184,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index 70b965d..7f3fdb0 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_device *dev);
+#endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +45 -0
new file mode 100644
index 0000000..ce50306
@@ -0,0 +1,269 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
Quoted 9 lines

drivers/gpu/drm/i915/intel_huc_loader.c line 49

Quoted 4 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +4 -0
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"

Apologies if I missed it, but was it ever discussed why do we need the build number in the filename? More so, for the driver to know about it when it otherwise does not use it?

Quoted 4 lines

VPG Media team that provides HuC firmware is using this format. It seems that build number really is a release minor. We are seeing new firmware from them with bug fixes where only build number is incremented. We can push back on this approach if it is a concern.

One part it is a pity that we cannot have the same format between GuC and HuC, and another is kind of what's the point of the build number?

Driver cares about major-minor when loading and not about the build number at all. So I am wondering why do we need to burden our source code with it?

What will happen if we have two firmware with same major-minor and different build numbers? One question is on disk, we want to driver to load the latest one? But it also has to know about it. So we want to prevent that explicitly by embedding the build number knowledge into the driver? Or not?

We don't even technically need to change the release process at source. We could have symlinks on disk like:

skl_huc_ver1_7_1234.bin
skl_huc_ver1_7_5678.bin
skl_huc_ver1_7.bin -> skl_huc_ver1_7_5678.bin

And drop the build number from the drivers string? I don't know really, just feels strange so perhaps Rodrigo could comment with insights from the existing firmware situations.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

Re: [PATCH-v11] drm/i915/huc: Add HuC fw loading support

In reply to Tvrtko Ursulin
Quoted 426 lines

-----Original Message-----
From: Tvrtko Ursulin [mailto:[email protected]]
Sent: Tuesday, November 15, 2016 2:27 AM
To: Srivatsa, Anusha <[email protected]>; intel- [email protected]
Cc: Alex Dai <[email protected]>; Peter Antoine <[email protected]>
Subject: Re: [Intel-gfx] [PATCH-v11] drm/i915/huc: Add HuC fw loading support

Quoted 80 lines · Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings. Remove old declaration.

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 269
++++++++++++++++++++++++++++++++
 7 files changed, 323 insertions(+), 2 deletions(-)  create mode

100644 drivers/gpu/drm/i915/intel_huc.h create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c

(quoted diff) +0 -0

b/drivers/gpu/drm/i915/Makefile index 3dea46a..cfea925 100644

drivers/gpu/drm/i915/Makefile +1 -0
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support  i915-y +=
 intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_drv.h index c4a14de..3a6c412 100644

drivers/gpu/drm/i915/i915_drv.h +2 -0
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1791,6 +1792,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;

drivers/gpu/drm/i915/i915_drv.h struct drm_i915_cmd_table { · line 2612

Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev)	(HAS_GUC(dev))

Parameter name should be dev_priv.

drivers/gpu/drm/i915/intel_guc_loader.c static int guc_ucode_xfer_dma(struct drm_i915_private

Quoted 41 lines
drivers/gpu/drm/i915/i915_drv.h +0 -0
 #define HAS_RESOURCE_STREAMER(dev_priv)
 ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +0 -0
index 46990a0..338e803 100644
@@ -184,6 +184,7 @@ extern const char *intel_uc_fw_status_repr(enum

intel_uc_fw_status status); extern int intel_guc_suspend(struct drm_device *dev); extern int intel_guc_resume(struct drm_device *dev); void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);

/* i915_guc_submission.c */
int i915_guc_submission_init(struct drm_i915_private *dev_priv); diff
--git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 70b965d..7f3fdb0 100644

drivers/gpu/drm/i915/intel_guc_loader.c +0 -0
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private

*dev_priv,

drivers/gpu/drm/i915/intel_guc_loader.c static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,

Quoted 4 lines
drivers/gpu/drm/i915/intel_guc_loader.c +0 -1
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE |

START_DMA));

drivers/gpu/drm/i915/intel_guc_loader.c static int guc_ucode_xfer_dma(struct drm_i915_private · line 312

Quoted 1 line
drivers/gpu/drm/i915/intel_guc_loader.c +1 -0
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE |

START_DMA) |

drivers/gpu/drm/i915/intel_guc_loader.c static int guc_ucode_xfer_dma(struct drm_i915_private

Quoted 5 lines
drivers/gpu/drm/i915/intel_guc_loader.c +1 -0
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private

*dev_priv,

Quoted 39 lines
drivers/gpu/drm/i915/intel_guc_loader.c +2 -1
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +16 -0
new file mode 100644
index 0000000..3ce0299
@@ -0,0 +1,42 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person
+obtaining a
+ * copy of this software and associated documentation files (the
+"Software"),
+ * to deal in the Software without restriction, including without
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute,
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including

drivers/gpu/drm/i915/intel_huc.h line 26

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc.h new file +10 -0
+the next
+ * paragraph) shall be included in all copies or substantial portions
+of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO

EVENT

drivers/gpu/drm/i915/intel_huc.h line 28

Quoted 2 lines
drivers/gpu/drm/i915/intel_huc.h new file +2 -0
+SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES

Quoted 49 lines
drivers/gpu/drm/i915/intel_huc.h new file +26 -0
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+void intel_huc_init(struct drm_device *dev); void
+intel_huc_fini(struct drm_device *dev); int intel_huc_load(struct
+drm_device *dev); #endif
drivers/gpu/drm/i915/intel_huc_loader.c new file +16 -0
new file mode 100644
index 0000000..ce50306
@@ -0,0 +1,269 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person
+obtaining a
+ * copy of this software and associated documentation files (the
+"Software"),
+ * to deal in the Software without restriction, including without
+limitation
+ * the rights to use, copy, modify, merge, publish, distribute,
+sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom
+the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including

drivers/gpu/drm/i915/intel_huc_loader.c line 26

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+the next
+ * paragraph) shall be included in all copies or substantial portions
+of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO

EVENT

drivers/gpu/drm/i915/intel_huc_loader.c line 28

Quoted 2 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +2 -0
+SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES

Quoted 26 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +26 -0
+OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC
+(High
+ * Efficiency Video Coding) operations. Userspace can use the
+firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *

drivers/gpu/drm/i915/intel_huc_loader.c line 49

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+	__stringify(minor) "_" __stringify(bld_num) ".bin"

Apologies if I missed it, but was it ever discussed why do we need the build number in the filename? More so, for the driver to know about it when it otherwise does not use it?

Quoted 34 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +34 -0
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+	SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets
+up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure  */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv) {
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	struct i915_vma *vma;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return PTR_ERR(vma);

drivers/gpu/drm/i915/intel_huc_loader.c

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* init WOPCM */
+	I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+	I915_WRITE(DMA_GUC_WOPCM_OFFSET,

GUC_WOPCM_OFFSET_VALUE |

Quoted 8 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +8 -0
+			HUC_LOADING_AGENT_GUC);
+
+	/* Set the source address for the uCode */
+	offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,

drivers/gpu/drm/i915/intel_huc_loader.c

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL |

START_DMA));

Quoted 6 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +6 -0
+
+	/* Wait for DMA to finish */
+	ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+

drivers/gpu/drm/i915/intel_huc_loader.c line 128

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_vma_unpin(vma);
+
+	return ret;
+}

It may be possible to extract some commonality between this and guc_ucode_xfer(_dma), but it can be done as a followup.

Quoted 31 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +31 -0
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The
+loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because
+HW is not
+ * capable or driver yet support it. And there will be no error
+message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_device *dev) {
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return;
+
Quoted 8 lines

drivers/gpu/drm/i915/intel_huc_loader.c line 162

Quoted 5 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +5 -0
+	if (IS_SKYLAKE(dev_priv)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+	}

Why not "else return" instead of the fw_path check below? (Could remove fw_path = NULL initializer then).

Yes. I agree. Will remove that block.

Quoted 113 lines
Quoted 13 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +13 -0
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}
+
+/**

drivers/gpu/drm/i915/intel_huc_loader.c

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by
+the
+ * earlier call to intel_huc_ucode_init(), so here we need only check
+that

intel_huc_ucode_init exists anywhere?

Quoted 74 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +73 -0
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_load(struct drm_device *dev) {
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev) {

drivers/gpu/drm/i915/intel_huc_loader.c

Quoted 10 lines
drivers/gpu/drm/i915/intel_huc_loader.c new file +10 -0
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		i915_gem_object_put(huc_fw->uc_fw_obj);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE; }

Regards,

Quoted 1 line

Tvrtko

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

PATCH 1/1 drm/i915/huc: Add HuC fw loading support

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them.

v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings remove old declaration
v12: Change dev to dev_priv in macro definition.
Corrected comments.

---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc.h        |   1 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   6 +-
 drivers/gpu/drm/i915/intel_huc.h        |  42 +++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 266 ++++++++++++++++++++++++++++++++
 7 files changed, 320 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
drivers/gpu/drm/i915/Makefile +1 -0
index 3dea46a..cfea925 100644
@@ -56,6 +56,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
drivers/gpu/drm/i915/i915_drv.h +3 -0
index 006914c..2ee2653 100644
@@ -56,6 +56,7 @@
 #include "intel_bios.h"
 #include "intel_dpll_mgr.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 #include "intel_lrc.h"
 #include "intel_ringbuffer.h"
 
@@ -1798,6 +1799,7 @@ struct drm_i915_private {
 
 	struct intel_gvt *gvt;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2607,6 +2609,7 @@ struct drm_i915_cmd_table {
 #define HAS_GUC(dev_priv)	((dev_priv)->info.has_guc)
 #define HAS_GUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 #define HAS_GUC_SCHED(dev_priv)	(HAS_GUC(dev_priv))
+#define HAS_HUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 
drivers/gpu/drm/i915/i915_guc_reg.h +3 -0
index a47e1e4..64e942a 100644
@@ -61,9 +61,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
drivers/gpu/drm/i915/intel_guc.h +1 -0
index 45dfa40..ff6aba6 100644
@@ -183,6 +183,7 @@ extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
 extern int intel_guc_suspend(struct drm_device *dev);
 extern int intel_guc_resume(struct drm_device *dev);
 void intel_uc_fw_fetch(struct drm_device *dev, struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_guc_loader.c +4 -2
index 70b372b..090c727 100644
@@ -309,7 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Wait for the DMA to complete & the GuC to start up.
@@ -334,7 +335,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
 {
 	u32 wopcm_size = GUC_WOPCM_TOP;
 
@@ -512,6 +513,7 @@ int intel_guc_setup(struct drm_device *dev)
 		if (err)
 			goto fail;
 
+		intel_huc_load(dev);
 		err = guc_ucode_xfer(dev_priv);
 		if (!err)
 			break;
drivers/gpu/drm/i915/intel_huc.h new file +42 -0

42 lines not on this page · raw message

drivers/gpu/drm/i915/intel_huc_loader.c new file +266 -0

266 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#12 lore raw

PATCH v4 4/8 drm/i915/huc: Add BXT HuC Loading Support

In reply to Anusha Srivatsa

This patch adds the HuC Loading for the BXT by using the updated file construction.

Version 1.7 of the HuC firmware.

---
 drivers/gpu/drm/i915/intel_huc_loader.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_huc_loader.c +12 -1
index 8d2b6ab..5a7ce65 100644
@@ -45,6 +45,10 @@
 #define SKL_BLD_NUM 1398
 #define I915_SKL_HUC_UCODE "i915/skl_huc_ver01_07_1398.bin"
 
+#define BXT_FW_MAJOR 01
+#define BXT_FW_MINOR 07
+#define BXT_BLD_NUM 1398
+
 #define HUC_FW_PATH(platform, major, minor, bld_num) \
 	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
 	__stringify(minor) "_" __stringify(bld_num) ".bin"
@@ -53,6 +57,9 @@
 	SKL_FW_MINOR, SKL_BLD_NUM)
 MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
 
+#define I915_BXT_HUC_UCODE HUC_FW_PATH(bxt, BXT_FW_MAJOR, \
+	BXT_FW_MINOR, BXT_BLD_NUM)
+MODULE_FIRMWARE(I915_BXT_HUC_UCODE);
 /**
  * huc_ucode_xfer() - DMA's the firmware
  * @dev_priv: the drm device
@@ -160,7 +167,11 @@ void intel_huc_init(struct drm_device *dev)
 		fw_path = I915_SKL_HUC_UCODE;
 		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
 		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
-	}
+	} else if (IS_BROXTON(dev_priv)) {
+ 		fw_path = I915_BXT_HUC_UCODE;
+		huc_fw->major_ver_wanted = BXT_FW_MAJOR;
+		huc_fw->minor_ver_wanted = BXT_FW_MINOR;
+ 	}
 
 	if (fw_path == NULL)
 		return;
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v4 4/8
#13 lore raw

Re: [PATCH 4/8] drm/i915/huc: Add BXT HuC Loading Support

Quoted 52 lines · Anusha Srivatsa

This patch adds the HuC Loading for the BXT by using the updated file construction.

Version 1.7 of the HuC firmware.

---
 drivers/gpu/drm/i915/intel_huc_loader.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_huc_loader.c +12 -1
index 8d2b6ab..5a7ce65 100644
@@ -45,6 +45,10 @@
 #define SKL_BLD_NUM 1398
 #define I915_SKL_HUC_UCODE "i915/skl_huc_ver01_07_1398.bin"
 
+#define BXT_FW_MAJOR 01
+#define BXT_FW_MINOR 07
+#define BXT_BLD_NUM 1398
+
 #define HUC_FW_PATH(platform, major, minor, bld_num) \
 	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
 	__stringify(minor) "_" __stringify(bld_num) ".bin"
@@ -53,6 +57,9 @@
 	SKL_FW_MINOR, SKL_BLD_NUM)
 MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
 
+#define I915_BXT_HUC_UCODE HUC_FW_PATH(bxt, BXT_FW_MAJOR, \
+	BXT_FW_MINOR, BXT_BLD_NUM)
+MODULE_FIRMWARE(I915_BXT_HUC_UCODE);
 /**
  * huc_ucode_xfer() - DMA's the firmware
  * @dev_priv: the drm device
@@ -160,7 +167,11 @@ void intel_huc_init(struct drm_device *dev)
 		fw_path = I915_SKL_HUC_UCODE;
 		huc_fw->major_ver_wanted = SKL_FW_MAJOR;
 		huc_fw->minor_ver_wanted = SKL_FW_MINOR;
-	}
+	} else if (IS_BROXTON(dev_priv)) {
+ 		fw_path = I915_BXT_HUC_UCODE;
+		huc_fw->major_ver_wanted = BXT_FW_MAJOR;
+		huc_fw->minor_ver_wanted = BXT_FW_MINOR;
+ 	}
 
 	if (fw_path == NULL)
 		return;
Signature · 1 line
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#14 lore raw

PATCH v4 5/8 drm/i915/HuC: Add KBL huC loading Support

In reply to Anusha Srivatsa

This patch adds the support to load HuC on KBL
Version 2.0

---
 drivers/gpu/drm/i915/intel_huc_loader.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_huc_loader.c +14 -1
index 5a7ce65..dab64ba 100644
@@ -49,6 +49,10 @@
 #define BXT_FW_MINOR 07
 #define BXT_BLD_NUM 1398
 
+#define KBL_FW_MAJOR 02
+#define KBL_FW_MINOR 00
+#define KBL_BLD_NUM 1810
+
 #define HUC_FW_PATH(platform, major, minor, bld_num) \
 	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
 	__stringify(minor) "_" __stringify(bld_num) ".bin"
@@ -60,6 +64,11 @@ MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
 #define I915_BXT_HUC_UCODE HUC_FW_PATH(bxt, BXT_FW_MAJOR, \
 	BXT_FW_MINOR, BXT_BLD_NUM)
 MODULE_FIRMWARE(I915_BXT_HUC_UCODE);
+
+#define I915_KBL_HUC_UCODE HUC_FW_PATH(kbl, KBL_FW_MAJOR, \
+	KBL_FW_MINOR, KBL_BLD_NUM)
+MODULE_FIRMWARE(I915_KBL_HUC_UCODE);
+
 /**
  * huc_ucode_xfer() - DMA's the firmware
  * @dev_priv: the drm device
@@ -171,8 +180,12 @@ void intel_huc_init(struct drm_device *dev)
  		fw_path = I915_BXT_HUC_UCODE;
 		huc_fw->major_ver_wanted = BXT_FW_MAJOR;
 		huc_fw->minor_ver_wanted = BXT_FW_MINOR;
+ 	} else if (IS_KABYLAKE(dev_priv)) {
+		fw_path = I915_KBL_HUC_UCODE;
+		huc_fw->major_ver_wanted = KBL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = KBL_FW_MINOR;
  	}
-
+	
 	if (fw_path == NULL)
 		return;
 
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v4 5/8
#15 lore raw

Re: [PATCH 5/8] drm/i915/HuC: Add KBL huC loading Support

Quoted 53 lines · Anusha Srivatsa

This patch adds the support to load HuC on KBL
Version 2.0

---
 drivers/gpu/drm/i915/intel_huc_loader.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_huc_loader.c +14 -1
index 5a7ce65..dab64ba 100644
@@ -49,6 +49,10 @@
 #define BXT_FW_MINOR 07
 #define BXT_BLD_NUM 1398
 
+#define KBL_FW_MAJOR 02
+#define KBL_FW_MINOR 00
+#define KBL_BLD_NUM 1810
+
 #define HUC_FW_PATH(platform, major, minor, bld_num) \
 	"i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
 	__stringify(minor) "_" __stringify(bld_num) ".bin"
@@ -60,6 +64,11 @@ MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
 #define I915_BXT_HUC_UCODE HUC_FW_PATH(bxt, BXT_FW_MAJOR, \
 	BXT_FW_MINOR, BXT_BLD_NUM)
 MODULE_FIRMWARE(I915_BXT_HUC_UCODE);
+
+#define I915_KBL_HUC_UCODE HUC_FW_PATH(kbl, KBL_FW_MAJOR, \
+	KBL_FW_MINOR, KBL_BLD_NUM)
+MODULE_FIRMWARE(I915_KBL_HUC_UCODE);
+
 /**
  * huc_ucode_xfer() - DMA's the firmware
  * @dev_priv: the drm device
@@ -171,8 +180,12 @@ void intel_huc_init(struct drm_device *dev)
  		fw_path = I915_BXT_HUC_UCODE;
 		huc_fw->major_ver_wanted = BXT_FW_MAJOR;
 		huc_fw->minor_ver_wanted = BXT_FW_MINOR;
+ 	} else if (IS_KABYLAKE(dev_priv)) {
+		fw_path = I915_KBL_HUC_UCODE;
+		huc_fw->major_ver_wanted = KBL_FW_MAJOR;
+		huc_fw->minor_ver_wanted = KBL_FW_MINOR;
  	}
-
+	
 	if (fw_path == NULL)
 		return;
 
Signature · 1 line
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#16 lore raw

PATCH v4 6/8 drm/i915/huc: Add debugfs for HuC loading status check

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

Add debugfs entry for HuC loading status check.

v2: rebase on-top of drm-intel-nightly.
v3: rebased again.
v7: rebased.
v8: rebased.
v9: rebased.

---
 drivers/gpu/drm/i915/i915_debugfs.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +31 -0
index 7e206dd..83967a0 100644
@@ -2350,6 +2350,36 @@ static int i915_llc(struct seq_file *m, void *data)
 	return 0;
 }
 
+static int i915_huc_load_status_info(struct seq_file *m, void *data)
+{
+	struct drm_i915_private *dev_priv = node_to_i915(m->private);
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	if (!HAS_HUC_UCODE(dev_priv))
+		return 0;
+
+	seq_puts(m, "HuC firmware status:\n");
+	seq_printf(m, "\tpath: %s\n", huc_fw->uc_fw_path);
+	seq_printf(m, "\tfetch: %s\n",
+		intel_uc_fw_status_repr(huc_fw->fetch_status));
+	seq_printf(m, "\tload: %s\n",
+		intel_uc_fw_status_repr(huc_fw->load_status));
+	seq_printf(m, "\tversion wanted: %d.%d\n",
+		huc_fw->major_ver_wanted, huc_fw->minor_ver_wanted);
+	seq_printf(m, "\tversion found: %d.%d\n",
+		huc_fw->major_ver_found, huc_fw->minor_ver_found);
+	seq_printf(m, "\theader: offset is %d; size = %d\n",
+		huc_fw->header_offset, huc_fw->header_size);
+	seq_printf(m, "\tuCode: offset is %d; size = %d\n",
+		huc_fw->ucode_offset, huc_fw->ucode_size);
+	seq_printf(m, "\tRSA: offset is %d; size = %d\n",
+		huc_fw->rsa_offset, huc_fw->rsa_size);
+
+	seq_printf(m, "\nHuC status 0x%08x:\n", I915_READ(HUC_STATUS2));
+
+	return 0;
+}
+
 static int i915_guc_load_status_info(struct seq_file *m, void *data)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -5411,6 +5441,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_guc_info", i915_guc_info, 0},
 	{"i915_guc_load_status", i915_guc_load_status_info, 0},
 	{"i915_guc_log_dump", i915_guc_log_dump, 0},
+	{"i915_huc_load_status", i915_huc_load_status_info, 0},
 	{"i915_frequency_info", i915_frequency_info, 0},
 	{"i915_hangcheck_info", i915_hangcheck_info, 0},
 	{"i915_drpc_info", i915_drpc_info, 0},
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

PATCH v4 7/8 drm/i915/huc: Support HuC authentication

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication.

v2: rebased on top of drm-intel-nightly.
changed name format and upped version 1.7.
v3: rebased on top of drm-intel-nightly.
v4: changed wait_for_automic to wait_for
v5: rebased.
v7: rebased.
v8: rebased.
v9: rebased. Rename intel_huc_auh() to intel_guc_auth_huc() and place the prototype in intel_guc.h,correct the comments.
v10: rebased.

---
 drivers/gpu/drm/i915/i915_guc_submission.c | 63 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_guc.h           |  2 +-
 drivers/gpu/drm/i915/intel_guc_fwif.h      |  1 +
 drivers/gpu/drm/i915/intel_guc_loader.c    |  2 +
 4 files changed, 67 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_guc_submission.c +63 -0
index fb59e44..7809acf 100644
@@ -27,6 +27,7 @@
 #include <linux/relay.h>
 #include "i915_drv.h"
 #include "intel_guc.h"
+#include "intel_huc.h"
 
 /**
  * DOC: GuC-based command submission
@@ -1714,3 +1715,65 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val)
 
 	return ret;
 }
+
+/**
+ * intel_guc_auth_huc() - authenticate ucode
+ * @dev: the drm device
+ *
+ * Triggers a HuC fw authentication request to the GuC via host-2-guc
+ * interface.
+ */
+void intel_guc_auth_huc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+	struct intel_huc *huc = &dev_priv->huc;
+	struct i915_vma *vma;
+	int ret;
+	u32 data[2];
+
+	/* Bypass the case where there is no HuC firmware */
+	if (huc->huc_fw.fetch_status == UC_FIRMWARE_NONE ||
+	    huc->huc_fw.load_status == UC_FIRMWARE_NONE)
+		return;
+
+	if (guc->guc_fw.load_status != UC_FIRMWARE_SUCCESS) {
+		DRM_ERROR("HuC: GuC fw wasn't loaded. Can't authenticate");
+		return;
+	}
+
+	if (huc->huc_fw.load_status != UC_FIRMWARE_SUCCESS) {
+		DRM_ERROR("HuC: fw wasn't loaded. Nothing to authenticate");
+		return;
+	}
+
+	vma = i915_gem_object_ggtt_pin(huc->huc_fw.uc_fw_obj, NULL, 0, 0, 0);
+	if (IS_ERR(vma)) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+		return;
+	}
+
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	/* Specify auth action and where public signature is. */
+	data[0] = HOST2GUC_ACTION_AUTHENTICATE_HUC;
+	data[1] = i915_ggtt_offset(vma) + huc->huc_fw.rsa_offset;
+
+	ret = host2guc_action(guc, data, ARRAY_SIZE(data));
+	if (ret) {
+		DRM_ERROR("HuC: GuC did not ack Auth request\n");
+		goto out;
+	}
+
+	/* Check authentication status, it should be done by now */
+	ret = wait_for((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) > 0, 50);
+	if (ret) {
+		DRM_ERROR("HuC: Authentication failed\n");
+		goto out;
+	}
+
+out:
+	i915_vma_unpin(vma);
+}
drivers/gpu/drm/i915/intel_guc.h +1 -1
index ff6aba6..67a500c 100644
@@ -197,5 +197,5 @@ void i915_guc_flush_logs(struct drm_i915_private *dev_priv);
 void i915_guc_register(struct drm_i915_private *dev_priv);
 void i915_guc_unregister(struct drm_i915_private *dev_priv);
 int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
-
+void intel_guc_auth_huc(struct drm_device *dev);
 #endif
drivers/gpu/drm/i915/intel_guc_fwif.h +1 -0
index c2a7fdd..99a092d 100644
@@ -513,6 +513,7 @@ enum host2guc_action {
 	HOST2GUC_ACTION_EXIT_S_STATE = 0x502,
 	HOST2GUC_ACTION_SLPC_REQUEST = 0x3003,
 	HOST2GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000,
+	HOST2GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
 	HOST2GUC_ACTION_LIMIT
 };
 
drivers/gpu/drm/i915/intel_guc_loader.c +2 -0
index dc79968..11e3bbb 100644
@@ -531,6 +531,8 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_uc_fw_status_repr(guc_fw->fetch_status),
 		intel_uc_fw_status_repr(guc_fw->load_status));
 
+	intel_guc_auth_huc(dev);
+
 	if (i915.enable_guc_submission) {
 		if (i915.guc_log_level >= 0)
 			gen9_enable_guc_interrupts(dev_priv);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#18 lore raw

PATCH v4 8/8 drm/i915/get_params: Add HuC status to getparams

In reply to Anusha Srivatsa

From: Peter Antoine <[email protected]>

This patch will allow for getparams to return the status of the HuC. As the HuC has to be validated by the GuC this patch uses the validated status to show when the HuC is loaded and ready for use. You cannot use the loaded status as with the GuC as the HuC is verified after it is loaded and is not usable until it is verified.

v2: removed the forewakes as the registers are already force-woken.

     (T.Ursulin)

v4: rebased.
v5: rebased.
v6: rebased.
v7: rebased.

---
 drivers/gpu/drm/i915/i915_drv.c         |  8 ++++++++
 drivers/gpu/drm/i915/intel_huc.h        |  1 +
 drivers/gpu/drm/i915/intel_huc_loader.c | 14 ++++++++++++++
 include/uapi/drm/i915_drm.h             |  1 +
 4 files changed, 24 insertions(+)
drivers/gpu/drm/i915/i915_drv.c +8 -0
index 0213a30..52a1941 100644
@@ -49,6 +49,8 @@
 #include "i915_trace.h"
 #include "i915_vgpu.h"
 #include "intel_drv.h"
+#include "intel_guc.h"
+#include "intel_huc.h"
 
 static struct drm_driver driver;
 
@@ -346,6 +348,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		 */
 		value = 1;
 		break;
+	case I915_PARAM_HAS_HUC:
+		value = intel_is_huc_valid(dev_priv);
+		break;
 	default:
 		DRM_DEBUG("Unknown parameter %d\n", param->param);
 		return -EINVAL;
@@ -599,6 +604,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_irq;
 
