ppc: add a IBM 40p machine (RS/6000, PReP)

This device is a partial duplicate of System I/O device available in hw/ppc/prep.c This new one doesn't have all the Motorola-specific registers.
The old one should be deprecated and removed with the 'prep' machine.

Partial documentation available at ftp://ftp.software.ibm.com/rs6000/technology/spec/srp1_1.exe section 6.1.5 (I/O Device Mapping)

Signed-off-by Hervé Poussineau <[email protected]>

---
 hw/ppc/Makefile.objs   |   1 +
 hw/ppc/prep_systemio.c | 309 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/ppc/trace-events    |   4 +
 3 files changed, 314 insertions(+)
 create mode 100644 hw/ppc/prep_systemio.c

hw/ppc/Makefile.objs +1 -0

index 8025129..db72297 100644
@@ -16,6 +16,7 @@ obj-y += ppc405_boards.o ppc4xx_devs.o ppc405_uc.o ppc440_bamboo.o
 obj-y += ppc4xx_pci.o
 # PReP
 obj-$(CONFIG_PREP) += prep.o
+obj-$(CONFIG_PREP) += prep_systemio.o
 # OldWorld PowerMac
 obj-$(CONFIG_MAC) += mac_oldworld.o
 # NewWorld PowerMac

hw/ppc/prep_systemio.c new file +77 -0

new file mode 100644
index 0000000..fa05cb0
@@ -0,0 +1,309 @@
+/*
+ * QEMU PReP System I/O emulation
+ *
+ * Copyright (c) 2017 Hervé Poussineau
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/isa/isa.h"
+#include "exec/address-spaces.h"
+#include "qemu/error-report.h" /* for error_report() */
+#include "sysemu/sysemu.h" /* for vm_stop() */
+#include "cpu.h"
+#include "trace.h"
+
+#define TYPE_PREP_SYSTEMIO "prep-systemio"
+#define PREP_SYSTEMIO(obj) \
+    OBJECT_CHECK(PrepSystemIoState, (obj), TYPE_PREP_SYSTEMIO)
+
+/* Bit as defined in PowerPC Reference Plaform v1.1, sect. 6.1.5, p. 132 */
+#define PREP_BIT(n) (1 << (7 - (n)))
+
+typedef struct PrepSystemIoState {
+    ISADevice parent_obj;
+    MemoryRegion ppc_parity_mem;
+
+    qemu_irq non_contiguous_io_map_irq;
+    uint8_t sreset; /* 0x0092 */
+    uint8_t equipment; /* 0x080c */
+    uint8_t system_control; /* 0x081c */
+    uint8_t iomap_type; /* 0x0850 */
+    uint8_t ibm_planar_id; /* 0x0852 */
+    qemu_irq softreset_irq;
+    PortioList portio;
+} PrepSystemIoState;
+
+/* PORT 0092 -- Special Port 92 (Read/Write) */
+
+enum {
+    PORT0092_SOFTRESET  = PREP_BIT(7),
+    PORT0092_LE_MODE    = PREP_BIT(6),
+};
+
+static void prep_port0092_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    PrepSystemIoState *s = opaque;
+
+    trace_prep_systemio_write(addr, val);
+
+    s->sreset = val & PORT0092_SOFTRESET;
+    qemu_set_irq(s->softreset_irq, s->sreset);
+
+    if ((val & PORT0092_LE_MODE) != 0) {
+        /* XXX Not supported yet */
+        error_report("little-endian mode not supported");
+        vm_stop(RUN_STATE_PAUSED);
+    } else {
+        /* Nothing to do */
+    }
+}

