arm: aspeed: dts: Add I2C POWER8 OCC compatible string
Subsystems (2)
PATCH 6/7 arm: aspeed: dts: Add I2C POWER8 OCC compatible string
From: "Edward A. James" <[email protected]>
Add devicetree entry to probe up the POWER8 OCC driver on I2C bus.
Signed-off-by Edward A. James <[email protected]>
Signed-off-by Andrew Jeffery <[email protected]>
--- arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +9 -0
@@ -20,6 +20,15 @@ }; }; +&i2c3 { + status = "okay"; + + occ@50 { + compatible = "ibm,p8-occ-i2c"; + reg = <0x50>; + }; +}; + &uart5 { status = "okay"; };
Signature · 1 line
1.9.1
Quoted 28 lines · On Fri, 2016-12-16 at 14:36 -0600, [email protected] wrote:
Quoted 1 line
From: "Edward A. James" <[email protected]>
Add devicetree entry to probe up the POWER8 OCC driver on I2C bus.
Quoted 2 lines
Signed-off-by Edward A. James <[email protected]>Signed-off-by Andrew Jeffery <[email protected]>---
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 9 +++++++++1 file changed, 9 insertions(+)arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +0
-0@@ -20,6 +20,15 @@ > }; };
+&i2c3 {arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts line 24
Quoted 1 line
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +1
-0+ status = "okay";+
Quoted 4 lines
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +4
-0+ occ@50 { + compatible = "ibm,p8-occ-i2c"; + reg = <0x50>; + };arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +2
-0+}; +&uart5 {
Quoted 2 lines
Quoted 1 line
status = "okay";
};
This patch should be split out into a separate series that gets sent to the Aspeed maintainer (Joel).
However, it looks good. Given it's been completely re-written I'd drop my signed-off-by. Instead you can add:
Reviewed-by Andrew Jeffery <[email protected]>
Andrew