+	intel_huc_init(dev);
 	intel_guc_init(dev);
 
 	ret = i915_gem_init(dev);
@@ -626,6 +632,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 		DRM_ERROR("failed to idle hardware; continuing to unload!\n");
 	i915_gem_fini(dev_priv);
 cleanup_irq:
+	intel_huc_fini(dev);
 	intel_guc_fini(dev);
 	drm_irq_uninstall(dev);
 	intel_teardown_gmbus(dev);
@@ -1313,6 +1320,7 @@ void i915_driver_unload(struct drm_device *dev)
 	/* Flush any outstanding unpin_work. */
 	drain_workqueue(dev_priv->wq);
 
+	intel_huc_fini(dev);
 	intel_guc_fini(dev);
 	i915_gem_fini(dev_priv);
 	intel_fbc_cleanup_cfb(dev_priv);
drivers/gpu/drm/i915/intel_huc.h +1 -0
index 3ce0299..2e150be 100644
@@ -39,4 +39,5 @@ struct intel_huc {
 void intel_huc_init(struct drm_device *dev);
 void intel_huc_fini(struct drm_device *dev);
 int intel_huc_load(struct drm_device *dev);
+extern int intel_is_huc_valid(struct drm_i915_private *dev_priv);
 #endif
drivers/gpu/drm/i915/intel_huc_loader.c +14 -0
index dab64ba..c6eec5b 100644
@@ -292,3 +292,17 @@ void intel_huc_fini(struct drm_device *dev)
 
 	huc_fw->fetch_status = UC_FIRMWARE_NONE;
 }
+
+/**
+ * intel_is_huc_valid() - Check to see if the HuC is fully loaded.
+ * @dev_priv:	drm device to check.
+ *
+ * This function will return true if the guc has been loaded and
+ * has valid firmware. The simplest way of doing this is to check
+ * if the HuC has been validated, if so it must have been loaded.
+ */
+int intel_is_huc_valid(struct drm_i915_private *dev_priv)
+{
+	return ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0);
+}
+
include/uapi/drm/i915_drm.h +1 -0
index 03725fe..aa7667e 100644
@@ -388,6 +388,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_POOLED_EU	 38
 #define I915_PARAM_MIN_EU_IN_POOL	 39
 #define I915_PARAM_MMAP_GTT_VERSION	 40
+#define I915_PARAM_HAS_HUC		 42
 
 typedef struct drm_i915_getparam {
 	__s32 param;
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#19 lore raw

✗ Fi.CI.BAT: failure for HuC Loading Patches

In reply to Anusha Srivatsa
== Series Details ==

== Series Details ==

Series: HuC Loading Patches
URL : https://patchwork.freedesktop.org/series/15135/
State : failure

== Summary ==

  CC [M]  drivers/gpu/drm/i915/intel_lvds.o
  CC [M]  drivers/gpu/drm/i915/intel_panel.o
  CC [M]  drivers/gpu/drm/i915/intel_sdvo.o
  LD [M]  sound/pci/hda/snd-hda-codec-generic.o
  CC [M]  drivers/gpu/drm/i915/i915_vgpu.o
  CC [M]  drivers/gpu/drm/i915/i915_gpu_error.o
  LD      drivers/input/mouse/psmouse.o
  CC [M]  drivers/gpu/drm/i915/intel_tv.o
  LD      sound/pci/built-in.o
  LD      drivers/input/mouse/built-in.o
  LD      drivers/input/built-in.o
  LD      drivers/pnp/pnpacpi/pnp.o
  LD      drivers/pnp/pnpacpi/built-in.o
  LD      drivers/pnp/built-in.o
  LD      sound/built-in.o
  LD      drivers/usb/storage/usb-storage.o
  LD      lib/raid6/raid6_pq.o
  LD      drivers/usb/storage/built-in.o
  LD      lib/raid6/built-in.o
  LD      drivers/pci/pcie/aer/aerdriver.o
  LD [M]  drivers/net/ethernet/broadcom/genet/genet.o
  LD      drivers/pci/pcie/aer/built-in.o
  LD      drivers/pci/pcie/built-in.o
  LD [M]  drivers/ssb/ssb.o
  LD [M]  drivers/gpu/drm/vgem/vgem.o
  LD      net/packet/built-in.o
  LD      drivers/video/fbdev/core/fb.o
  LD [M]  drivers/usb/serial/usbserial.o
  LD      drivers/video/fbdev/core/built-in.o
  LD      drivers/tty/serial/8250/8250.o
  LD      drivers/pci/built-in.o
  LD      drivers/scsi/scsi_mod.o
  LD [M]  drivers/net/ethernet/intel/igbvf/igbvf.o

drivers/gpu/drm/i915/intel_huc_loader.c:60:0: error: "I915_SKL_HUC_UCODE" redefined [-Werror]
#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
^
drivers/gpu/drm/i915/intel_huc_loader.c:46:0: note: this is the location of the previous definition
#define I915_SKL_HUC_UCODE "i915/skl_huc_ver01_07_1398.bin"
^

  LD      drivers/spi/built-in.o
  LD      drivers/usb/gadget/libcomposite.o
  LD      drivers/iommu/built-in.o

cc1: all warnings being treated as errors
LD drivers/usb/gadget/udc/udc-core.o
LD drivers/usb/gadget/udc/built-in.o
scripts/Makefile.build:290: recipe for target 'drivers/gpu/drm/i915/intel_huc_loader.o' failed make[4]: *** [drivers/gpu/drm/i915/intel_huc_loader.o] Error 1
make[4]: *** Waiting for unfinished jobs....