hw/ppc/prep_systemio.c new file +222 -0

+    trace_prep_systemio_read(addr, ret);
+    return ret;
+}
+
+/* PORT 0808 -- Hardfile Light Register (Write Only) */
+
+enum {
+    PORT0808_HARDFILE_LIGHT_ON  = PREP_BIT(7),
+};
+
+static void prep_port0808_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    trace_prep_systemio_write(addr, val);
+}
+
+/* PORT 0810 -- Password Protect 1 Register (Write Only) */
+
+/* reset by port 0x4D in the SIO */
+static void prep_port0810_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    trace_prep_systemio_write(addr, val);
+}
+
+/* PORT 0812 -- Password Protect 2 Register (Write Only) */
+
+/* reset by port 0x4D in the SIO */
+static void prep_port0812_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    trace_prep_systemio_write(addr, val);
+}
+
+/* PORT 0814 -- L2 Invalidate Register (Write Only) */
+
+static void prep_port0814_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    trace_prep_systemio_write(addr, val);
+}
+
+/* PORT 0818 -- Reserved for Keylock (Read Only) */
+
+enum {
+    PORT0818_KEYLOCK_SIGNAL_HIGH    = PREP_BIT(7),
+};
+
+static uint32_t prep_port0818_read(void *opaque, uint32_t addr)
+{
+    uint32_t val = 0;
+    trace_prep_systemio_read(addr, val);
+    return val;
+}
+
+/* PORT 080C -- Equipment */
+
+enum {
+    PORT080C_SCSIFUSE               = PREP_BIT(1),
+    PORT080C_L2_COPYBACK            = PREP_BIT(4),
+    PORT080C_L2_256                 = PREP_BIT(5),
+    PORT080C_UPGRADE_CPU            = PREP_BIT(6),
+    PORT080C_L2                     = PREP_BIT(7),
+};
+
+static uint32_t prep_port080c_read(void *opaque, uint32_t addr)
+{
+    PrepSystemIoState *s = opaque;
+    trace_prep_systemio_read(addr, s->equipment);
+    return s->equipment;
+}
+
+/* PORT 081C -- System Control Register (Read/Write) */
+
+enum {
+    PORT081C_FLOPPY_MOTOR_INHIBIT   = PREP_BIT(3),
+    PORT081C_MASK_TEA               = PREP_BIT(2),
+    PORT081C_L2_UPDATE_INHIBIT      = PREP_BIT(1),
+    PORT081C_L2_CACHEMISS_INHIBIT   = PREP_BIT(0),
+};
+
+static void prep_port081c_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    static const uint8_t mask = PORT081C_FLOPPY_MOTOR_INHIBIT |
+                                PORT081C_MASK_TEA |
+                                PORT081C_L2_UPDATE_INHIBIT |
+                                PORT081C_L2_CACHEMISS_INHIBIT;
+    PrepSystemIoState *s = opaque;
+    trace_prep_systemio_write(addr, val);
+    s->system_control = val & mask;
+}
+
+static uint32_t prep_port081c_read(void *opaque, uint32_t addr)
+{
+    PrepSystemIoState *s = opaque;
+    trace_prep_systemio_read(addr, s->system_control);
+    return s->system_control;
+}
+
+/* System Board Identification */
+
+static uint32_t prep_port0852_read(void *opaque, uint32_t addr)
+{
+    PrepSystemIoState *s = opaque;
+    trace_prep_systemio_read(addr, s->ibm_planar_id);
+    return s->ibm_planar_id;
+}
+
+/* PORT 0850 -- I/O Map Type Register (Read/Write) */
+
+enum {
+    PORT0850_IOMAP_NONCONTIGUOUS    = PREP_BIT(7),
+};
+
+static uint32_t prep_port0850_read(void *opaque, uint32_t addr)
+{
+    PrepSystemIoState *s = opaque;
+    trace_prep_systemio_read(addr, s->iomap_type);
+    return s->iomap_type;
+}
+
+static void prep_port0850_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    PrepSystemIoState *s = opaque;
+
+    trace_prep_systemio_write(addr, val);
+    qemu_set_irq(s->non_contiguous_io_map_irq,
+                 val & PORT0850_IOMAP_NONCONTIGUOUS);
+    s->iomap_type = val & PORT0850_IOMAP_NONCONTIGUOUS;
+}
+
+static const MemoryRegionPortio ppc_io800_port_list[] = {
+    { 0x092, 1, 1, .read = prep_port0092_read,
+                   .write = prep_port0092_write, },
+    { 0x808, 1, 1, .write = prep_port0808_write, },
+    { 0x80c, 1, 1, .read = prep_port080c_read, },
+    { 0x810, 1, 1, .write = prep_port0810_write, },
+    { 0x812, 1, 1, .write = prep_port0812_write, },
+    { 0x814, 1, 1, .write = prep_port0814_write, },
+    { 0x818, 1, 1, .read = prep_port0818_read },
+    { 0x81c, 1, 1, .read = prep_port081c_read,
+                   .write = prep_port081c_write, },
+    { 0x850, 1, 1, .read = prep_port0850_read,
+                   .write = prep_port0850_write, },
+    { 0x852, 1, 1, .read = prep_port0852_read, },
+    PORTIO_END_OF_LIST()
+};
+
+static uint64_t ppc_parity_error_readl(void *opaque, hwaddr addr,
+                                       unsigned int size)
+{
+    uint32_t val = 0;
+    trace_prep_systemio_read((unsigned int)addr, val);
+    return val;
+}
+
+static const MemoryRegionOps ppc_parity_error_ops = {
+    .read = ppc_parity_error_readl,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void prep_systemio_realize(DeviceState *dev, Error **errp)
+{
+    ISADevice *isa = ISA_DEVICE(dev);
+    PrepSystemIoState *s = PREP_SYSTEMIO(dev);
+    PowerPCCPU *cpu;
+
+    qdev_init_gpio_out(dev, &s->non_contiguous_io_map_irq, 1);
+    s->iomap_type = PORT0850_IOMAP_NONCONTIGUOUS;
+    qemu_set_irq(s->non_contiguous_io_map_irq,
+                 s->iomap_type & PORT0850_IOMAP_NONCONTIGUOUS);
+    cpu = POWERPC_CPU(first_cpu);
+    s->softreset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET];
+
+    isa_register_portio_list(isa, &s->portio, 0x0, ppc_io800_port_list, s,
+                             "systemio800");
+
+    memory_region_init_io(&s->ppc_parity_mem, OBJECT(dev),
+                          &ppc_parity_error_ops, s, "ppc-parity", 0x4);
+    memory_region_add_subregion(get_system_memory(), 0xbfffeff0,
+                                &s->ppc_parity_mem);
+}
+
+static const VMStateDescription vmstate_prep_systemio = {
+    .name = "prep_systemio",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(sreset, PrepSystemIoState),
+        VMSTATE_UINT8(system_control, PrepSystemIoState),
+        VMSTATE_UINT8(iomap_type, PrepSystemIoState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static Property prep_systemio_properties[] = {
+    DEFINE_PROP_UINT8("ibm-planar-id", PrepSystemIoState, ibm_planar_id, 0),
+    DEFINE_PROP_UINT8("equipment", PrepSystemIoState, equipment, 0),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void prep_systemio_class_initfn(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = prep_systemio_realize;
+    dc->vmsd = &vmstate_prep_systemio;
+    dc->props = prep_systemio_properties;
+}
+
+static TypeInfo prep_systemio800_info = {
+    .name          = TYPE_PREP_SYSTEMIO,
+    .parent        = TYPE_ISA_DEVICE,
+    .instance_size = sizeof(PrepSystemIoState),
+    .class_init    = prep_systemio_class_initfn,
+};
+
+static void prep_systemio_register_types(void)
+{
+    type_register_static(&prep_systemio800_info);
+}
+
+type_init(prep_systemio_register_types)

hw/ppc/trace-events +4 -0

index 2297ead..2ba6166 100644
@@ -74,3 +74,7 @@ ppc_tb_adjust(uint64_t offs1, uint64_t offs2, int64_t diff, int64_t seconds) "ad
 # hw/ppc/prep.c
 prep_io_800_writeb(uint32_t addr, uint32_t val) "0x%08" PRIx32 " => 0x%02" PRIx32
 prep_io_800_readb(uint32_t addr, uint32_t retval) "0x%08" PRIx32 " <= 0x%02" PRIx32
+
+# hw/ppc/prep_systemio.c
+prep_systemio_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
+prep_systemio_write(uint32_t addr, uint32_t val) "write addr=%x val=%x"

Signed-off-by Hervé Poussineau <[email protected]>

---
 default-configs/ppc-softmmu.mak |   1 +
 hw/ppc/Makefile.objs            |   1 +
 hw/ppc/rs6000_mc.c              | 232 ++++++++++++++++++++++++++++++++++++++++
 hw/ppc/trace-events             |   7 ++
 4 files changed, 241 insertions(+)
 create mode 100644 hw/ppc/rs6000_mc.c

default-configs/ppc-softmmu.mak +1 -0

index d4d0f9b..e567658 100644
@@ -47,3 +47,4 @@ CONFIG_LIBDECNUMBER=y
 # For PReP
 CONFIG_MC146818RTC=y
 CONFIG_ISA_TESTDEV=y
+CONFIG_RS6000_MC=y

hw/ppc/Makefile.objs +1 -0

index db72297..0012934 100644
@@ -17,6 +17,7 @@ obj-y += ppc4xx_pci.o
 # PReP
 obj-$(CONFIG_PREP) += prep.o
 obj-$(CONFIG_PREP) += prep_systemio.o
+obj-${CONFIG_RS6000_MC} += rs6000_mc.o
 # OldWorld PowerMac
 obj-$(CONFIG_MAC) += mac_oldworld.o
 # NewWorld PowerMac

