davinci_all_defconfig patches for LEGO MINDSTORMS EV3
cover davinci_all_defconfig patches for LEGO MINDSTORMS EV3
Resending the patches that were missing my Signed-off-by:
David Lechner (3):
ARM: davinci_all_defconfig: enable DA8xx pinconf
ARM: davinci_all_defconfig: Enable PWM modules
ARM: davinci_all_defconfig: enable iio and ADS7950
arch/arm/configs/davinci_all_defconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
Signature · 1 line
2.7.4
PATCH RESEND 1/3 ARM: davinci_all_defconfig: enable DA8xx pinconf
This enables the DA8xx pinconf driver by default. It is needed by LEGO MINDSTORMS EV3.
--- arch/arm/configs/davinci_all_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/davinci_all_defconfig +1 -0
@@ -114,6 +114,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_SPI=y CONFIG_SPI_DAVINCI=m +CONFIG_PINCTRL_DA850_PUPD=m CONFIG_PINCTRL_SINGLE=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y
Signature · 1 line
2.7.4
PATCH RESEND 2/3 ARM: davinci_all_defconfig: Enable PWM modules
In reply to David LechnerThis enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO MINDSTORMS EV3.
--- arch/arm/configs/davinci_all_defconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/configs/davinci_all_defconfig +3 -0
@@ -200,6 +200,9 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_PWM=y +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y
Signature · 1 line
2.7.4
PATCH RESEND 3/3 ARM: davinci_all_defconfig: enable iio and ADS7950
In reply to David LechnerThis enables the iio subsystem and the TI ADS7950 driver. This is used by LEGO MINDSTORMS EV3, which has an ADS7957 chip.
--- arch/arm/configs/davinci_all_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm/configs/davinci_all_defconfig +7 -0
@@ -200,6 +200,13 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_TI_ADS7950=m +CONFIG_IIO_HRTIMER_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_PWM=y CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m
Signature · 1 line
2.7.4
Re: [RESEND 3/3] ARM: davinci_all_defconfig: enable iio and ADS7950
Quoted 13 lines · David Lechner
This enables the iio subsystem and the TI ADS7950 driver. This is used by LEGO MINDSTORMS EV3, which has an ADS7957 chip.
Signed-off-by David Lechner <[email protected]>--- arch/arm/configs/davinci_all_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm/configs/davinci_all_defconfig +0
-0
arch/arm/configs/davinci_all_defconfig CONFIG_TI_EDMA=y · line 209
Quoted 10 lines
arch/arm/configs/davinci_all_defconfig +7
-0@@ -200,6 +200,13 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_TI_ADS7950=m +CONFIG_IIO_HRTIMER_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m
Hmm, there are some other comments I gave on the previous version I don't see addressed. Can you please fix those or respond to those comments?
Thanks,
Sekhar
Sekhar Nori
AppliedRe: [RESEND 1/3] ARM: davinci_all_defconfig: enable DA8xx pinconf
In reply to David LechnerQuoted 4 lines · David Lechner
This enables the DA8xx pinconf driver by default. It is needed by LEGO MINDSTORMS EV3.
Signed-off-by David Lechner <[email protected]>
Applied to v4.11/defconfig
Thanks,
Sekhar
Sekhar Nori
AppliedRe: [RESEND 2/3] ARM: davinci_all_defconfig: Enable PWM modules
In reply to David LechnerQuoted 4 lines · David Lechner
This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO MINDSTORMS EV3.
Signed-off-by David Lechner <[email protected]>
Applied to v4.11/defconfig
Thanks,
Sekhar
Re: [RESEND 3/3] ARM: davinci_all_defconfig: enable iio and ADS7950
In reply to Sekhar NoriQuoted 19 lines · Sekhar Nori
Quoted 18 lines · David Lechner
This enables the iio subsystem and the TI ADS7950 driver. This is used by LEGO MINDSTORMS EV3, which has an ADS7957 chip.
Signed-off-by David Lechner <[email protected]>--- arch/arm/configs/davinci_all_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm/configs/davinci_all_defconfig +2
-0@@ -200,6 +200,13 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER_CB=m
Quoted 8 lines
arch/arm/configs/davinci_all_defconfig CONFIG_TI_EDMA=y · line 209
Quoted 5 lines
arch/arm/configs/davinci_all_defconfig +5
-0+CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_TI_ADS7950=m +CONFIG_IIO_HRTIMER_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=mHmm, there are some other comments I gave on the previous version I don't see addressed. Can you please fix those or respond to those comments?
Oops, I missed the other comments. I will fix it.
Quoted 4 lines
Thanks,
Sekhar