  LD      drivers/thermal/thermal_sys.o
  LD      drivers/usb/gadget/built-in.o
  LD      drivers/thermal/built-in.o
  LD      drivers/gpu/drm/drm.o
  LD [M]  drivers/net/ethernet/intel/e1000/e1000.o
  LD      drivers/scsi/sd_mod.o
  LD      drivers/scsi/built-in.o
  LD      drivers/video/console/built-in.o
  LD      drivers/video/fbdev/built-in.o
  LD      drivers/tty/serial/8250/8250_base.o
  LD      drivers/video/built-in.o
  LD      drivers/tty/serial/8250/built-in.o
  LD      drivers/tty/serial/built-in.o
  LD      fs/btrfs/btrfs.o
  LD      fs/btrfs/built-in.o
  CC      arch/x86/kernel/cpu/capflags.o
  LD      net/xfrm/built-in.o
  LD      drivers/usb/core/usbcore.o
  LD      arch/x86/kernel/cpu/built-in.o
  LD      drivers/usb/core/built-in.o
  LD      arch/x86/kernel/built-in.o
  LD [M]  drivers/net/ethernet/intel/igb/igb.o
  AR      lib/lib.a
  EXPORTS lib/lib-ksyms.o
  LD      lib/built-in.o
  LD      arch/x86/built-in.o
  LD      drivers/md/md-mod.o
  LD      drivers/md/built-in.o
  LD [M]  drivers/net/ethernet/intel/e1000e/e1000e.o
  LD      net/ipv6/ipv6.o
  LD      drivers/tty/vt/built-in.o
  LD      drivers/tty/built-in.o
  LD      net/ipv6/built-in.o
  LD      drivers/usb/host/xhci-hcd.o
  LD      drivers/usb/host/built-in.o
  LD      drivers/usb/built-in.o
  LD      fs/ext4/ext4.o
  LD      fs/ext4/built-in.o
  LD      fs/built-in.o
  LD      net/ipv4/built-in.o
  LD      net/core/built-in.o
  LD      net/built-in.o
  LD      drivers/net/ethernet/built-in.o
  LD      drivers/net/built-in.o

scripts/Makefile.build:475: recipe for target 'drivers/gpu/drm/i915' failed make[3]: *** [drivers/gpu/drm/i915] Error 2 scripts/Makefile.build:475: recipe for target 'drivers/gpu/drm' failed make[2]: *** [drivers/gpu/drm] Error 2 scripts/Makefile.build:475: recipe for target 'drivers/gpu' failed make[1]: *** [drivers/gpu] Error 2
Makefile:983: recipe for target 'drivers' failed
make: *** [drivers] Error 2

Full logs at /archive/deploy/logs/Patchwork_2959

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#20 lore raw

✓ Fi.CI.BAT: success for HuC Loading Patches (rev2)

In reply to Anusha Srivatsa
== Series Details ==

== Series Details ==

Series: HuC Loading Patches (rev2)
URL : https://patchwork.freedesktop.org/series/15135/
State : success

== Summary ==

Series 15135v2 HuC Loading Patches
https://patchwork.freedesktop.org/api/1.0/series/15135/revisions/2/mbox/

fi-bdw-5557u     total:244  pass:229  dwarn:0   dfail:0   fail:0   skip:15 
fi-bsw-n3050     total:244  pass:204  dwarn:0   dfail:0   fail:0   skip:40 
fi-bxt-t5700     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
fi-byt-j1900     total:244  pass:216  dwarn:0   dfail:0   fail:0   skip:28 
fi-byt-n2820     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-hsw-4770      total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-hsw-4770r     total:244  pass:224  dwarn:0   dfail:0   fail:0   skip:20 
fi-ilk-650       total:244  pass:191  dwarn:0   dfail:0   fail:0   skip:53 
fi-ivb-3520m     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-ivb-3770      total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-kbl-7200u     total:244  pass:222  dwarn:0   dfail:0   fail:0   skip:22 
fi-skl-6260u     total:244  pass:230  dwarn:0   dfail:0   fail:0   skip:14 
fi-skl-6700hq    total:244  pass:223  dwarn:0   dfail:0   fail:0   skip:21 
fi-snb-2520m     total:244  pass:212  dwarn:0   dfail:0   fail:0   skip:32 
fi-snb-2600      total:244  pass:211  dwarn:0   dfail:0   fail:0   skip:33 

2f21978cfd8984c79e4cbd77ce63d9f73fe226ef drm-intel-nightly: 2016y-11m-14d-21h-23m-10s UTC integration manifest b927670 drm/i915/get_params: Add HuC status to getparams
38745f2 drm/i915/huc: Support HuC authentication
82f6f4c drm/i915/huc: Add debugfs for HuC loading status check
f1e42c3 drm/i915/HuC: Add KBL huC loading Support
8fdbd07 drm/i915/huc: Add BXT HuC Loading Support
11e8e88 drm/i915/huc: Add HuC fw loading support
8dc2f0d drm/i915/huc: Unified css_header struct for GuC and HuC
1a348ec drm/i915/guc: Make the GuC fw loading helper functions general

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_2992/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#21 lore raw

✗ Fi.CI.BAT: failure for HuC Loading Patches (rev3)

In reply to Anusha Srivatsa
== Series Details ==

== Series Details ==

Series: HuC Loading Patches (rev3)
URL : https://patchwork.freedesktop.org/series/15135/
State : failure