hw/ppc/rs6000_mc.c new file +232 -0

new file mode 100644
index 0000000..b613565
@@ -0,0 +1,232 @@
+/*
+ * QEMU RS/6000 memory controller
+ *
+ * Copyright (c) 2017 Hervé Poussineau
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) version 3 or any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/isa/isa.h"
+#include "exec/address-spaces.h"
+#include "hw/boards.h"
+#include "qapi/error.h"
+#include "trace.h"
+
+#define TYPE_RS6000MC "rs6000-mc"
+#define RS6000MC_DEVICE(obj) \
+    OBJECT_CHECK(RS6000MCState, (obj), TYPE_RS6000MC)
+
+typedef struct RS6000MCState {
+    ISADevice parent_obj;
+    /* see US patent 5,684,979 for details (expired 2001-11-04) */
+    uint32_t ram_size;
+    bool autoconfigure;
+    MemoryRegion simm[6];
+    unsigned int simm_size[6];
+    uint32_t end_address[8];
+    uint8_t port0820_index;
+    PortioList portio;
+} RS6000MCState;
+
+/* P0RT 0803 -- SIMM ID Register (32/8 MB) (Read Only) */
+
+static uint32_t rs6000mc_port0803_read(void *opaque, uint32_t addr)
+{
+    RS6000MCState *s = opaque;
+    uint32_t val = 0;
+    int socket;
+
+    /* (1 << socket) indicates 32 MB SIMM at given socket */
+    for (socket = 0; socket < 6; socket++) {
+        if (s->simm_size[socket] == 32) {
+            val |= (1 << socket);
+        }
+    }
+
+    trace_rs6000mc_id_read(addr, val);
+    return val;
+}
+
+/* PORT 0804 -- SIMM Presence Register (Read Only) */
+
+static uint32_t rs6000mc_port0804_read(void *opaque, uint32_t addr)
+{
+    RS6000MCState *s = opaque;
+    uint32_t val = 0xff;
+    int socket;
+
+    /* (1 << socket) indicates SIMM absence at given socket */
+    for (socket = 0; socket < 6; socket++) {
+        if (s->simm_size[socket]) {
+            val &= ~(1 << socket);
+        }
+    }
+    s->port0820_index = 0;
+
+    trace_rs6000mc_presence_read(addr, val);
+    return val;
+}
+
+/* Memory Controller Size Programming Register */
+
+static uint32_t rs6000mc_port0820_read(void *opaque, uint32_t addr)
+{
+    RS6000MCState *s = opaque;
+    uint32_t val = s->end_address[s->port0820_index] & 0x1f;
+    s->port0820_index = (s->port0820_index + 1) & 7;
+    trace_rs6000mc_size_read(addr, val);
+    return val;
+}
+
+static void rs6000mc_port0820_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    RS6000MCState *s = opaque;
+    uint8_t socket = val >> 5;
+    uint32_t end_address = val & 0x1f;
+
+    trace_rs6000mc_size_write(addr, val);
+    s->end_address[socket] = end_address;
+    if (socket > 0 && socket < 7) {
+        if (s->simm_size[socket - 1]) {
+            uint32_t size;
+            uint32_t start_address = 0;
+            if (socket > 1) {
+                start_address = s->end_address[socket - 1];
+            }
+
+            size = end_address - start_address;
+            memory_region_set_enabled(&s->simm[socket - 1], size != 0);
+            memory_region_set_address(&s->simm[socket - 1],
+                                      start_address * 8 * 1024 * 1024);
+        }
+    }
+}
+
+/* Read Memory Parity Error */
+
+enum {
+    PORT0841_NO_ERROR_DETECTED = 0x01,
+};
+
+static uint32_t rs6000mc_port0841_read(void *opaque, uint32_t addr)
+{
+    uint32_t val = PORT0841_NO_ERROR_DETECTED;
+    trace_rs6000mc_parity_read(addr, val);
+    return val;
+}
+
+static const MemoryRegionPortio rs6000mc_port_list[] = {
+    { 0x803, 1, 1, .read = rs6000mc_port0803_read },
+    { 0x804, 1, 1, .read = rs6000mc_port0804_read },
+    { 0x820, 1, 1, .read = rs6000mc_port0820_read,
+                   .write = rs6000mc_port0820_write, },
+    { 0x841, 1, 1, .read = rs6000mc_port0841_read },
+    PORTIO_END_OF_LIST()
+};
+
+static void rs6000mc_realize(DeviceState *dev, Error **errp)
+{
+    RS6000MCState *s = RS6000MC_DEVICE(dev);
+    int socket = 0;
+    unsigned int ram_size = s->ram_size / (1024 * 1024);
+
+    while (socket < 6) {
+        if (ram_size >= 64) {
+            s->simm_size[socket] = 32;
+            s->simm_size[socket + 1] = 32;
+            ram_size -= 64;
+        } else if (ram_size >= 16) {
+            s->simm_size[socket] = 8;
+            s->simm_size[socket + 1] = 8;
+            ram_size -= 16;
+        } else {
+            /* Not enough memory */
+            break;
+        }
+        socket += 2;
+    }
+
+    for (socket = 0; socket < 6; socket++) {
+        if (s->simm_size[socket]) {
+            char name[] = "simm.?";
+            name[5] = socket + '0';
+            memory_region_allocate_system_memory(&s->simm[socket], OBJECT(dev),
+                                                 name, s->simm_size[socket]
+                                                 * 1024 * 1024);
+            memory_region_add_subregion_overlap(get_system_memory(), 0,
+                                                &s->simm[socket], socket);
+        }
+    }
+    if (ram_size) {
+        /* unable to push all requested RAM in SIMMs */
+        error_setg(errp, "RAM size incompatible with this board. "
+                   "Try again with something else, like %d MB",
+                   s->ram_size / 1024 / 1024 - ram_size);
+        return;
+    }
+
+    if (s->autoconfigure) {
+        uint32_t start_address = 0;
+        for (socket = 0; socket < 6; socket++) {
+            if (s->simm_size[socket]) {
+                memory_region_set_enabled(&s->simm[socket], true);
+                memory_region_set_address(&s->simm[socket], start_address);
+                start_address += memory_region_size(&s->simm[socket]);
+            }
+        }
+    }
+
+    isa_register_portio_list(ISA_DEVICE(dev), &s->portio, 0x0,
+                             rs6000mc_port_list, s, "rs6000mc");
+}
+
+static const VMStateDescription vmstate_rs6000mc = {
+    .name = "rs6000-mc",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(port0820_index, RS6000MCState),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static Property rs6000mc_properties[] = {
+    DEFINE_PROP_UINT32("ram-size", RS6000MCState, ram_size, 0),
+    DEFINE_PROP_BOOL("auto-configure", RS6000MCState, autoconfigure, true),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void rs6000mc_class_initfn(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = rs6000mc_realize;
+    dc->vmsd = &vmstate_rs6000mc;
+    dc->props = rs6000mc_properties;
+}
+
+static const TypeInfo rs6000mc_info = {
+    .name          = TYPE_RS6000MC,
+    .parent        = TYPE_ISA_DEVICE,
+    .instance_size = sizeof(RS6000MCState),
+    .class_init    = rs6000mc_class_initfn,
+};
+
+static void rs6000mc_types(void)
+{
+    type_register_static(&rs6000mc_info);
+}
+
+type_init(rs6000mc_types)

hw/ppc/trace-events +7 -0

index 2ba6166..42b8ec0 100644
@@ -78,3 +78,10 @@ prep_io_800_readb(uint32_t addr, uint32_t retval) "0x%08" PRIx32 " <= 0x%02" PRI
 # hw/ppc/prep_systemio.c
 prep_systemio_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
 prep_systemio_write(uint32_t addr, uint32_t val) "write addr=%x val=%x"
+
+# hw/ppc/rs6000_mc.c
+rs6000mc_id_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
+rs6000mc_presence_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
+rs6000mc_size_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
+rs6000mc_size_write(uint32_t addr, uint32_t val) "write addr=%x val=%x"
+rs6000mc_parity_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"

Machine supports both Open Hack'Ware and OpenBIOS.
Open Hack'Ware is the default because OpenBIOS is currently unable to boot PReP boot partitions or PReP kernels.

Signed-off-by Hervé Poussineau <[email protected]>

---
 default-configs/ppc-softmmu.mak |   1 +
 hw/ppc/prep.c                   | 227 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)

default-configs/ppc-softmmu.mak +1 -0

index e567658..7dd004e 100644
@@ -18,6 +18,7 @@ CONFIG_I82378=y
 CONFIG_PC87312=y
 CONFIG_MACIO=y
 CONFIG_PCSPK=y
+CONFIG_CS4231A=y
 CONFIG_CUDA=y
 CONFIG_ADB=y
 CONFIG_MAC_NVRAM=y

hw/ppc/prep.c +38 -0

index 9fb89d3..ec252de 100644
@@ -2,6 +2,7 @@
  * QEMU PPC PREP hardware System Emulator
  *
  * Copyright (c) 2003-2007 Jocelyn Mayer
+ * Copyright (c) 2017 Hervé Poussineau
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal

@@ -43,6 +44,7 @@
 #include "hw/isa/pc87312.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/arch_init.h"
+#include "sysemu/kvm.h"
 #include "sysemu/qtest.h"
 #include "exec/address-spaces.h"
 #include "trace.h"

@@ -54,6 +56,8 @@
 
 #define MAX_IDE_BUS 2
 
+#define CFG_ADDR 0xf0000510
+
 #define BIOS_SIZE (1024 * 1024)
 #define BIOS_FILENAME "ppc_rom.bin"
 #define KERNEL_LOAD_ADDR 0x01000000

@@ -316,6 +320,12 @@ static uint32_t PREP_io_800_readb (void *opaque, uint32_t addr)
 
 #define NVRAM_SIZE        0x2000
 
+static void fw_cfg_boot_set(void *opaque, const char *boot_device,
+                            Error **errp)
+{
+    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
+}
+
 static void ppc_prep_reset(void *opaque)
 {
     PowerPCCPU *cpu = opaque;

@@ -677,4 +687,221 @@ static void prep_machine_init(MachineClass *mc)
     mc->default_boot_order = "cad";
 }
 
+static int prep_set_cmos_checksum(DeviceState *dev, void *opaque)
+{
+    uint16_t checksum = *(uint16_t *)opaque;
+    ISADevice *rtc;
+
+    if (object_dynamic_cast(OBJECT(dev), "mc146818rtc")) {
+        rtc = ISA_DEVICE(dev);
+        rtc_set_memory(rtc, 0x2e, checksum & 0xff);
+        rtc_set_memory(rtc, 0x3e, checksum & 0xff);
+        rtc_set_memory(rtc, 0x2f, checksum >> 8);
+        rtc_set_memory(rtc, 0x3f, checksum >> 8);
+    }
+    return 0;
+}
+
+static void ibm_40p_init(MachineState *machine)
+{
+    CPUPPCState *env = NULL;
+    uint16_t cmos_checksum;
+    PowerPCCPU *cpu;
+    DeviceState *dev;
+    SysBusDevice *pcihost;
+    Nvram *m48t59 = NULL;
+    PCIBus *pci_bus;
+    ISABus *isa_bus;
+    void *fw_cfg;
+    int i;
+    uint32_t kernel_base = 0, initrd_base = 0;

hw/ppc/prep.c +4 -0

+        exit(1);
+    }
+    env = &cpu->env;
+

hw/ppc/prep.c +140 -0

+    }
+
+    /* PCI host */
+    dev = qdev_create(NULL, "raven-pcihost");
+    if (!bios_name) {
+        bios_name = BIOS_FILENAME;
+    }
+    qdev_prop_set_string(dev, "bios-name", bios_name);
+    qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
+    pcihost = SYS_BUS_DEVICE(dev);
+    object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL);
+    qdev_init_nofail(dev);
+    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
+    if (pci_bus == NULL) {
+        fprintf(stderr, "Couldn't create PCI host controller.\n");
+        exit(1);
+    }
+
+    /* PCI -> ISA bridge */
+    dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(11, 0), "i82378"));
+    qdev_connect_gpio_out(dev, 0,
+                          cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
+    sysbus_connect_irq(pcihost, 0, qdev_get_gpio_in(dev, 15));
+    sysbus_connect_irq(pcihost, 1, qdev_get_gpio_in(dev, 13));
+    sysbus_connect_irq(pcihost, 2, qdev_get_gpio_in(dev, 15));
+    sysbus_connect_irq(pcihost, 3, qdev_get_gpio_in(dev, 13));
+    isa_bus = ISA_BUS(qdev_get_child_bus(dev, "isa.0"));
+
+    /* Memory controller */
+    dev = DEVICE(isa_create(isa_bus, "rs6000-mc"));
+    qdev_prop_set_uint32(dev, "ram-size", machine->ram_size);
+    qdev_init_nofail(dev);
+
+    /* initialize CMOS checksums */
+    cmos_checksum = 0x6aa9;
+    qbus_walk_children(BUS(isa_bus), prep_set_cmos_checksum, NULL, NULL, NULL,
+                       &cmos_checksum);
+
+    /* initialize audio subsystem */
+    audio_init();
+
+    /* add some more devices */
+    if (defaults_enabled()) {
+        isa_create_simple(isa_bus, "i8042");
+        m48t59 = NVRAM(isa_create_simple(isa_bus, "isa-m48t59"));
+
+        dev = DEVICE(isa_create(isa_bus, "cs4231a"));
+        qdev_prop_set_uint32(dev, "iobase", 0x830);
+        qdev_prop_set_uint32(dev, "irq", 10);
+        qdev_init_nofail(dev);
+
+        dev = DEVICE(isa_create(isa_bus, "pc87312"));
+        qdev_prop_set_uint32(dev, "config", 12);
+        qdev_init_nofail(dev);
+
+        dev = DEVICE(isa_create(isa_bus, "prep-systemio"));
+        qdev_prop_set_uint32(dev, "ibm-planar-id", 0xfc);
+        qdev_prop_set_uint32(dev, "equipment", 0xc0);
+        qdev_init_nofail(dev);
+
+        pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "lsi53c810");
+
+        /* XXX: s3-trio at PCI_DEVFN(2, 0) */
+        pci_vga_init(pci_bus);
+
+        for (i = 0; i < nb_nics; i++) {
+            pci_nic_init_nofail(&nd_table[i], pci_bus, "pcnet",
+                                i == 0 ? "3" : NULL);
+        }
+    }
+
+    /* Prepare firmware configuration for OpenBIOS */
+    fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
+
+    if (machine->kernel_filename) {
+        /* load kernel */
+        kernel_base = KERNEL_LOAD_ADDR;
+        kernel_size = load_image_targphys(machine->kernel_filename,
+                                          kernel_base,
+                                          machine->ram_size - kernel_base);
+        if (kernel_size < 0) {
+            error_report("could not load kernel '%s'",
+                          machine->kernel_filename);
+            exit(1);
+        }
+        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
+        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
+        /* load initrd */
+        if (machine->initrd_filename) {
+            initrd_base = INITRD_LOAD_ADDR;
+            initrd_size = load_image_targphys(machine->initrd_filename,
+                                              initrd_base,
+                                              machine->ram_size - initrd_base);
+            if (initrd_size < 0) {
+                error_report("could not load initial ram disk '%s'",
+                             machine->initrd_filename);
+                exit(1);
+            }
+            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
+            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
+        }
+        if (machine->kernel_cmdline && *machine->kernel_cmdline) {
+            fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
+            pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
+                             machine->kernel_cmdline);
+            fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA,
+                              machine->kernel_cmdline);
+            fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
+                           strlen(machine->kernel_cmdline) + 1);
+        }
+        boot_device = 'm';
+    } else {
+        boot_device = machine->boot_order[0];
+    }
+
+    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
+    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_PREP);
+
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
+
+    fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
+    if (kvm_enabled()) {
+#ifdef CONFIG_KVM
+        uint8_t *hypercall;
+
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq());
+        hypercall = g_malloc(16);
+        kvmppc_get_hypercall(env, hypercall, 16);
+        fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
+#endif
+    } else {
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, NANOSECONDS_PER_SECOND);
+    }
+    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, boot_device);
+    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
+

hw/ppc/prep.c +15 -0

+    }
+}
+
+static void ibm_40p_machine_init(MachineClass *mc)
+{
+    mc->desc = "IBM RS/6000 7020 (40p)",
+    mc->init = ibm_40p_init;
+    mc->max_cpus = 1;
+    mc->pci_allow_0_address = true;
+    mc->default_ram_size = 128 * M_BYTE;
+    mc->block_default_type = IF_SCSI;
+    mc->default_boot_order = "c";
+}
+
+DEFINE_MACHINE("40p", ibm_40p_machine_init)
 DEFINE_MACHINE("prep", prep_machine_init)

Quoted 100 lines · Hervé Poussineau

Machine supports both Open Hack'Ware and OpenBIOS.
Open Hack'Ware is the default because OpenBIOS is currently unable to boot PReP boot partitions or PReP kernels.

