Patch "ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards." has been added to the 4.8-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.
to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ath9k-really-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
and it can be found in the queue-4.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
79e57dd113d307a6c74773b8aaecf5442068988aMon Sep 17 00:00:00 2001
From: "Vittorio Gambaletta (VittGam)" <[email protected]>
Date: Wed, 9 Nov 2016 03:40:56 +0200
Subject: ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.
From: Vittorio Gambaletta (VittGam) <[email protected]>
commit 79e57dd113d307a6c74773b8aaecf5442068988a upstream.
The active_high LED of my Wistron DNMA-92 is still being recognized as active_low on 4.7.6 mainline. When I was preparing my former commit 0f9edcdd88a9 ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.") to fix that I must have somehow messed up with testing, because I tested the final version of that patch before sending it, and it was apparently working; but now it is not working on 4.7.6 mainline.
I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the PCI_VDEVICE section for 0x0029; but then I moved the former below the latter after seeing how 0x002A sections were sorted in the file.
This turned out to be wrong: if a generic PCI_VDEVICE entry (that has both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will match first and will be used.
With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6.
While I'm at it, let's fix 0x002A too by also moving its generic definition below its specific ones.
--- drivers/net/wireless/ath/ath9k/pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/pci.c +5 -2
@@ -26,7 +26,6 @@ static const struct pci_device_id ath_pc { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ - { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ #ifdef CONFIG_ATH9K_PCOEM/* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
@@ -37,7 +36,7 @@ static const struct pci_device_id ath_pc .driver_data = ATH9K_PCI_LED_ACT_HI },#endif - { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ #ifdef CONFIG_ATH9K_PCOEM { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
@@ -85,7 +84,11 @@ static const struct pci_device_id ath_pc 0x10CF, /* Fujitsu */ 0x1536), .driver_data = ATH9K_PCI_D3_L1_WAR }, +#endif + { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + +#ifdef CONFIG_ATH9K_PCOEM /* AR9285 card for Asus */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, 0x002B,
Patches currently in stable-queue which might be from [email protected] are
queue-4.8/ath9k-really-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch