FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT
Subsystems (2)
PATCH 1/1 FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 5 +++++ drivers/gpu/drm/i915/intel_panel.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1633,6 +1633,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;
drivers/gpu/drm/i915/intel_bios.c +5 -0
@@ -330,6 +330,8 @@ static u32 get_blocksize(const void *block_data) method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller =0 ; + dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
@@ -341,6 +343,9 @@ static u32 get_blocksize(const void *block_data) dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type]); + +DRM_DEBUG_KMS ("VBT BL controller %u\n" , + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */
drivers/gpu/drm/i915/intel_panel.c +1 -1
@@ -1612,7 +1612,7 @@ static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe* For BXT hard coding the Backlight controller to 0. * TODO : Read the controller value from VBT and generalize */ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller; pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller));
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/1 FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 5 +++++ drivers/gpu/drm/i915/intel_panel.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1633,6 +1633,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;
drivers/gpu/drm/i915/intel_bios.c +5 -0
@@ -330,6 +330,8 @@ static u32 get_blocksize(const void *block_data) method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller =0 ; + dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
@@ -341,6 +343,9 @@ static u32 get_blocksize(const void *block_data) dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type]); + +DRM_DEBUG_KMS ("VBT BL controller %u\n" , + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */
drivers/gpu/drm/i915/intel_panel.c +1 -1
@@ -1612,7 +1612,7 @@ static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe* For BXT hard coding the Backlight controller to 0. * TODO : Read the controller value from VBT and generalize */ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller; pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller));
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/1 drm/i915: Parse panel BL controller from VBT
In reply to Vidya SrinivasCurrently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
v2: Updated the commit header
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 5 +++++ drivers/gpu/drm/i915/intel_panel.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1633,6 +1633,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;
drivers/gpu/drm/i915/intel_bios.c +5 -0
@@ -330,6 +330,8 @@ static u32 get_blocksize(const void *block_data) method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller =0 ; + dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
@@ -341,6 +343,9 @@ static u32 get_blocksize(const void *block_data) dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type]); + +DRM_DEBUG_KMS ("VBT BL controller %u\n" , + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */
drivers/gpu/drm/i915/intel_panel.c +1 -1
@@ -1612,7 +1612,7 @@ static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe* For BXT hard coding the Backlight controller to 0. * TODO : Read the controller value from VBT and generalize */ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller; pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller));
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: Parse panel BL controller from VBT
I currently have this same patch in my tree (well with the two changes below) and have been testing it so with the changes.
Quoted 30 lines · On Wed, 7 Dec 2016 20:32:18 +0530 Vidya Srinivas <[email protected]>…
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
v2: Updated the commit header
Signed-off-by Uma Shankar <[email protected]>Signed-off-by Vidya Srinivas <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 5 +++++ drivers/gpu/drm/i915/intel_panel.c | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -1633,6 +1633,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;drivers/gpu/drm/i915/intel_bios.c +0
-0
drivers/gpu/drm/i915/intel_bios.c static u32 get_blocksize(const void *block_data) · line 333
Quoted 4 lines
drivers/gpu/drm/i915/intel_bios.c +1
-0@@ -330,6 +330,8 @@ static u32 get_blocksize(const void *block_data) method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller =0 ;
Setting it to zero first seems redundant. Is there a reason you do this?
Quoted 19 lines
drivers/gpu/drm/i915/intel_bios.c +4
-0+ dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;@@ -341,6 +343,9 @@ static u32 get_blocksize(const void *block_data) dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type]); + +DRM_DEBUG_KMS ("VBT BL controller %u\n" , + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */ drivers/gpu/drm/i915/intel_panel.c +0
-0
drivers/gpu/drm/i915/intel_panel.c static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe · line 1615
Quoted 5 lines
drivers/gpu/drm/i915/intel_panel.c +1
-1@@ -1612,7 +1612,7 @@ static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe* For BXT hard coding the Backlight controller to 0. * TODO : Read the controller value from VBT and generalize */ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller;
You should remove the comment above now that it's not hard coded.
Quoted 3 lines
drivers/gpu/drm/i915/intel_panel.c +0
-0pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller));
Signature · 11 lines
-- Bob Paauwe [email protected] IOTG / PED Software Organization Intel Corp. Folsom, CA (916) 356-6193 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH] drm/i915: Parse panel BL controller from VBT
In reply to Vidya SrinivasQuoted 72 lines · Vidya Srinivas
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
v2: Updated the commit header
Signed-off-by Uma Shankar <[email protected]>Signed-off-by Vidya Srinivas <[email protected]>---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_bios.c | 5 +++++
drivers/gpu/drm/i915/intel_panel.c | 2 +-3 files changed, 7 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/i915_drv.h +0
-0@@ -1633,6 +1633,7 @@ struct intel_vbt_data { bool present; bool active_low_pwm;u8
min_brightness; /* min_brightness/255 of
max */drivers/gpu/drm/i915/i915_drv.h +1
-0+u8 controller;/* brightness controller number */
enumintel_backlight_typetype;
} backlight;drivers/gpu/drm/i915/intel_bios.c +0
-0@@ -330,6 +330,8 @@ static u32 get_blocksize(const void *block_data)
method = &backlight_data-Quoted 1 line
backlight_control[panel_type];
dev_priv->vbt.backlight.type=method->type;drivers/gpu/drm/i915/intel_bios.c +2
-0+ dev_priv->vbt.backlight.controller =0 ; + dev_priv->vbt.backlight.controller = method-Quoted 1 line
controller;
}
dev_priv->vbt.backlight.pwm_freq_hz=entry->pwm_freq_hz;drivers/gpu/drm/i915/intel_bios.c +0
-0@@ -341,6 +343,9 @@ static u32 get_blocksize(const void *block_data)dev_priv->vbt.backlight.active_low_pwm ? "low" : "high",
dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type]);drivers/gpu/drm/i915/intel_bios.c +3
-0+ +DRM_DEBUG_KMS ("VBT BL controller %u\n" , + dev_priv->vbt.backlight.controller);}
/* Try to find sdvo panel data */drivers/gpu/drm/i915/intel_panel.c +0
-0@@ -1612,7 +1612,7 @@ static int vlv_setup_backlight(struct
intel_connector*connector, enum pipe pipe
* For BXT hard coding the Backlight controller to 0.
* TODO : Read the controller value from VBT and generalize */drivers/gpu/drm/i915/intel_panel.c +1
-1- panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv-Quoted 1 line
vbt.backlight.controller;
pwm_ctl= I915_READ(BXT_BLC_PWM_CTL(panel-Quoted 1 line
backlight.controller));
Signature · 6 lines
Mika Kahola - Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT (rev3)
In reply to Vidya Srinivas== Series Details ==
== Series Details ==
Series: FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT (rev3)
URL : https://patchwork.freedesktop.org/series/16489/
State : success
== Summary ==
Series 16489v3 FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT
https://patchwork.freedesktop.org/api/1.0/series/16489/revisions/3/mbox/
fi-bdw-5557u total:247 pass:219 dwarn:0 dfail:0 fail:0 skip:28 fi-bsw-n3050 total:247 pass:195 dwarn:0 dfail:0 fail:0 skip:52 fi-byt-j1900 total:247 pass:206 dwarn:0 dfail:0 fail:0 skip:41 fi-byt-n2820 total:247 pass:202 dwarn:0 dfail:0 fail:0 skip:45 fi-hsw-4770 total:247 pass:214 dwarn:0 dfail:0 fail:0 skip:33 fi-hsw-4770r total:247 pass:214 dwarn:0 dfail:0 fail:0 skip:33 fi-ilk-650 total:247 pass:181 dwarn:0 dfail:0 fail:0 skip:66 fi-ivb-3520m total:247 pass:213 dwarn:0 dfail:0 fail:0 skip:34 fi-ivb-3770 total:247 pass:212 dwarn:0 dfail:0 fail:0 skip:35 fi-kbl-7500u total:247 pass:212 dwarn:0 dfail:0 fail:0 skip:35 fi-skl-6260u total:247 pass:220 dwarn:0 dfail:0 fail:0 skip:27 fi-skl-6700hq total:247 pass:214 dwarn:0 dfail:0 fail:0 skip:33 fi-skl-6700k total:247 pass:210 dwarn:3 dfail:0 fail:0 skip:34 fi-skl-6770hq total:247 pass:220 dwarn:0 dfail:0 fail:0 skip:27 fi-snb-2520m total:247 pass:202 dwarn:0 dfail:0 fail:0 skip:45 fi-snb-2600 total:247 pass:201 dwarn:0 dfail:0 fail:0 skip:46
e46c97f4cfb63328f5bbbc0fb85c3f53703792f2 drm-tip: 2016y-12m-07d-17h-47m-18s UTC integration manifest 452ecd0 drm/i915: Parse panel BL controller from VBT
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3221/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/1 drm/i915: Parse panel backlight controller from VBT
In reply to Vidya SrinivasFrom: Vidya Srinivas <[email protected]>
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
v2 by Jani:
- drop obsolete comments, drop redundant initialization (Bob)
- merge debug logging into one
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 6 ++++-- drivers/gpu/drm/i915/intel_panel.c | 17 +++-------------- 3 files changed, 8 insertions(+), 16 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1716,6 +1716,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;
drivers/gpu/drm/i915/intel_bios.c +4 -2
@@ -330,17 +330,19 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv, method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; dev_priv->vbt.backlight.min_brightness = entry->min_brightness;DRM_DEBUG_KMS ("VBT backlight PWM modulation frequency %u Hz, " -"active %s, min brightness %u, level %u\n" , +"active %s, min brightness %u, level %u, controller %u\n" , dev_priv->vbt.backlight.pwm_freq_hz, dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, - backlight_data->level[panel_type]); + backlight_data->level[panel_type], + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */
drivers/gpu/drm/i915/intel_panel.c +3 -14
@@ -1039,10 +1039,7 @@ static void bxt_enable_backlight(struct intel_connector *connector)enum pipe pipe =intel_get_pipe_from_connector (connector);u32 pwm_ctl, val; -/* To use 2nd set of backlight registers, utility pin has to be -* enabled with PWM mode. -* The field should only be changed when the utility pin is disabled -*/ +/* Controller 1 uses the utility pin. */ if (panel->backlight.controller ==1 ) { val =I915_READ (UTIL_PIN_CTL );if (val &UTIL_PIN_ENABLE ) {
@@ -1608,19 +1605,11 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)struct intel_panel *panel = &connector->panel;u32 pwm_ctl, val; -/* -* For BXT hard coding the Backlight controller to 0. -* TODO : Read the controller value from VBT and generalize -*/ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller; pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller)); -/* Keeping the check if controller 1 is to be programmed. -* This will come into affect once the VBT parsing -* is fixed for controller selection, and controller 1 is used -* for a prticular display configuration. -*/ +/* Controller 1 uses the utility pin. */ if (panel->backlight.controller ==1 ) { val =I915_READ (UTIL_PIN_CTL ); panel->backlight.util_pin_active_low =
Signature · 6 lines
2.1.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
AppliedRe: [PATCH v2] drm/i915: Parse panel backlight controller from VBT
Quoted 9 lines · Jani Nikula
From: Vidya Srinivas <[email protected]>
Currently the backlight controller is taken as 0. It needs to derive value from the VBT. Adding the necessary changes.
v2 by Jani:
- drop obsolete comments, drop redundant initialization (Bob)
- merge debug logging into one
Quoted 6 lines
Signed-off-by Uma Shankar <[email protected]>Signed-off-by Vidya Srinivas <[email protected]>Reviewed-by Bob Paauwe <[email protected]>Tested-by Bob Paauwe <[email protected]>Tested-by Mika Kahola <[email protected]>Signed-off-by Jani Nikula <[email protected]>
Pushed to dinq, thanks for the patch.
BR,
Jani.
Quoted 82 lines
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 6 ++++-- drivers/gpu/drm/i915/intel_panel.c | 17 +++-------------- 3 files changed, 8 insertions(+), 16 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -1716,6 +1716,7 @@ struct intel_vbt_data {bool present;bool active_low_pwm;u8 min_brightness;/* min_brightness/255 of max */ +u8 controller;/* brightness controller number */ enum intel_backlight_type type; } backlight;drivers/gpu/drm/i915/intel_bios.c +4
-2@@ -330,17 +330,19 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv, method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; + dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; dev_priv->vbt.backlight.min_brightness = entry->min_brightness;DRM_DEBUG_KMS ("VBT backlight PWM modulation frequency %u Hz, " -"active %s, min brightness %u, level %u\n" , +"active %s, min brightness %u, level %u, controller %u\n" , dev_priv->vbt.backlight.pwm_freq_hz, dev_priv->vbt.backlight.active_low_pwm ?"low" :"high" , dev_priv->vbt.backlight.min_brightness, - backlight_data->level[panel_type]); + backlight_data->level[panel_type], + dev_priv->vbt.backlight.controller); }/* Try to find sdvo panel data */ drivers/gpu/drm/i915/intel_panel.c +3
-14@@ -1039,10 +1039,7 @@ static void bxt_enable_backlight(struct intel_connector *connector)enum pipe pipe =intel_get_pipe_from_connector (connector);u32 pwm_ctl, val; -/* To use 2nd set of backlight registers, utility pin has to be -* enabled with PWM mode. -* The field should only be changed when the utility pin is disabled -*/ +/* Controller 1 uses the utility pin. */ if (panel->backlight.controller ==1 ) { val =I915_READ (UTIL_PIN_CTL );if (val &UTIL_PIN_ENABLE ) {@@ -1608,19 +1605,11 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)struct intel_panel *panel = &connector->panel;u32 pwm_ctl, val; -/* -* For BXT hard coding the Backlight controller to 0. -* TODO : Read the controller value from VBT and generalize -*/ - panel->backlight.controller =0 ; + panel->backlight.controller = dev_priv->vbt.backlight.controller; pwm_ctl =I915_READ (BXT_BLC_PWM_CTL (panel->backlight.controller)); -/* Keeping the check if controller 1 is to be programmed. -* This will come into affect once the VBT parsing -* is fixed for controller selection, and controller 1 is used -* for a prticular display configuration. -*/ +/* Controller 1 uses the utility pin. */ if (panel->backlight.controller ==1 ) { val =I915_READ (UTIL_PIN_CTL ); panel->backlight.util_pin_active_low =
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT (rev4)
In reply to Vidya Srinivas== Series Details ==
== Series Details ==
Series: FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT (rev4)
URL : https://patchwork.freedesktop.org/series/16489/
State : success
== Summary ==
Series 16489v4 FOR_UPSTREAM [VPG]: drm/i915: Parse panel BL controller from VBT
https://patchwork.freedesktop.org/api/1.0/series/16489/revisions/4/mbox/
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-a:
pass -> FAIL (fi-ctg-l9400) UNSTABLE
Subgroup read-crc-pipe-a-frame-sequence:
fail -> PASS (fi-ctg-l9400) UNSTABLEfi-bdw-5557u total:247 pass:233 dwarn:0 dfail:0 fail:0 skip:14 fi-bsw-n3050 total:247 pass:208 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-t5700 total:247 pass:220 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-j1900 total:247 pass:220 dwarn:0 dfail:0 fail:0 skip:27 fi-byt-n2820 total:247 pass:216 dwarn:0 dfail:0 fail:0 skip:31 fi-ctg-l9400 total:210 pass:165 dwarn:0 dfail:0 fail:1 skip:43 fi-hsw-4770 total:247 pass:228 dwarn:0 dfail:0 fail:0 skip:19 fi-hsw-4770r total:247 pass:228 dwarn:0 dfail:0 fail:0 skip:19 fi-ilk-650 total:247 pass:195 dwarn:0 dfail:0 fail:0 skip:52 fi-ivb-3520m total:247 pass:226 dwarn:0 dfail:0 fail:0 skip:21 fi-ivb-3770 total:247 pass:226 dwarn:0 dfail:0 fail:0 skip:21 fi-kbl-7500u total:247 pass:226 dwarn:0 dfail:0 fail:0 skip:21 fi-skl-6260u total:247 pass:234 dwarn:0 dfail:0 fail:0 skip:13 fi-skl-6700hq total:247 pass:227 dwarn:0 dfail:0 fail:0 skip:20 fi-skl-6700k total:247 pass:224 dwarn:3 dfail:0 fail:0 skip:20 fi-skl-6770hq total:247 pass:234 dwarn:0 dfail:0 fail:0 skip:13 fi-snb-2520m total:247 pass:216 dwarn:0 dfail:0 fail:0 skip:31 fi-snb-2600 total:247 pass:215 dwarn:0 dfail:0 fail:0 skip:32
e705da1e357d4db0db0b21bc6a2ea96df4453e05 drm-tip: 2016y-12m-08d-09h-02m-15s UTC integration manifest 1a6fcb9 drm/i915: Parse panel backlight controller from VBT
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_3232/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx