Patch "regulator: tps65086: Fix 25mV ranges for BUCK regulators" has been added to the 4.9-stable tree
Subsystems (4)
This is a note to let you know that I've just added the patch titled
regulator: tps65086: Fix 25mV ranges for BUCK regulators
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
regulator-tps65086-fix-25mv-ranges-for-buck-regulators.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
d8ca5bd158f738c4fa6974ee388c381f64db7905Mon Sep 17 00:00:00 2001
From: "Andrew F. Davis" <[email protected]>
Date: Thu, 1 Dec 2016 10:44:16 -0600
Subject: regulator: tps65086: Fix 25mV ranges for BUCK regulators
From: Andrew F. Davis <[email protected]>
commit d8ca5bd158f738c4fa6974ee388c381f64db7905 upstream.
The BUCK regulators 3, 4, and 5 also have a 10mV step mode, adjust the tables and logic to reflect the data-sheet for these regulators.
--- Documentation/devicetree/bindings/mfd/tps65086.txt | 2 drivers/regulator/tps65086-regulator.c | 54 ++++++++++----------- 2 files changed, 29 insertions(+), 27 deletions(-)
Documentation/devicetree/bindings/mfd/tps65086.txt +1 -1
@@ -23,7 +23,7 @@ Required properties: defined below. Optional regulator properties: - - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this + - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this if the regulator is factory set with a 25mv step voltage mapping. - ti,regulator-decay : This is applicable for buck[1-6], set this if
drivers/regulator/tps65086-regulator.c +28 -26
103 lines not on this page · raw message
Patches currently in stable-queue which might be from [email protected] are
queue-4.9/regulator-tps65086-fix-25mv-ranges-for-buck-regulators.patch