drm : adds Y-coordinate and Colorimetry Format
Subsystems (2)
PATCH 1/2 drm : adds Y-coordinate and Colorimetry Format
PSR2 vsc revision number hb2( as per table 6-11)is updated to 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format indication. A DP Source device is allowed to indicate the pixel encoding/colorimetry format to the DP Sink device with VSC SDP only when the DP Sink device supports it ( i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3; is set to 1).
v2: (Jani)
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
- Add DP_PSR2_SU_GRANULARITY_REQUIRED.
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
- Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
--- include/drm/drm_dp_helper.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
include/drm/drm_dp_helper.h +7 -1
@@ -194,7 +194,8 @@# define DP_PSR_SETUP_TIME_0 (6 << 1)# define DP_PSR_SETUP_TIME_MASK (7 << 1)# define DP_PSR_SETUP_TIME_SHIFT 1 - +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4)/* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5)/* eDP 1.4b */ /* * 0x80-0x8f describe downstream port capabilities, but there are two layouts * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
@@ -568,6 +569,11 @@#define DP_RECEIVER_ALPM_STATUS 0x200b/* eDP 1.4 */ # define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) +#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 +# define DP_GTC_CAP (1 << 0) +# define DP_AV_SYNC_CAP (1 << 2) +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3) +/* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 39 lines · vathsala nagaraju
PSR2 vsc revision number hb2( as per table 6-11)is updated to 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format indication. A DP Source device is allowed to indicate the pixel encoding/colorimetry format to the DP Sink device with VSC SDP only when the DP Sink device supports it ( i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in theDPRX_FEATURE_ENUMERATION_LISTregister (DPCD Address 02210h, bit 3; is set to 1).v2: (Jani)
- ChangeDP_PSR_Y_COORDINATEtoDP_PSR2_SU_Y_COORDINATE_REQUIRED.
- AddDP_PSR2_SU_GRANULARITY_REQUIRED.
- ChangeDPRX_FEATURE_ENUMERATION_LISTtoDP_DPRX.
- AddGTC_CAPandAV_SYNC_CAP, other bits inDPRX_FEATURE_ENUMERATION_LIST.Cc Rodrigo Vivi <[email protected]>Cc Jim Bride <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- include/drm/drm_dp_helper.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)include/drm/drm_dp_helper.h +2
-1@@ -194,7 +194,8 @@# define DP_PSR_SETUP_TIME_0 (6 << 1)# define DP_PSR_SETUP_TIME_MASK (7 << 1)# define DP_PSR_SETUP_TIME_SHIFT 1 - +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4)/* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5)/* eDP 1.4b */ /* * 0x80-0x8f describe downstream port capabilities, but there are two layouts * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
include/drm/drm_dp_helper.h line 575
Quoted 7 lines
include/drm/drm_dp_helper.h +4
-0@@ -568,6 +569,11 @@#define DP_RECEIVER_ALPM_STATUS 0x200b/* eDP 1.4 */ # define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) +#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 +# define DP_GTC_CAP (1 << 0) +# define DP_AV_SYNC_CAP (1 << 2) +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3)
The spec continues with bits 4 to 7 in the next page...
Quoted 4 lines
include/drm/drm_dp_helper.h +1
-0+/* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
In DP V1.3 spec , Table 2-149 , page number-374 , for Register 0x2210 , bit 7:4 is reserved.
-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Friday, December 23, 2016 6:57 PM
To: Nagaraju, Vathsala <[email protected]>; [email protected]; [email protected]
Cc: Vivi, Rodrigo <[email protected]>
Subject: Re: [Intel-gfx] [PATCH 1/2] drm : adds Y-coordinate and Colorimetry Format
Quoted 42 lines · vathsala nagaraju
PSR2 vsc revision number hb2( as per table 6-11)is updated to 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format indication. A DP Source device is allowed to indicate the pixel encoding/colorimetry format to the DP Sink device with VSC SDP only when the DP Sink device supports it ( i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in theDPRX_FEATURE_ENUMERATION_LISTregister (DPCD Address 02210h, bit 3; is set to 1).v2: (Jani)
- ChangeDP_PSR_Y_COORDINATEtoDP_PSR2_SU_Y_COORDINATE_REQUIRED.
- AddDP_PSR2_SU_GRANULARITY_REQUIRED.
