patch "USB: serial: keyspan_pda: verify endpoints at probe" added to usb-linus

This is a note to let you know that I've just added the patch titled

USB: serial: keyspan_pda: verify endpoints at probe

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: Johan Hovold <[email protected]>
Date: Tue, 3 Jan 2017 16:39:48 +0100
Subject: USB: serial: keyspan_pda: verify endpoints at probe

Check for the expected endpoints in attach() and fail loudly if not present.

Note that failing to do this appears to be benign since da280e348866 ("USB: keyspan_pda: clean up write-urb busy handling") which prevents a NULL-pointer dereference in write() by never marking a non-existent write-urb as free.

---
 drivers/usb/serial/keyspan_pda.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

index e49ad0c63ad8..83523fcf6fb9 100644
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 

@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
+	.attach =		keyspan_pda_attach,
 	.port_probe =		keyspan_pda_port_probe,
 	.port_remove =		keyspan_pda_port_remove,
 };

2.11.0