patch "phy: Add support for Qualcomm's USB HS phy" added to usb-next
[email protected]
AppliedThis is a note to let you know that I've just added the patch titled
phy: Add support for Qualcomm's USB HS phy
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release during the merge window.
If you have any questions about this process, please let me know.
Quoted 1 line
From
e2427b09ba929c2b9d02556b74a85161a7364792Mon Sep 17 00:00:00 2001
From: Stephen Boyd <[email protected]>
Date: Wed, 25 Jan 2017 14:32:45 -0800
Subject: phy: Add support for Qualcomm's USB HS phy
The high-speed phy on qcom SoCs is controlled via the ULPI viewport.
Cc Kishon Vijay Abraham I <[email protected]>
Cc <[email protected]>
Acked-by Rob Herring <[email protected]>
Signed-off-by Stephen Boyd <[email protected]>
Signed-off-by Kishon Vijay Abraham I <[email protected]>
--- .../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 84 ++++++ drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-usb-hs.c | 296 +++++++++++++++++++++ 4 files changed, 389 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt create mode 100644 drivers/phy/phy-qcom-usb-hs.c
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt new file +84 -0
@@ -0,0 +1,84 @@ +Qualcomm's USB HS PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the + following: + + "qcom,usb-hs-phy-apq8064" + "qcom,usb-hs-phy-msm8916" + "qcom,usb-hs-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: <u32> + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain clock specifier for the reference and sleep + clocks + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "ref" and "sleep" for the reference and sleep + clocks respectively + +- resets: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain the phy and POR resets + +- reset-names: + Usage: required + Value type: <stringlist> + Definition: Should contain "phy" and "por" for the phy and POR resets + respectively + +- v3p3-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 3.3V supply + +- v1p8-supply: + Usage: required + Value type: <phandle> + Definition: Should contain a reference to the 1.8V supply + +- extcon: + Usage: optional + Value type: <prop-encoded-array> + Definition: Should contain the vbus extcon + +- qcom,init-seq: + Usage: optional + Value type: <u8 array> + Definition: Should contain a sequence of ULPI address and value pairs to + program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related + to Device Mode Eye Diagram test. The addresses are offsets + from the ULPI_EXT_VENDOR_SPECIFIC address, for example, + <0x1 0x53> would mean "write the value 0x53 to address 0x81". + +EXAMPLE + +otg: usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +};
drivers/phy/Kconfig +8 -0
@@ -437,6 +437,14 @@ config PHY_QCOM_UFS help Support for UFS PHY on QCOM chipsets. +config PHY_QCOM_USB_HS + tristate "Qualcomm USB HS PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB high-speed ULPI compliant phy on Qualcomm + chipsets. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS
drivers/phy/Makefile +1 -0
@@ -52,6 +52,7 @@ obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
drivers/phy/phy-qcom-usb-hs.c new file +296 -0
296 lines not on this page · raw message
Signature · 7 lines
2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html