- ChangeDPRX_FEATURE_ENUMERATION_LISTtoDP_DPRX.
- AddGTC_CAPandAV_SYNC_CAP, other bits inDPRX_FEATURE_ENUMERATION_LIST.Cc Rodrigo Vivi <[email protected]>Cc Jim Bride <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- include/drm/drm_dp_helper.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)include/drm/drm_dp_helper.h +2
-1@@ -194,7 +194,8 @@# define DP_PSR_SETUP_TIME_0 (6 << 1)# define DP_PSR_SETUP_TIME_MASK (7 << 1)# define DP_PSR_SETUP_TIME_SHIFT 1 - +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4)/* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5)/* eDP 1.4b */ /* * 0x80-0x8f describe downstream port capabilities, but there are two layouts * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, @@ -568,6 +569,11 @@
#defineDP_RECEIVER_ALPM_STATUS0x200b/* eDP 1.4 */# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0)
include/drm/drm_dp_helper.h line 575
Quoted 4 lines
include/drm/drm_dp_helper.h +4
-0+#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 +# define DP_GTC_CAP (1 << 0) +# define DP_AV_SYNC_CAP (1 << 2) +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3)
The spec continues with bits 4 to 7 in the next page...
Quoted 4 lines
+
/* DP 1.2 Sideband message defines */
/* peer device type - DP 1.2a Table 2-92 */
#defineDP_PEER_DEVICE_NONE0x0
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines · Vathsala
In DP V1.3 spec , Table 2-149 , page number-374 , for Register
0x2210, bit 7:4 is reserved.
See DP 1.4.
BR,
Jani.
Quoted 65 lines
-----Original Message-----
From: Jani Nikula [mailto:[email protected]]
Sent: Friday, December 23, 2016 6:57 PM
To: Nagaraju, Vathsala <[email protected]>; [email protected]; [email protected]
Cc: Vivi, Rodrigo <[email protected]>
Subject: Re: [Intel-gfx] [PATCH 1/2] drm : adds Y-coordinate and Colorimetry FormatQuoted 42 lines · vathsala nagaraju
PSR2 vsc revision number hb2( as per table 6-11)is updated to 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format indication. A DP Source device is allowed to indicate the pixel encoding/colorimetry format to the DP Sink device with VSC SDP only when the DP Sink device supports it ( i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in theDPRX_FEATURE_ENUMERATION_LISTregister (DPCD Address 02210h, bit 3; is set to 1).v2: (Jani)
- ChangeDP_PSR_Y_COORDINATEtoDP_PSR2_SU_Y_COORDINATE_REQUIRED.
- AddDP_PSR2_SU_GRANULARITY_REQUIRED.
- ChangeDPRX_FEATURE_ENUMERATION_LISTtoDP_DPRX.
- AddGTC_CAPandAV_SYNC_CAP, other bits inDPRX_FEATURE_ENUMERATION_LIST.Cc Rodrigo Vivi <[email protected]>Cc Jim Bride <[email protected]>Signed-off-by Vathsala Nagaraju <[email protected]>--- include/drm/drm_dp_helper.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)include/drm/drm_dp_helper.h +2
-1@@ -194,7 +194,8 @@# define DP_PSR_SETUP_TIME_0 (6 << 1)# define DP_PSR_SETUP_TIME_MASK (7 << 1)# define DP_PSR_SETUP_TIME_SHIFT 1 - +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED (1 << 4)/* eDP 1.4a */ +# define DP_PSR2_SU_GRANULARITY_REQUIRED (1 << 5)/* eDP 1.4b */ /* * 0x80-0x8f describe downstream port capabilities, but there are two layouts * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not, @@ -568,6 +569,11 @@
#defineDP_RECEIVER_ALPM_STATUS0x200b/* eDP 1.4 */# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0)include/drm/drm_dp_helper.h line 575
Quoted 4 lines
include/drm/drm_dp_helper.h +4
-0+#define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 +# define DP_GTC_CAP (1 << 0) +# define DP_AV_SYNC_CAP (1 << 2) +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3)The spec continues with bits 4 to 7 in the next page...
Quoted 4 lines
+
/* DP 1.2 Sideband message defines */
/* peer device type - DP 1.2a Table 2-92 */
#defineDP_PEER_DEVICE_NONE0x0--
Jani Nikula, Intel Open Source Technology Center
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx