Skip to contentSkip to conversation

IPv6-UDP 0x0000 checksum

DISCUSSION Johannes Berg 4 participants 9 messages Jan 26, 2017 5 messages not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

It looks like right now we may have a hardware bug and accept 0x0000 as valid, when the outcome of the calculation is 0xffff.

What do you think we should do about this?

We could ignore the issue entirely, since 0 wasn't ever supposed to be sent anyway - but then we don't drop frames that we should drop. I didn't manage to find the code in the IPv6/UDP stack that even does that, but I assume it's there somewhere.

Alternatively, we could parse the packet to find the checksum inside, and if it's 0 then don't report CHECKSUM_UNNECESSARY, but that seems rather expensive/difficult due to the IPv6 variable header and all that. If we wanted to go this route, are there any helper functions for this?

Unfortunately, in the current devices, we neither have a complete indication that the packet was even UDP-IPv6, nor do we have the raw csum or anything like that. I think they're adding that to the next hardware spin, but we probably need to address this issue now.

johannes

Acked-by Maciej Żenczykowski
#1 lore raw
Quoted 18 lines · Johannes Berg

Hi,

It looks like right now we may have a hardware bug and accept 0x0000 as valid, when the outcome of the calculation is 0xffff.

What do you think we should do about this?

We could ignore the issue entirely, since 0 wasn't ever supposed to be sent anyway - but then we don't drop frames that we should drop. I didn't manage to find the code in the IPv6/UDP stack that even does that, but I assume it's there somewhere.

Alternatively, we could parse the packet to find the checksum inside, and if it's 0 then don't report CHECKSUM_UNNECESSARY, but that seems rather expensive/difficult due to the IPv6 variable header and all that. If we wanted to go this route, are there any helper functions for this?

Quoted 6 lines

Unfortunately, in the current devices, we neither have a complete indication that the packet was even UDP-IPv6, nor do we have the raw csum or anything like that. I think they're adding that to the next hardware spin, but we probably need to address this issue now.

johannes

Hi Johannes

I am afraid information is missing.

Is this a xmit or rcv problem ?

I recently fixed an issue, could this be this ?

commit 4f2e4ad56a65f3b7d64c258e373cb71e8d2499f4

Author: Eric Dumazet <[email protected]>
Date:   Sat Oct 29 11:02:36 2016 -0700

net: mangle zero checksum in skb_checksum_help()

Sending zero checksum is ok for TCP, but not for UDP.

UDPv6 receiver should by default drop a frame with a 0 checksum, and UDPv4 would not verify the checksum and might accept a corrupted packet.

Simply replace such checksum by 0xffff, regardless of transport.

This error was caught on SIT tunnels, but seems generic.

net/core/dev.c +1 -1
index 820bac239738eb021354ac95ca5bbdff1840cb8e..eaad4c28069ff523ac784bf2dffd0acff82341a0 100644
@@ -2484,7 +2484,7 @@ int skb_checksum_help(struct sk_buff *skb)
                        goto out;
        }
 
-       *(__sum16 *)(skb->data + offset) = csum_fold(csum);
+       *(__sum16 *)(skb->data + offset) = csum_fold(csum) ?: CSUM_MANGLED_0;
 out_set_summed:
        skb->ip_summed = CHECKSUM_NONE;
 out:
#2 lore raw
Quoted 24 lines · Eric Dumazet
Quoted 23 lines · Johannes Berg

Hi,

It looks like right now we may have a hardware bug and accept 0x0000 as
valid, when the outcome of the calculation is 0xffff.

What do you think we should do about this?

We could ignore the issue entirely, since 0 wasn't ever supposed to be
sent anyway - but then we don't drop frames that we should drop. I didn't manage to find the code in the IPv6/UDP stack that even does that, but I assume it's there somewhere.

Alternatively, we could parse the packet to find the checksum inside,
and if it's 0 then don't report CHECKSUM_UNNECESSARY, but that seems
rather expensive/difficult due to the IPv6 variable header and all that. If we wanted to go this route, are there any helper functions for
this?

Quoted 7 lines
Quoted 5 lines

Unfortunately, in the current devices, we neither have a complete indication that the packet was even UDP-IPv6, nor do we have the raw
csum or anything like that. I think they're adding that to the next hardware spin, but we probably need to address this issue now.

Is this a xmit or rcv problem ?

Oops, sorry - receive. We can only indicate "CHECKSUM_UNNECESSARY", nothing more advanced right now, but right now we'd indicate that if the packet had 0x0000 in the checksum field, but should've had 0xffff.

On TX I believe we actually do in HW exactly what your patch just did.

johannes

#4 lore raw
In reply to a message not in the archive
Quoted 5 lines · Johannes Berg

Oops, sorry - receive. We can only indicate "CHECKSUM_UNNECESSARY", nothing more advanced right now, but right now we'd indicate that if the packet had 0x0000 in the checksum field, but should've had 0xffff.

On TX I believe we actually do in HW exactly what your patch just did.

Can you describe the visible effects of this problem ?

Is that because of a conversion we might do later to CHECKSUM_COMPLETE ?

#6 lore raw
In reply to a message not in the archive
Quoted 8 lines · Eric Dumazet
Quoted 6 lines · Johannes Berg

Oops, sorry - receive. We can only indicate "CHECKSUM_UNNECESSARY", nothing more advanced right now, but right now we'd indicate that if
the packet had 0x0000 in the checksum field, but should've had 0xffff.

Quoted 7 lines
Quoted 2 lines

On TX I believe we actually do in HW exactly what your patch just did.

Can you describe the visible effects of this problem ?

Is that because of a conversion we might do later to CHECKSUM_COMPLETE ?

Unfortunately, I haven't been able to actually test this yet. I also didn't find the code that would drop frames with CSUM 0 either, so I'm thinking - for now - that if all the csum handling is skipped, dropping 0 csum frames would also be, and then we'd accept a frame we should actually have dropped.

I'll go test this I guess :)

Any pointers to where 0 csum frames are dropped?

johannes

#8 lore raw
In reply to a message not in the archive
Quoted 9 lines · Johannes Berg

Unfortunately, I haven't been able to actually test this yet. I also didn't find the code that would drop frames with CSUM 0 either, so I'm thinking - for now - that if all the csum handling is skipped, dropping 0 csum frames would also be, and then we'd accept a frame we should actually have dropped.

I'll go test this I guess :)

Any pointers to where 0 csum frames are dropped?

Probably in udp6_csum_init()

#10 lore raw
In reply to a message not in the archive
Quoted 8 lines · Eric Dumazet
Quoted 6 lines · Johannes Berg

Unfortunately, I haven't been able to actually test this yet. I also didn't find the code that would drop frames with CSUM 0 either, so I'm thinking - for now - that if all the csum handling is skipped, dropping 0 csum frames would also be, and then we'd accept a frame we should actually have dropped.

Quoted 5 lines
Quoted 3 lines

I'll go test this I guess :)

Any pointers to where 0 csum frames are dropped?

Probably in udp6_csum_init()

vi +804 net/ipv6/udp.c

                if (!uh->check && !udp_sk(sk)->no_check6_rx) {
                        udp6_csum_zero_error(skb);
                        goto csum_error;
                }
#13 lore raw
In reply to Eric Dumazet
Quoted 11 lines · Eric Dumazet
Quoted 9 lines · Johannes Berg

Unfortunately, I haven't been able to actually test this yet. I also
didn't find the code that would drop frames with CSUM 0 either, so I'm
thinking - for now - that if all the csum handling is skipped, dropping
0 csum frames would also be, and then we'd accept a frame we should actually have dropped.

Quoted 5 lines
Quoted 3 lines

I'll go test this I guess :)

Any pointers to where 0 csum frames are dropped?

Probably in udp6_csum_init()

Well, now that I see that, I see that they're actually valid in some circumstances. Oops. :)

Will need to revisit, and check how we set no_check6_rx, etc.

johannes

#12 lore raw
In reply to a message not in the archive
Quoted 5 lines · Eric Dumazet
                if (!uh->check && !udp_sk(sk)->no_check6_rx) {
                        udp6_csum_zero_error(skb);
                        goto csum_error;
                }

Yeah, I'd found no_check6_rx already, was still trying to figure out this one :)

Looks like we actually check uh->check regardless of anything the driver said (CHECKSUM_UNNECESSARY, or whatever), so we should be fine even with the hardware tagging it as good in this case.

johannes