== Summary ==

  CC [M]  drivers/gpu/drm/i915/gvt/trace_points.o
  LD      drivers/tty/serial/8250/8250.o
  CC [M]  drivers/gpu/drm/i915/gvt/firmware.o
  CC [M]  drivers/gpu/drm/i915/gvt/interrupt.o
  CC [M]  drivers/gpu/drm/i915/gvt/gtt.o
  CC [M]  drivers/gpu/drm/i915/gvt/cfg_space.o
  CC [M]  drivers/gpu/drm/i915/gvt/mmio.o
  CC [M]  drivers/gpu/drm/i915/gvt/opregion.o
  CC [M]  drivers/gpu/drm/i915/gvt/display.o
  CC [M]  drivers/gpu/drm/i915/gvt/edid.o
  CC [M]  drivers/gpu/drm/i915/gvt/scheduler.o
  CC [M]  drivers/gpu/drm/i915/gvt/execlist.o
  LD      drivers/video/fbdev/core/fb.o
  CC [M]  drivers/gpu/drm/i915/gvt/sched_policy.o
  CC [M]  drivers/gpu/drm/i915/gvt/render.o
  LD      drivers/video/fbdev/core/built-in.o
  CC [M]  drivers/gpu/drm/i915/gvt/cmd_parser.o
  LD      drivers/usb/storage/usb-storage.o
  LD      drivers/video/fbdev/built-in.o
  LD      drivers/usb/storage/built-in.o
  LD      drivers/pci/pcie/aer/aerdriver.o
  LD      drivers/pci/pcie/aer/built-in.o
  LD      drivers/pci/pcie/built-in.o
  LD      drivers/pci/built-in.o
  LD [M]  drivers/usb/serial/usbserial.o
  LD      net/unix/unix.o
  LD      net/unix/built-in.o
  LD      net/packet/built-in.o
  LD [M]  drivers/gpu/drm/vgem/vgem.o
  LD      drivers/thermal/thermal_sys.o
  LD      drivers/spi/built-in.o
  LD      drivers/thermal/built-in.o
  LD      lib/raid6/raid6_pq.o
  LD      lib/raid6/built-in.o
  LD      drivers/usb/gadget/libcomposite.o

drivers/gpu/drm/i915/intel_huc_loader.c: In function ‘intel_huc_init’:
drivers/gpu/drm/i915/intel_huc_loader.c:187:1: error: expected expression before ‘<<’ token
<<<<<<< cb4147144d9b37f8383b854807400884e3e01523
^
drivers/gpu/drm/i915/intel_huc_loader.c:192:1: error: expected expression before ‘>>’ token

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

drm/i915/HuC: Add KBL huC loading Support

^
scripts/Makefile.build:290: recipe for target 'drivers/gpu/drm/i915/intel_huc_loader.o' failed make[4]: *** [drivers/gpu/drm/i915/intel_huc_loader.o] Error 1
make[4]: *** Waiting for unfinished jobs....

  LD      drivers/tty/serial/8250/8250_base.o
  LD [M]  sound/pci/hda/snd-hda-codec-generic.o
  LD      drivers/tty/serial/8250/built-in.o
  LD      sound/pci/built-in.o
  LD [M]  drivers/net/ethernet/intel/e1000/e1000.o
  LD      drivers/video/console/built-in.o
  LD      drivers/video/built-in.o
  LD      drivers/tty/serial/built-in.o
  LD      drivers/scsi/scsi_mod.o
  LD      net/xfrm/built-in.o
  LD      sound/built-in.o
  LD      drivers/usb/gadget/udc/udc-core.o
  LD      drivers/usb/gadget/udc/built-in.o
  LD      drivers/usb/gadget/built-in.o
  LD      drivers/gpu/drm/drm.o
  LD      drivers/usb/core/usbcore.o
  LD      drivers/usb/core/built-in.o
  LD      drivers/scsi/sd_mod.o
  LD      drivers/scsi/built-in.o
  AR      lib/lib.a
  EXPORTS lib/lib-ksyms.o
  LD      lib/built-in.o
  LD      drivers/md/md-mod.o
  LD      drivers/md/built-in.o
  CC      arch/x86/kernel/cpu/capflags.o
  LD      arch/x86/kernel/cpu/built-in.o
  LD      arch/x86/kernel/built-in.o
  LD      fs/btrfs/btrfs.o
  LD      net/ipv6/ipv6.o
  LD [M]  drivers/net/ethernet/intel/igb/igb.o
  LD      net/ipv6/built-in.o
  LD      drivers/tty/vt/built-in.o
  LD      drivers/tty/built-in.o
  LD      fs/btrfs/built-in.o
  LD      arch/x86/built-in.o
  LD      drivers/usb/host/xhci-hcd.o
  LD      drivers/usb/host/built-in.o
  LD      drivers/usb/built-in.o
  LD      fs/ext4/ext4.o
  LD      fs/ext4/built-in.o
  LD      fs/built-in.o
  LD      net/core/built-in.o
  LD [M]  drivers/net/ethernet/intel/e1000e/e1000e.o
  LD      net/ipv4/built-in.o
  LD      net/built-in.o
  LD      drivers/net/ethernet/built-in.o
  LD      drivers/net/built-in.o

scripts/Makefile.build:475: recipe for target 'drivers/gpu/drm/i915' failed make[3]: *** [drivers/gpu/drm/i915] Error 2 scripts/Makefile.build:475: recipe for target 'drivers/gpu/drm' failed make[2]: *** [drivers/gpu/drm] Error 2 scripts/Makefile.build:475: recipe for target 'drivers/gpu' failed make[1]: *** [drivers/gpu] Error 2
Makefile:983: recipe for target 'drivers' failed
make: *** [drivers] Error 2

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx