Patch "USB: Add quirk for WORLDE easykey.25 MIDI keyboard" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

USB: Add quirk for WORLDE easykey.25 MIDI keyboard

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-add-quirk-for-worlde-easykey.25-midi-keyboard.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: =?UTF-8?q?Luk=C3=A1=C5=A1=20Lalinsk=C3=BD?= <[email protected]>
Date: Fri, 20 Jan 2017 19:46:34 +0100
Subject: USB: Add quirk for WORLDE easykey.25 MIDI keyboard
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Lukáš Lalinský <[email protected]>

commit d9b2997e4a0a874e452df7cdd7de5a54502bd0aa upstream.

Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly.

Relevant info from Wireshark:

[...]

CONFIGURATION DESCRIPTOR

    bLength: 9
    bDescriptorType: 0x02 (CONFIGURATION)
    wTotalLength: 101
    bNumInterfaces: 2
    bConfigurationValue: 1
    iConfiguration: 3
    Configuration bmAttributes: 0xc0  SELF-POWERED  NO REMOTE-WAKEUP
        1... .... = Must be 1: Must be 1 for USB 1.1 and higher
        .1.. .... = Self-Powered: This device is SELF-POWERED
        ..0. .... = Remote Wakeup: This device does NOT support remote wakeup
    bMaxPower: 50  (100mA)

[...]

45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING

[...]

URB setup

    bmRequestType: 0x80
        1... .... = Direction: Device-to-host
        .00. .... = Type: Standard (0x00)
        ...0 0000 = Recipient: Device (0x00)
    bRequest: GET DESCRIPTOR (6)
    Descriptor Index: 0x03
    bDescriptorType: 0x03
    Language Id: English (United States) (0x0409)
    wLength: 255

     46 0.369255       2.38.0                host                  USB      64     GET DESCRIPTOR Response STRING[Malformed Packet]

[...]

Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB
[Source: 2.38.0]
[Destination: host]
URB id: 0xffff88021f62d480
URB type: URB_COMPLETE ('C')
URB transfer type: URB_CONTROL (0x02)
Endpoint: 0x80, Direction: IN
Device: 38
URB bus id: 2
Device setup request: not relevant ('-')
Data: present (0)
URB sec: 1484896277
URB usec: 455031
URB status: Protocol error (-EPROTO) (-71)
URB length [bytes]: 0
Data length [bytes]: 0
[Request in: 45]
[Time from request: 0.000151000 seconds]
Unused Setup Header
Interval: 0
Start frame: 0
Copy of Transfer Flags: 0x00000200
Number of ISO descriptors: 0
[Malformed Packet: USB]
[Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
[Malformed Packet (Exception occurred)]
[Severity level: Error]
[Group: Malformed]

---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -37,6 +37,10 @@ static const struct usb_device_id usb_qu
 	/* CBM - Flash disk */
 	{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* WORLDE easy key (easykey.25) MIDI controller  */
+	{ USB_DEVICE(0x0218, 0x0401), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* HP 5300/5370C scanner */
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/usb-add-quirk-for-worlde-easykey.25-midi-keyboard.patch