Signed-off-by Hervé Poussineau <[email protected]>

---
 default-configs/ppc-softmmu.mak |   1 +
 hw/ppc/prep.c                   | 227 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)

default-configs/ppc-softmmu.mak +1 -0

index e567658..7dd004e 100644
@@ -18,6 +18,7 @@ CONFIG_I82378=y
 CONFIG_PC87312=y
 CONFIG_MACIO=y
 CONFIG_PCSPK=y
+CONFIG_CS4231A=y
 CONFIG_CUDA=y
 CONFIG_ADB=y
 CONFIG_MAC_NVRAM=y

hw/ppc/prep.c +42 -0

index 9fb89d3..ec252de 100644
@@ -2,6 +2,7 @@
  * QEMU PPC PREP hardware System Emulator
  *
  * Copyright (c) 2003-2007 Jocelyn Mayer
+ * Copyright (c) 2017 Hervé Poussineau
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal

@@ -43,6 +44,7 @@
 #include "hw/isa/pc87312.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/arch_init.h"
+#include "sysemu/kvm.h"
 #include "sysemu/qtest.h"
 #include "exec/address-spaces.h"
 #include "trace.h"

@@ -54,6 +56,8 @@
 
 #define MAX_IDE_BUS 2
 
+#define CFG_ADDR 0xf0000510
+
 #define BIOS_SIZE (1024 * 1024)
 #define BIOS_FILENAME "ppc_rom.bin"
 #define KERNEL_LOAD_ADDR 0x01000000

@@ -316,6 +320,12 @@ static uint32_t PREP_io_800_readb (void *opaque, uint32_t addr)
 
 #define NVRAM_SIZE        0x2000
 
+static void fw_cfg_boot_set(void *opaque, const char *boot_device,
+                            Error **errp)
+{
+    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
+}
+
 static void ppc_prep_reset(void *opaque)
 {
     PowerPCCPU *cpu = opaque;

@@ -677,4 +687,221 @@ static void prep_machine_init(MachineClass *mc)
     mc->default_boot_order = "cad";
 }
 
+static int prep_set_cmos_checksum(DeviceState *dev, void *opaque)
+{
+    uint16_t checksum = *(uint16_t *)opaque;
+    ISADevice *rtc;
+
+    if (object_dynamic_cast(OBJECT(dev), "mc146818rtc")) {
+        rtc = ISA_DEVICE(dev);
+        rtc_set_memory(rtc, 0x2e, checksum & 0xff);
+        rtc_set_memory(rtc, 0x3e, checksum & 0xff);
+        rtc_set_memory(rtc, 0x2f, checksum >> 8);
+        rtc_set_memory(rtc, 0x3f, checksum >> 8);
+    }
+    return 0;
+}
+
+static void ibm_40p_init(MachineState *machine)
+{
+    CPUPPCState *env = NULL;
+    uint16_t cmos_checksum;
+    PowerPCCPU *cpu;
+    DeviceState *dev;
+    SysBusDevice *pcihost;
+    Nvram *m48t59 = NULL;
+    PCIBus *pci_bus;
+    ISABus *isa_bus;
+    void *fw_cfg;
+    int i;
+    uint32_t kernel_base = 0, initrd_base = 0;
+    long kernel_size = 0, initrd_size = 0;
+    char boot_device;
+
+    /* init CPU */

hw/ppc/prep.c static void prep_machine_init(MachineClass *mc) · line 727

Quoted 6 lines

hw/ppc/prep.c +6 -0

+    if (!machine->cpu_model) {
+        machine->cpu_model = "604";
+    }
+    cpu = cpu_ppc_init(machine->cpu_model);
+    if (cpu == NULL) {
+        fprintf(stderr, "Unable to find PowerPC CPU definition\n");

Please use error_report() rather than direct fprintf().

Quoted 5 lines

hw/ppc/prep.c +4 -0

+        exit(1);
+    }
+    env = &cpu->env;
+

hw/ppc/prep.c static void prep_machine_init(MachineClass *mc) · line 741

Quoted 10 lines

hw/ppc/prep.c +10 -0

+    if (env->flags & POWERPC_FLAG_RTC_CLK) {
+        /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */
+        cpu_ppc_tb_init(env, 7812500UL);
+    } else {
+        /* Set time-base frequency to 100 Mhz */
+        cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
+    }
+    qemu_register_reset(ppc_prep_reset, cpu);
+    if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
+        hw_error("Only 6xx bus is supported on PREP machine\n");

This is essentially a configuration error (selecting an unsuitable cpu for the platform. So it should be an error_report() + exit() rather than hw_error(). I'd also suggest moving up to immediately after the cpu initialization.

Quoted 146 lines

hw/ppc/prep.c +145 -0

+    }
+
+    /* PCI host */
+    dev = qdev_create(NULL, "raven-pcihost");
+    if (!bios_name) {
+        bios_name = BIOS_FILENAME;
+    }
+    qdev_prop_set_string(dev, "bios-name", bios_name);
+    qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
+    pcihost = SYS_BUS_DEVICE(dev);
+    object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL);
+    qdev_init_nofail(dev);
+    pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
+    if (pci_bus == NULL) {
+        fprintf(stderr, "Couldn't create PCI host controller.\n");
+        exit(1);
+    }
+
+    /* PCI -> ISA bridge */
+    dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(11, 0), "i82378"));
+    qdev_connect_gpio_out(dev, 0,
+                          cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
+    sysbus_connect_irq(pcihost, 0, qdev_get_gpio_in(dev, 15));
+    sysbus_connect_irq(pcihost, 1, qdev_get_gpio_in(dev, 13));
+    sysbus_connect_irq(pcihost, 2, qdev_get_gpio_in(dev, 15));
+    sysbus_connect_irq(pcihost, 3, qdev_get_gpio_in(dev, 13));
+    isa_bus = ISA_BUS(qdev_get_child_bus(dev, "isa.0"));
+
+    /* Memory controller */
+    dev = DEVICE(isa_create(isa_bus, "rs6000-mc"));
+    qdev_prop_set_uint32(dev, "ram-size", machine->ram_size);
+    qdev_init_nofail(dev);
+
+    /* initialize CMOS checksums */
+    cmos_checksum = 0x6aa9;
+    qbus_walk_children(BUS(isa_bus), prep_set_cmos_checksum, NULL, NULL, NULL,
+                       &cmos_checksum);
+
+    /* initialize audio subsystem */
+    audio_init();
+
+    /* add some more devices */
+    if (defaults_enabled()) {
+        isa_create_simple(isa_bus, "i8042");
+        m48t59 = NVRAM(isa_create_simple(isa_bus, "isa-m48t59"));
+
+        dev = DEVICE(isa_create(isa_bus, "cs4231a"));
+        qdev_prop_set_uint32(dev, "iobase", 0x830);
+        qdev_prop_set_uint32(dev, "irq", 10);
+        qdev_init_nofail(dev);
+
+        dev = DEVICE(isa_create(isa_bus, "pc87312"));
+        qdev_prop_set_uint32(dev, "config", 12);
+        qdev_init_nofail(dev);
+
+        dev = DEVICE(isa_create(isa_bus, "prep-systemio"));
+        qdev_prop_set_uint32(dev, "ibm-planar-id", 0xfc);
+        qdev_prop_set_uint32(dev, "equipment", 0xc0);
+        qdev_init_nofail(dev);
+
+        pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "lsi53c810");
+
+        /* XXX: s3-trio at PCI_DEVFN(2, 0) */
+        pci_vga_init(pci_bus);
+
+        for (i = 0; i < nb_nics; i++) {
+            pci_nic_init_nofail(&nd_table[i], pci_bus, "pcnet",
+                                i == 0 ? "3" : NULL);
+        }
+    }
+
+    /* Prepare firmware configuration for OpenBIOS */
+    fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
+
+    if (machine->kernel_filename) {
+        /* load kernel */
+        kernel_base = KERNEL_LOAD_ADDR;
+        kernel_size = load_image_targphys(machine->kernel_filename,
+                                          kernel_base,
+                                          machine->ram_size - kernel_base);
+        if (kernel_size < 0) {
+            error_report("could not load kernel '%s'",
+                          machine->kernel_filename);
+            exit(1);
+        }
+        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
+        fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
+        /* load initrd */
+        if (machine->initrd_filename) {
+            initrd_base = INITRD_LOAD_ADDR;
+            initrd_size = load_image_targphys(machine->initrd_filename,
+                                              initrd_base,
+                                              machine->ram_size - initrd_base);
+            if (initrd_size < 0) {
+                error_report("could not load initial ram disk '%s'",
+                             machine->initrd_filename);
+                exit(1);
+            }
+            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
+            fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
+        }
+        if (machine->kernel_cmdline && *machine->kernel_cmdline) {
+            fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
+            pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
+                             machine->kernel_cmdline);
+            fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA,
+                              machine->kernel_cmdline);
+            fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
+                           strlen(machine->kernel_cmdline) + 1);
+        }
+        boot_device = 'm';
+    } else {
+        boot_device = machine->boot_order[0];
+    }
+
+    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
+    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_PREP);
+
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
+
+    fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
+    if (kvm_enabled()) {
+#ifdef CONFIG_KVM
+        uint8_t *hypercall;
+
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq());
+        hypercall = g_malloc(16);
+        kvmppc_get_hypercall(env, hypercall, 16);
+        fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
+#endif
+    } else {
+        fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, NANOSECONDS_PER_SECOND);
+    }
+    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, boot_device);
+    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
+
+    /* Prepare firmware configuration for Open Hack'Ware */
+    if (m48t59) {
+        PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", ram_size,
+                             boot_device,
+                             kernel_base, kernel_size,

hw/ppc/prep.c static void prep_machine_init(MachineClass *mc) · line 891

Quoted 5 lines

hw/ppc/prep.c +5 -0

+                             machine->kernel_cmdline,
+                             initrd_base, initrd_size,
+                             /* XXX: need an option to load a NVRAM image */
+                             0,
+                             graphic_width, graphic_height, graphic_depth);

Doesn't this mean the system can't possibly boot without the m48t59? In which case shouldn't it be created even with -nodefaults?

Quoted 17 lines

hw/ppc/prep.c +15 -0

+    }
+}
+
+static void ibm_40p_machine_init(MachineClass *mc)
+{
+    mc->desc = "IBM RS/6000 7020 (40p)",
+    mc->init = ibm_40p_init;
+    mc->max_cpus = 1;
+    mc->pci_allow_0_address = true;
+    mc->default_ram_size = 128 * M_BYTE;
+    mc->block_default_type = IF_SCSI;
+    mc->default_boot_order = "c";
+}
+
+DEFINE_MACHINE("40p", ibm_40p_machine_init)
 DEFINE_MACHINE("prep", prep_machine_init)