Skip to contentSkip to conversation

ASoC: Intel: Skylake: Don't use dma I2S config structure in kernel

PATCH In review [email protected] 3 participants 5 messages Nov 23, 2016 – Nov 25, 2016

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ASoC: Intel: Skylake: Don't use dma I2S config structure in kernel

From: GuruprasadX Pawse <[email protected]>

I2S blob config structure can change between DSP copier module versions. We are not modifying these structures anyway and NHLT blobs specify them properly, so use the blob directly to send the dma_control ipc instead of using the predefined I2S blob config structure.

---
 sound/soc/intel/skylake/skl-messages.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
sound/soc/intel/skylake/skl-messages.c +3 -6
index 4ae021a..e79cbcf 100644
@@ -527,16 +527,14 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx,
 int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 {
 	struct skl_dma_control *dma_ctrl;
-	struct skl_i2s_config_blob config_blob;
 	struct skl_ipc_large_config_msg msg = {0};
 	int err = 0;
 
 
 	/*
-	 * if blob size is same as capablity size, then no dma control
-	 * present so return
+	 * if blob size zero, then return
 	 */
-	if (mconfig->formats_config.caps_size == sizeof(config_blob))
+	if (mconfig->formats_config.caps_size == 0)
 		return 0;
 
 	msg.large_param_id = DMA_CONTROL_ID;
@@ -550,7 +548,7 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 	dma_ctrl->node_id = skl_get_node_id(ctx, mconfig);
 
 	/* size in dwords */
-	dma_ctrl->config_length = sizeof(config_blob) / 4;
+	dma_ctrl->config_length = mconfig->formats_config.caps_size / 4;
 
 	memcpy(dma_ctrl->config_data, mconfig->formats_config.caps,
 				mconfig->formats_config.caps_size);
@@ -558,7 +556,6 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 	err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl);
 
 	kfree(dma_ctrl);
-
 	return err;
 }
 
Signature · 1 line
2.5.0
#1 lore raw

PATCH 2/2 ASoC: Intel: Skylake: Removed the unused I2S blob structure

From: GuruprasadX Pawse <[email protected]>

Now that I2S conflig blob structure is no longer in use, remove it.

---
 sound/soc/intel/skylake/skl-topology.h | 17 -----------------
 1 file changed, 17 deletions(-)
sound/soc/intel/skylake/skl-topology.h +0 -17
index 3b962d8..08d3928 100644
@@ -113,23 +113,6 @@ struct skl_cpr_gtw_cfg {
 	u32 config_data[1];
 } __packed;
 
-struct skl_i2s_config_blob {
-	u32 gateway_attrib;
-	u32 tdm_ts_group[8];
-	u32 ssc0;
-	u32 ssc1;
-	u32 sscto;
-	u32 sspsp;
-	u32 sstsa;
-	u32 ssrsa;
-	u32 ssc2;
-	u32 sspsp2;
-	u32 ssc3;
-	u32 ssioc;
-	u32 mdivc;
-	u32 mdivr;
-} __packed;
-
 struct skl_dma_control {
 	u32 node_id;
 	u32 config_length;
Signature · 1 line
2.5.0
Acked-by on v1 1/2
#3 lore raw
In reply to [email protected]
Quoted 6 lines · On Wed, Nov 23, 2016 at 10:46:26PM +0530, [email protected] wrote:

From: GuruprasadX Pawse <[email protected]>

I2S blob config structure can change between DSP copier module versions. We are not modifying these structures anyway and NHLT blobs specify them properly, so use the blob directly to send the dma_control ipc instead of using the predefined I2S blob config structure.

Both:

Signature · 1 line
~Vinod
maintainer
#2 lore raw

Applied "ASoC: Intel: Skylake: Removed the unused I2S blob structure" to the asoc tree

In reply to [email protected]

The patch

ASoC: Intel: Skylake: Removed the unused I2S blob structure

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 48458cc891232ba6cb0270ba03520f54536d590a Mon Sep 17 00:00:00 2001

From: GuruprasadX Pawse <[email protected]>
Date: Wed, 23 Nov 2016 22:46:27 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Removed the unused I2S blob structure

Now that I2S conflig blob structure is no longer in use, remove it.

---
 sound/soc/intel/skylake/skl-topology.h | 17 -----------------
 1 file changed, 17 deletions(-)
sound/soc/intel/skylake/skl-topology.h +0 -17
index 3b962d84bcb8..08d39280b07b 100644
@@ -113,23 +113,6 @@ struct skl_cpr_gtw_cfg {
 	u32 config_data[1];
 } __packed;
 
-struct skl_i2s_config_blob {
-	u32 gateway_attrib;
-	u32 tdm_ts_group[8];
-	u32 ssc0;
-	u32 ssc1;
-	u32 sscto;
-	u32 sspsp;
-	u32 sstsa;
-	u32 ssrsa;
-	u32 ssc2;
-	u32 sspsp2;
-	u32 ssc3;
-	u32 ssioc;
-	u32 mdivc;
-	u32 mdivr;
-} __packed;
-
 struct skl_dma_control {
 	u32 node_id;
 	u32 config_length;
Signature · 1 line
2.10.2
maintainer
#4 lore raw

Applied "ASoC: Intel: Skylake: Don't use dma I2S config structure in kernel" to the asoc tree

In reply to [email protected]

The patch

ASoC: Intel: Skylake: Don't use dma I2S config structure in kernel

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From c186fe7401e4234aee6796eda3ad38bd57507899 Mon Sep 17 00:00:00 2001

From: GuruprasadX Pawse <[email protected]>
Date: Wed, 23 Nov 2016 22:46:26 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Don't use dma I2S config structure in
kernel

I2S blob config structure can change between DSP copier module versions. We are not modifying these structures anyway and NHLT blobs specify them properly, so use the blob directly to send the dma_control ipc instead of using the predefined I2S blob config structure.

---
 sound/soc/intel/skylake/skl-messages.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
sound/soc/intel/skylake/skl-messages.c +3 -6
index 4ae021aabc3a..e79cbcf6e462 100644
@@ -527,16 +527,14 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx,
 int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 {
 	struct skl_dma_control *dma_ctrl;
-	struct skl_i2s_config_blob config_blob;
 	struct skl_ipc_large_config_msg msg = {0};
 	int err = 0;
 
 
 	/*
-	 * if blob size is same as capablity size, then no dma control
-	 * present so return
+	 * if blob size zero, then return
 	 */
-	if (mconfig->formats_config.caps_size == sizeof(config_blob))
+	if (mconfig->formats_config.caps_size == 0)
 		return 0;
 
 	msg.large_param_id = DMA_CONTROL_ID;
@@ -550,7 +548,7 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 	dma_ctrl->node_id = skl_get_node_id(ctx, mconfig);
 
 	/* size in dwords */
-	dma_ctrl->config_length = sizeof(config_blob) / 4;
+	dma_ctrl->config_length = mconfig->formats_config.caps_size / 4;
 
 	memcpy(dma_ctrl->config_data, mconfig->formats_config.caps,
 				mconfig->formats_config.caps_size);
@@ -558,7 +556,6 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig)
 	err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl);
 
 	kfree(dma_ctrl);
-
 	return err;
 }
 
Signature · 1 line
2.10.2