i40e/i40evf updates
Subsystems (2)
cover i40e/i40evf updates
Alexander Duyck adds support for mapping pages with DMA attributes.
Bimmy Pujari changes version from 1.6.27 to 2.1.7.
Filip Sadowski adds code to clarify steps in MAC/VLAN filters initialization routine.
Lihong Yang adds code to fix ethtool to get EEPROM data from X722 interface and fixes RSS queues only operating on PF0.
Mitch Williams adds code to allow untrusted VFs to have more filters.
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 5 ++++ drivers/net/ethernet/intel/i40e/i40e_main.c | 25 +++++++---------- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 31 ++++++++++++++++++---- drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +++ drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 31 ++++++++++++++++++---- drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 3 +++ drivers/net/ethernet/intel/i40evf/i40evf_main.c | 6 ++--- 8 files changed, 79 insertions(+), 33 deletions(-)
Signature · 1 line
2.4.11
PATCH 1/6 i40e: fix ethtool to get EEPROM data from X722 interface
From: Lihong Yang <[email protected]>
Currently ethtool -e will error out with a X722 interface as its EEPROM has a scope limit at offset 0x5B9FFF. This patch fixes the issue by setting the EEPROM length to the scope limit to avoid NVM read failure beyond that.
---
Testing Hints: ethtool -e X722-interface.
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_ethtool.c +5 -0
@@ -1165,6 +1165,11 @@ static int i40e_get_eeprom_len(struct net_device *netdev)struct i40e_hw *hw = &np->vsi->back->hw;u32 val; +#define X722_EEPROM_SCOPE_LIMIT 0x5B9FFF +if (hw->mac.type ==I40E_MAC_X722 ) { + val =X722_EEPROM_SCOPE_LIMIT +1 ; +return val; + } val = (rd32 (hw,I40E_GLPCI_LBARCTRL ) &I40E_GLPCI_LBARCTRL_FL_SIZE_MASK ) >>I40E_GLPCI_LBARCTRL_FL_SIZE_SHIFT ;
Signature · 1 line
2.4.11
Bowers
PATCH 1/6 i40e: fix ethtool to get EEPROM data from X722 interface
Quoted 15 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [next PATCH S59 1/6] i40e: fix ethtool to get EEPROM data from X722 interfaceFrom: Lihong Yang <[email protected]>
Currently ethtool -e will error out with a X722 interface as its EEPROM has a scope limit at offset
0x5B9FFF.
This patch fixes the issue by setting the EEPROM length to the scope limit to avoid NVM read failure beyond that.
Quoted 7 lines
Signed-off-by Lihong Yang <[email protected]>Change-ID I0b7d4dd6c7f2a57cace438af5dffa0f44c229372---
Testing Hints: ethtool -e X722-interface.drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 5 +++++ 1 file changed, 5 insertions(+)
PATCH 2/6 i40e: fix RSS queues only operating on PF0
In reply to Bimmy PujariFrom: Lihong Yang <[email protected]>
This patch fixes the issue that RSS offloading only works on PF0 by using the direct register writing of the hash keys for the VFs instead of using the admin queue command to do so.
---
Testing Hints: follow the steps in the HSD.
drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++-------- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 6 ++---- 2 files changed, 5 insertions(+), 12 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +3 -8
@@ -8604,13 +8604,10 @@ static int i40e_config_rss_reg(struct i40e_vsi *vsi, const u8 *seed,if (vsi->type ==I40E_VSI_MAIN ) {for (i =0 ; i <=I40E_PFQF_HKEY_MAX_INDEX ; i++) -i40e_write_rx_ctl (hw,I40E_PFQF_HKEY (i), - seed_dw[i]); +wr32 (hw,I40E_PFQF_HKEY (i), seed_dw[i]); }else if (vsi->type ==I40E_VSI_SRIOV ) {for (i =0 ; i <=I40E_VFQF_HKEY1_MAX_INDEX ; i++) -i40e_write_rx_ctl (hw, -I40E_VFQF_HKEY1 (i, vf_id), - seed_dw[i]); +wr32 (hw,I40E_VFQF_HKEY1 (i, vf_id), seed_dw[i]); }else {dev_err (&pf->pdev->dev,"Cannot set RSS seed - invalid VSI type\n" ); }
@@ -8628,9 +8625,7 @@ static int i40e_config_rss_reg(struct i40e_vsi *vsi, const u8 *seed,if (lut_size !=I40E_VF_HLUT_ARRAY_SIZE )return -EINVAL ;for (i =0 ; i <=I40E_VFQF_HLUT_MAX_INDEX ; i++) -i40e_write_rx_ctl (hw, -I40E_VFQF_HLUT1 (i, vf_id), - lut_dw[i]); +wr32 (hw,I40E_VFQF_HLUT1 (i, vf_id), lut_dw[i]); }else {dev_err (&pf->pdev->dev,"Cannot set RSS LUT - invalid VSI type\n" ); }
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +2 -4
@@ -706,10 +706,8 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type) "Could not allocate VF broadcast filter\n"); }spin_unlock_bh (&vsi->mac_filter_hash_lock); -i40e_write_rx_ctl (&pf->hw,I40E_VFQF_HENA1 (0 , vf->vf_id), - (u32 )hena); -i40e_write_rx_ctl (&pf->hw,I40E_VFQF_HENA1 (1 , vf->vf_id), - (u32)(hena >>32 )); +wr32 (&pf->hw,I40E_VFQF_HENA1 (0 , vf->vf_id), (u32 )hena); +wr32 (&pf->hw,I40E_VFQF_HENA1 (1 , vf->vf_id), (u32)(hena >>32 )); }/* program mac filter */
Signature · 1 line
2.4.11
Bowers
PATCH 2/6 i40e: fix RSS queues only operating on PF0
Quoted 14 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [next PATCH S59 2/6] i40e: fix RSS queues only operating on PF0From: Lihong Yang <[email protected]>
This patch fixes the issue that RSS offloading only works on PF0 by using the direct register writing of the hash keys for the VFs instead of using the admin queue command to do so.
Quoted 8 lines
Signed-off-by Lihong Yang <[email protected]>Change-ID Ia02cda7dbaa23def342e8786097a2c03db6f580b---
Testing Hints: follow the steps in the HSD.drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++-------- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 6 ++---- 2 files changed, 5 insertions(+), 12 deletions(-)
PATCH 3/6 i40e: Clarify steps in MAC/VLAN filters initialization routine
In reply to Bimmy PujariFrom: Filip Sadowski <[email protected]>
This patch clarifies the reason for removal of automatically firmware-generated filter and explicit addition of filter which accepts frames with any VLAN id.
---
Testing-hints:
Do code inspection to see if modified comment is there.
drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +4 -4
@@ -9773,10 +9773,10 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)if (vsi->type ==I40E_VSI_MAIN ) {SET_NETDEV_DEV (netdev, &pf->pdev->dev);ether_addr_copy (mac_addr, hw->mac.perm_addr); -/* The following steps are necessary to prevent reception -* of tagged packets - some older NVM configurations load a -* default a MAC-VLAN filter that accepts any tagged packet -* which must be replaced by a normal filter. +/* The following steps are necessary to properly keep track of +* MAC-VLAN filters loaded into firmware - first we remove +* filter that is automatically generated by firmware and then +* add new filter both to the driver hash table and firmware. */ i40e_rm_default_mac_filter (vsi, mac_addr);spin_lock_bh (&vsi->mac_filter_hash_lock);
Signature · 1 line
2.4.11
Bowers
PATCH 3/6 i40e: Clarify steps in MAC/VLAN filters initialization routine
Quoted 15 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Cc: Sadowski, Filip <[email protected]>
Subject: [Intel-wired-lan] [next PATCH S59 3/6] i40e: Clarify steps in MAC/VLAN filters initialization routineFrom: Filip Sadowski <[email protected]>
This patch clarifies the reason for removal of automatically firmware- generated filter and explicit addition of filter which accepts frames with any VLAN id.
Quoted 8 lines
Signed-off-by Filip Sadowski <[email protected]>Change-ID Iabf180b6d61c4d8a36d3bcf8457c377a6f2aca0e---
Testing-hints:
Do code inspection to see if modified comment is there.drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
PATCH 4/6 i40e/i40evf: Add support for mapping pages with DMA attributes
In reply to Bimmy PujariFrom: Alexander Duyck <[email protected]>
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc.
---
Testing Hints: Changes would only be visible with SPARC platforms or
systems with swiotlb=force enabled. Even then the actual effect should be minimal. Mainly we just need to verify that on kernels 4.10 and newer we are still able to receive traffic without any issues.
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 31 ++++++++++++++++++++++----- drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +++ drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 31 ++++++++++++++++++++++----- drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 3 +++ 4 files changed, 58 insertions(+), 10 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_txrx.c +26 -5
@@ -1105,7 +1105,6 @@ int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)**/ void i40e_clean_rx_ring (struct i40e_ring *rx_ring) { -struct device *dev = rx_ring->dev;unsigned long bi_size;u16 i;struct bpf_prog *old_prog;
@@ -1126,7 +1125,20 @@ void i40e_clean_rx_ring(struct i40e_ring *rx_ring)if (!rx_bi->page)continue ; -dma_unmap_page (dev, rx_bi->dma,PAGE_SIZE ,DMA_FROM_DEVICE ); +/* Invalidate cache lines that may have been written to by +* device so that we avoid corrupting memory. +*/ +dma_sync_single_range_for_cpu (rx_ring->dev, + rx_bi->dma, + rx_bi->page_offset, +I40E_RXBUFFER_2048 , +DMA_FROM_DEVICE ); + +/* free resources associated with mapping */ +dma_unmap_page_attrs (rx_ring->dev, rx_bi->dma, +PAGE_SIZE , +DMA_FROM_DEVICE , +I40E_RX_DMA_ATTR );__free_pages (rx_bi->page,0 ); rx_bi->page =NULL ;
@@ -1260,7 +1272,10 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring, }/* map page for use */ - dma =dma_map_page (rx_ring->dev, page,0 ,PAGE_SIZE ,DMA_FROM_DEVICE ); + dma =dma_map_page_attrs (rx_ring->dev, page,0 , +PAGE_SIZE , +DMA_FROM_DEVICE , +I40E_RX_DMA_ATTR );/* if mapping failed free memory back to system since * there isn't much point in holding memory we can't use
@@ -1369,6 +1384,12 @@ bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)if (!i40e_alloc_mapped_page (rx_ring, bi)) goto no_buffers; +/* sync the buffer for use by the device */ +dma_sync_single_range_for_device (rx_ring->dev, bi->dma, + bi->page_offset, +I40E_RXBUFFER_2048 , +DMA_FROM_DEVICE ); +/* Refresh the desc even if buffer_addrs didn't change * because each write-back erases this info. */
@@ -2011,8 +2032,8 @@ struct sk_buff *i40e_fetch_rx_buffer(struct i40e_ring *rx_ring, rx_ring->rx_stats.page_reuse_count++; }else {/* we are not reusing the buffer so unmap it */ -dma_unmap_page (rx_ring->dev, rx_buffer->dma,PAGE_SIZE , -DMA_FROM_DEVICE ); +dma_unmap_page_attrs (rx_ring->dev, rx_buffer->dma,PAGE_SIZE , +DMA_FROM_DEVICE ,I40E_RX_DMA_ATTR ); }/* clear contents of buffer_info */
drivers/net/ethernet/intel/i40e/i40e_txrx.h +3 -0
@@ -133,6 +133,9 @@ enum i40e_dyn_idx_t {#define I40E_RX_HDR_SIZE I40E_RXBUFFER_256#define i40e_rx_desc i40e_32byte_rx_desc +#define I40E_RX_DMA_ATTR \ + (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING) +/** * i40e_test_staterr - tests bits in Rx descriptor status and error fields * @rx_desc: pointer to receive descriptor (in le64 format)
drivers/net/ethernet/intel/i40evf/i40e_txrx.c +26 -5
@@ -493,7 +493,6 @@ int i40evf_setup_tx_descriptors(struct i40e_ring *tx_ring)**/ void i40evf_clean_rx_ring (struct i40e_ring *rx_ring) { -struct device *dev = rx_ring->dev;unsigned long bi_size;u16 i;
@@ -513,7 +512,20 @@ void i40evf_clean_rx_ring(struct i40e_ring *rx_ring)if (!rx_bi->page)continue ; -dma_unmap_page (dev, rx_bi->dma,PAGE_SIZE ,DMA_FROM_DEVICE ); +/* Invalidate cache lines that may have been written to by +* device so that we avoid corrupting memory. +*/ +dma_sync_single_range_for_cpu (rx_ring->dev, + rx_bi->dma, + rx_bi->page_offset, +I40E_RXBUFFER_2048 , +DMA_FROM_DEVICE ); + +/* free resources associated with mapping */ +dma_unmap_page_attrs (rx_ring->dev, rx_bi->dma, +PAGE_SIZE , +DMA_FROM_DEVICE , +I40E_RX_DMA_ATTR );__free_pages (rx_bi->page,0 ); rx_bi->page =NULL ;
@@ -642,7 +654,10 @@ static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring, }/* map page for use */ - dma =dma_map_page (rx_ring->dev, page,0 ,PAGE_SIZE ,DMA_FROM_DEVICE ); + dma =dma_map_page_attrs (rx_ring->dev, page,0 , +PAGE_SIZE , +DMA_FROM_DEVICE , +I40E_RX_DMA_ATTR );/* if mapping failed free memory back to system since * there isn't much point in holding memory we can't use
@@ -702,6 +717,12 @@ bool i40evf_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)if (!i40e_alloc_mapped_page (rx_ring, bi)) goto no_buffers; +/* sync the buffer for use by the device */ +dma_sync_single_range_for_device (rx_ring->dev, bi->dma, + bi->page_offset, +I40E_RXBUFFER_2048 , +DMA_FROM_DEVICE ); +/* Refresh the desc even if buffer_addrs didn't change * because each write-back erases this info. */
@@ -1158,8 +1179,8 @@ struct sk_buff *i40evf_fetch_rx_buffer(struct i40e_ring *rx_ring, rx_ring->rx_stats.page_reuse_count++; }else {/* we are not reusing the buffer so unmap it */ -dma_unmap_page (rx_ring->dev, rx_buffer->dma,PAGE_SIZE , -DMA_FROM_DEVICE ); +dma_unmap_page_attrs (rx_ring->dev, rx_buffer->dma,PAGE_SIZE , +DMA_FROM_DEVICE ,I40E_RX_DMA_ATTR ); }/* clear contents of buffer_info */
drivers/net/ethernet/intel/i40evf/i40e_txrx.h +3 -0
@@ -120,6 +120,9 @@ enum i40e_dyn_idx_t {#define I40E_RX_HDR_SIZE I40E_RXBUFFER_256#define i40e_rx_desc i40e_32byte_rx_desc +#define I40E_RX_DMA_ATTR \ + (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING) +/** * i40e_test_staterr - tests bits in Rx descriptor status and error fields * @rx_desc: pointer to receive descriptor (in le64 format)
Signature · 1 line
2.4.11
Bowers
PATCH 4/6 i40e/i40evf: Add support for mapping pages with DMA attributes
Quoted 28 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [next PATCH S59 4/6] i40e/i40evf: Add support for mapping pages with DMA attributesFrom: Alexander Duyck <[email protected]>
This patch adds support for
DMA_ATTR_SKIP_CPU_SYNCandDMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc.Signed-off-by Alexander Duyck <[email protected]>Change-ID If176824e8231c5b24b8a5d55b339a6026738fc75---
Testing Hints: Changes would only be visible with SPARC platforms or
systems with swiotlb=force enabled. Even then the actual effect should be minimal. Mainly we just need to verify that on kernels 4.10 and newer we are still able to receive traffic without any issues.
Quoted 7 lines
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 31 ++++++++++++++++++++++----- drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +++ drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 31 ++++++++++++++++++++++----- drivers/net/ethernet/intel/i40evf/i40e_txrx.h | 3 +++ 4 files changed, 58 insertions(+), 10 deletions(-)
PATCH 5/6 i40e: Allow untrusted VFs to have more filters
In reply to Bimmy PujariFrom: Mitch Williams <[email protected]>
Our original filter limit of 8 was based on behavior that we saw from Linux VMs. Now we're running Other Operating Systems under KVM and we see that they commonly use more MAC filters. Since it seems weird to require people to enable trusted VFs just to boot their OS, bump the number of filters allowed by default.
---
Testing Hints : Boot Windows Server 2016 in a VM and make sure the host doesn't complain about untrusted VFs.
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +1 -1
@@ -2189,7 +2189,7 @@ static int i40e_vc_get_stats_msg(struct i40e_vf *vf, u8 *msg, u16 msglen) }/* If the VF is not trusted restrict the number of MAC/VLAN it can program */ -#define I40E_VC_MAX_MAC_ADDR_PER_VF 8 +#define I40E_VC_MAX_MAC_ADDR_PER_VF 12#define I40E_VC_MAX_VLAN_PER_VF 8/**
Signature · 1 line
2.4.11
Bowers
PATCH 5/6 i40e: Allow untrusted VFs to have more filters
Quoted 16 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [next PATCH S59 5/6] i40e: Allow untrusted VFs to have more filtersFrom: Mitch Williams <[email protected]>
Our original filter limit of 8 was based on behavior that we saw from Linux VMs. Now we're running Other Operating Systems under KVM and we see that they commonly use more MAC filters. Since it seems weird to require people to enable trusted VFs just to boot their OS, bump the number of filters allowed by default.
Quoted 8 lines
Signed-off-by Mitch Williams <[email protected]>Change-ID I76b2dcb2ad6017e39231ad3096c3fb6f065eef5e---
Testing Hints : Boot Windows Server 2016 in a VM and make sure the host doesn't complain about untrusted VFs.drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
PATCH 6/6 i40e/i40evf: Change version from 1.6.27 to 2.1.7
In reply to Bimmy Pujari--- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++--- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +3 -3
@@ -40,9 +40,9 @@ static const char i40e_driver_string[] =#define DRV_KERN "-k" -#define DRV_VERSION_MAJOR 1 -#define DRV_VERSION_MINOR 6 -#define DRV_VERSION_BUILD 27 +#define DRV_VERSION_MAJOR 2 +#define DRV_VERSION_MINOR 1 +#define DRV_VERSION_BUILD 7#define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \ __stringify(DRV_VERSION_MINOR) "." \ __stringify(DRV_VERSION_BUILD) DRV_KERN
drivers/net/ethernet/intel/i40evf/i40evf_main.c +3 -3
@@ -37,9 +37,9 @@ static const char i40evf_driver_string[] =#define DRV_KERN "-k" -#define DRV_VERSION_MAJOR 1 -#define DRV_VERSION_MINOR 6 -#define DRV_VERSION_BUILD 27 +#define DRV_VERSION_MAJOR 2 +#define DRV_VERSION_MINOR 1 +#define DRV_VERSION_BUILD 7#define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \ __stringify(DRV_VERSION_MINOR) "." \ __stringify(DRV_VERSION_BUILD) \
Signature · 1 line
2.4.11
Bowers
PATCH 6/6 i40e/i40evf: Change version from 1.6.27 to 2.1.7
Quoted 8 lines
-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Bimmy Pujari
Sent: Monday, January 30, 2017 12:30 PM
To: intel-wired-lan at lists.osuosl.org
Subject: [Intel-wired-lan] [next PATCH S59 6/6] i40e/i40evf: Change version from 1.6.27 to 2.1.7
Quoted 5 lines
Signed-off-by Bimmy Pujari <[email protected]>--- drivers/net/ethernet/intel/i40e/i40e_main.c | 6 +++--- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)