drm/i915/glk: Apply cdclk workaround for DP audio
Subsystems (2)
PATCH 1/2 drm/i915/glk: Apply cdclk workaround for DP audio
Implement GLK cdclk restriction for DP audio, similar to what's implemented for BDW and other GEN9 platforms. The cdclk restriction has been refactored out of max. pixel clock computation as the 1:1 relationship between pixel clock and cdclk frequency does not hold for GLK.
--- drivers/gpu/drm/i915/intel_cdclk.c | 83 ++++++++++++++++++++++++-------------- 1 file changed, 52 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_cdclk.c +52 -31
@@ -1069,11 +1069,11 @@ static int bxt_calc_cdclk(int max_pixclk)return 144000 ; } -static int glk_calc_cdclk (int max_pixclk) +static int glk_calc_cdclk (int max_pixclk,int min_cdclk) { -if (max_pixclk >2 *158400 ) +if (max_pixclk >2 *158400 || min_cdclk >158400 )return 316800 ; -else if (max_pixclk >2 *79200 ) +else if (max_pixclk >2 *79200 || min_cdclk >79200 )return 158400 ;else return 79200 ;
@@ -1367,7 +1367,7 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)* Need to make this change after VBT has changes for BXT. */ if (IS_GEMINILAKE (dev_priv)) { - cdclk_state.cdclk =glk_calc_cdclk (0 ); + cdclk_state.cdclk =glk_calc_cdclk (0 ,0 ); cdclk_state.vco =glk_de_pll_vco (dev_priv, cdclk_state.cdclk); }else { cdclk_state.cdclk =bxt_calc_cdclk (0 );
@@ -1432,28 +1432,37 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, dev_priv->display.set_cdclk (dev_priv, cdclk_state); } -static int bdw_adjust_min_pipe_pixel_rate (struct intel_crtc_state *crtc_state, -int pixel_rate) +static int intel_min_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv = -to_i915 (crtc_state->base.crtc->dev); +struct drm_i915_private *dev_priv =to_i915 (state->dev); +struct drm_crtc *crtc; +struct drm_crtc_state *cstate; +int i; +int min_cdclk =0 ; -/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ -if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) - pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); +for_each_crtc_in_state (state, crtc, cstate, i) { +struct intel_crtc_state *crtc_state; -/* BSpec says "Do not use DisplayPort with CDCLK less than -* 432 MHz, audio enabled, port width x4, and link rate -* HBR2 (5.4 GHz), or else there may be audio corruption or -* screen corruption." -*/ -if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && - crtc_state->port_clock >=540000 && - crtc_state->lane_count ==4 ) - pixel_rate =max (432000 , pixel_rate); + crtc_state =to_intel_crtc_state (cstate); + +/* According to BSpec, "Do not use DisplayPort with CDCLK less +* than 432 MHz, audio enabled, port width x4, and link rate +* HBR2 (5.4 GHz), or else there may be audio corruption or +* screen corruption." for BDW and GEN9. The cdclk restriction +* for GLK is at 316.8 MHz +*/ +if (intel_crtc_has_dp_encoder (crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >=540000 && + crtc_state->lane_count ==4 ) { +if (IS_GEMINILAKE (dev_priv)) + min_cdclk =316800 ; +else if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) + min_cdclk =432000 ; + } + } -return pixel_rate; +return min_cdclk; }/* compute the max rate for new configuration */
@@ -1481,10 +1490,9 @@ static int intel_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = crtc_state->pixel_rate; -if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) - pixel_rate = -bdw_adjust_min_pipe_pixel_rate (crtc_state, - pixel_rate); +/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ +if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) + pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); intel_state->min_pixclk[i] = pixel_rate; }
@@ -1531,13 +1539,17 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk;/* * FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =bdw_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bdw_calc_cdclk (min_cdclk); +else + cdclk =bdw_calc_cdclk (max_pixclk);if (cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
@@ -1564,6 +1576,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct drm_i915_private *dev_priv =to_i915 (state->dev);const int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco; vco = intel_state->cdclk.logical.vco;
@@ -1574,7 +1587,10 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)* FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =skl_calc_cdclk (max_pixclk, vco); +if (min_cdclk > max_pixclk) + cdclk =skl_calc_cdclk (min_cdclk, vco); +else + cdclk =skl_calc_cdclk (max_pixclk, vco);if (cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
@@ -1604,13 +1620,18 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)int max_pixclk =intel_max_pixel_rate (state);struct intel_atomic_state *intel_state =to_intel_atomic_state (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco;if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (max_pixclk); + cdclk =glk_calc_cdclk (max_pixclk, min_cdclk); vco =glk_de_pll_vco (dev_priv, cdclk); }else { - cdclk =bxt_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bxt_calc_cdclk (min_cdclk); +else + cdclk =bxt_calc_cdclk (max_pixclk); + vco =bxt_de_pll_vco (dev_priv, cdclk); }
@@ -1625,7 +1646,7 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)if (!intel_state->active_crtcs) {if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (0 ); + cdclk =glk_calc_cdclk (0 ,0 ); vco =glk_de_pll_vco (dev_priv, cdclk); }else { cdclk =bxt_calc_cdclk (0 );
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: Implement BXT and GLK cdclk restriction based on Azalia BCLK
According to BSpec, "The CD clock frequency must be at least twice the frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by default. BXT and GLK both have cdclk frequencies that are less han 192 MHz, so apply the check conditionally for these platforms.
--- drivers/gpu/drm/i915/intel_cdclk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_cdclk.c +9 -1
@@ -1444,6 +1444,8 @@ static int intel_min_cdclk(struct drm_atomic_state *state)struct intel_crtc_state *crtc_state; crtc_state =to_intel_crtc_state (cstate); +if (!crtc_state->has_audio) +continue ;/* According to BSpec, "Do not use DisplayPort with CDCLK less * than 432 MHz, audio enabled, port width x4, and link rate
@@ -1452,7 +1454,6 @@ static int intel_min_cdclk(struct drm_atomic_state *state)* for GLK is at 316.8 MHz */ if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && crtc_state->port_clock >=540000 && crtc_state->lane_count ==4 ) {if (IS_GEMINILAKE (dev_priv))
@@ -1460,6 +1461,13 @@ static int intel_min_cdclk(struct drm_atomic_state *state)else if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) min_cdclk =432000 ; } + +/* According to BSpec, "The CD clock frequency must be at least +* twice the frequency of the Azalia BCLK." and BCLK is 96 MHz +* by default. +*/ +if (IS_BROXTON (dev_priv) ||IS_GEMINILAKE (dev_priv)) + min_cdclk =max (min_cdclk,2 *96000 ); }return min_cdclk;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Implement BXT and GLK cdclk restriction based on Azalia BCLK
Quoted 32 lines · Dhinakaran Pandiyan
According to BSpec, "The CD clock frequency must be at least twice the frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by default. BXT and GLK both have cdclk frequencies that are less han 192 MHz, so apply the check conditionally for these platforms.
Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_cdclk.c +2
-1@@ -1444,6 +1444,8 @@ static int intel_min_cdclk(struct drm_atomic_state *state)struct intel_crtc_state *crtc_state; crtc_state =to_intel_crtc_state (cstate); +if (!crtc_state->has_audio) +continue ;/* According to BSpec, "Do not use DisplayPort with CDCLK less * than 432 MHz, audio enabled, port width x4, and link rate @@ -1452,7 +1454,6 @@ static int intel_min_cdclk(struct drm_atomic_state *state)* for GLK is at 316.8 MHz */ if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && crtc_state->port_clock >=540000 && crtc_state->lane_count ==4 ) {if (IS_GEMINILAKE (dev_priv))
drivers/gpu/drm/i915/intel_cdclk.c static int intel_min_cdclk(struct drm_atomic_state *state) · line 1470
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +7
-0@@ -1460,6 +1461,13 @@ static int intel_min_cdclk(struct drm_atomic_state *state)else if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) min_cdclk =432000 ; } + +/* According to BSpec, "The CD clock frequency must be at least +* twice the frequency of the Azalia BCLK." and BCLK is 96 MHz +* by default. +*/ +if (IS_BROXTON (dev_priv) ||IS_GEMINILAKE (dev_priv)) + min_cdclk =max (min_cdclk,2 *96000 );
Hmm, my assumption from reviewing patch 1 of "this returns a valid cdclk" is broken here. Maybe with the idea of splitting the calc_cdclk_state() in two from my comment to Paulo's series this could be just:
min_cdclk = max(min_cdcdlk, choose_cdclk(2 * 96000));
?
On second thought, it does make sense for this kind of platform specific restrictions to be dealt with in platform specific hook, so duplicating that in calc_cdclk_state() is not that bad?
Ander
drivers/gpu/drm/i915/intel_cdclk.c static int intel_min_cdclk(struct drm_atomic_state *state) · line 1473
Quoted 3 lines
drivers/gpu/drm/i915/intel_cdclk.c +0
-0}return min_cdclk;
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Implement BXT and GLK cdclk restriction based on Azalia BCLK
Quoted 48 lines · Ander Conselvan De Oliveira
Quoted 32 lines · Dhinakaran Pandiyan
According to BSpec, "The CD clock frequency must be at least twice the frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by default. BXT and GLK both have cdclk frequencies that are less han 192 MHz, so apply the check conditionally for these platforms.
Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_cdclk.c +2
-1@@ -1444,6 +1444,8 @@ static int intel_min_cdclk(struct drm_atomic_state *state)struct intel_crtc_state *crtc_state; crtc_state =to_intel_crtc_state (cstate); +if (!crtc_state->has_audio) +continue ;/* According to BSpec, "Do not use DisplayPort with CDCLK less * than 432 MHz, audio enabled, port width x4, and link rate @@ -1452,7 +1454,6 @@ static int intel_min_cdclk(struct drm_atomic_state *state)* for GLK is at 316.8 MHz */ if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && crtc_state->port_clock >=540000 && crtc_state->lane_count ==4 ) {if (IS_GEMINILAKE (dev_priv))drivers/gpu/drm/i915/intel_cdclk.c static int intel_min_cdclk(struct drm_atomic_state *state) · line 1470
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +7
-0@@ -1460,6 +1461,13 @@ static int intel_min_cdclk(struct drm_atomic_state *state)else if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) min_cdclk =432000 ; } + +/* According to BSpec, "The CD clock frequency must be at least +* twice the frequency of the Azalia BCLK." and BCLK is 96 MHz +* by default. +*/ +if (IS_BROXTON (dev_priv) ||IS_GEMINILAKE (dev_priv)) + min_cdclk =max (min_cdclk,2 *96000 );Hmm, my assumption from reviewing patch 1 of "this returns a valid cdclk" is broken here. Maybe with the idea of splitting the
calc_cdclk_state()in two from my comment to Paulo's series this could be just:
Quoted 4 lines
min_cdclk = max(min_cdcdlk, choose_cdclk(2 * 96000));?
In this case, we'd have to call <platform>_calc_cdclk() twice? Once for finding a valid min. cdclk and then again to find the right cdclk for a given pixel rate.
Quoted 4 lines
On second thought, it does make sense for this kind of platform specific restrictions to be dealt with in platform specific hook, so duplicating that in
calc_cdclk_state()is not that bad?
I thought of that, but with comments and long conditional checks, it'd look ugly to duplicate this code in bdw, skl, bxt, glk specific hooks.
-DK
Quoted 10 lines
Ander
drivers/gpu/drm/i915/intel_cdclk.c static int intel_min_cdclk(struct drm_atomic_state *state) · line 1473
Quoted 3 lines
drivers/gpu/drm/i915/intel_cdclk.c +0
-0}return min_cdclk;_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: warning for series starting with [1/2] drm/i915/glk: Apply cdclk workaround for DP audio
In reply to Dhinakaran Pandiyan== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915/glk: Apply cdclk workaround for DP audio
URL : https://patchwork.freedesktop.org/series/20430/
State : warning
== Summary ==
Series 20430v1 Series without cover letter
https://patchwork.freedesktop.org/api/1.0/series/20430/revisions/1/mbox/
Test gem_exec_parallel:
Subgroup basic:
pass -> DMESG-WARN (fi-skl-6700k)fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 fi-bxt-t5700 total:108 pass:95 dwarn:0 dfail:0 fail:0 skip:12 fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 fi-kbl-7500u total:278 pass:259 dwarn:1 dfail:0 fail:0 skip:18 fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 fi-skl-6700k total:278 pass:255 dwarn:5 dfail:0 fail:0 skip:18 fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29
5d37006b578e38562382215e8782cfced9c992ce drm-tip: 2017y-02m-28d-16h-27m-13s UTC integration manifest bc61fcd drm/i915: Implement BXT and GLK cdclk restriction based on Azalia BCLK 122bad9 drm/i915/glk: Apply cdclk workaround for DP audio
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4011/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 114 lines · Dhinakaran Pandiyan
Implement GLK cdclk restriction for DP audio, similar to what's implemented for BDW and other GEN9 platforms. The cdclk restriction has been refactored out of max. pixel clock computation as the 1:1 relationship between pixel clock and cdclk frequency does not hold for GLK.
Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 83 ++++++++++++++++++++++++-------------- 1 file changed, 52 insertions(+), 31 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +35
-26@@ -1069,11 +1069,11 @@ static int bxt_calc_cdclk(int max_pixclk)return 144000 ; } -static int glk_calc_cdclk (int max_pixclk) +static int glk_calc_cdclk (int max_pixclk,int min_cdclk) { -if (max_pixclk >2 *158400 ) +if (max_pixclk >2 *158400 || min_cdclk >158400 )return 316800 ; -else if (max_pixclk >2 *79200 ) +else if (max_pixclk >2 *79200 || min_cdclk >79200 )return 158400 ;else return 79200 ;@@ -1367,7 +1367,7 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)* Need to make this change after VBT has changes for BXT. */ if (IS_GEMINILAKE (dev_priv)) { - cdclk_state.cdclk =glk_calc_cdclk (0 ); + cdclk_state.cdclk =glk_calc_cdclk (0 ,0 ); cdclk_state.vco =glk_de_pll_vco (dev_priv, cdclk_state.cdclk); }else { cdclk_state.cdclk =bxt_calc_cdclk (0 );@@ -1432,28 +1432,37 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, dev_priv->display.set_cdclk (dev_priv, cdclk_state); } -static int bdw_adjust_min_pipe_pixel_rate (struct intel_crtc_state *crtc_state, -int pixel_rate) +static int intel_min_cdclk (struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv = -to_i915 (crtc_state->base.crtc->dev); +struct drm_i915_private *dev_priv =to_i915 (state->dev); +struct drm_crtc *crtc; +struct drm_crtc_state *cstate; +int i; +int min_cdclk =0 ; -/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ -if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) - pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); +for_each_crtc_in_state (state, crtc, cstate, i) { +struct intel_crtc_state *crtc_state; -/* BSpec says "Do not use DisplayPort with CDCLK less than -* 432 MHz, audio enabled, port width x4, and link rate -* HBR2 (5.4 GHz), or else there may be audio corruption or -* screen corruption." -*/ -if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && - crtc_state->port_clock >=540000 && - crtc_state->lane_count ==4 ) - pixel_rate =max (432000 , pixel_rate); + crtc_state =to_intel_crtc_state (cstate); + +/* According to BSpec, "Do not use DisplayPort with CDCLK less +* than 432 MHz, audio enabled, port width x4, and link rate +* HBR2 (5.4 GHz), or else there may be audio corruption or +* screen corruption." for BDW and GEN9. The cdclk restriction +* for GLK is at 316.8 MHz +*/ +if (intel_crtc_has_dp_encoder (crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >=540000 && + crtc_state->lane_count ==4 ) { +if (IS_GEMINILAKE (dev_priv)) + min_cdclk =316800 ; +else if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) + min_cdclk =432000 ; + } + } -return pixel_rate; +return min_cdclk; }/* compute the max rate for new configuration */ @@ -1481,10 +1490,9 @@ static int intel_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = crtc_state->pixel_rate; -if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) - pixel_rate = -bdw_adjust_min_pipe_pixel_rate (crtc_state, - pixel_rate); +/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ +if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) + pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); intel_state->min_pixclk[i] = pixel_rate; }@@ -1531,13 +1539,17 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk;
drivers/gpu/drm/i915/intel_cdclk.c static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) · line 1552
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +4
-1/* * FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =bdw_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bdw_calc_cdclk (min_cdclk); +else + cdclk =bdw_calc_cdclk (max_pixclk);
Looks like intel_min_cdclk() returns a valid cdclk for the platform, so wouldn't
cdclk = *_calc_cdclk(max_pixclk); if (cdclk < min_cdclk) cdclk = min_cdclk;
be simpler?
Quoted 32 lines
drivers/gpu/drm/i915/intel_cdclk.c +7
-2if (cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",@@ -1564,6 +1576,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct drm_i915_private *dev_priv =to_i915 (state->dev);const int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco; vco = intel_state->cdclk.logical.vco;@@ -1574,7 +1587,10 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)* FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =skl_calc_cdclk (max_pixclk, vco); +if (min_cdclk > max_pixclk) + cdclk =skl_calc_cdclk (min_cdclk, vco); +else + cdclk =skl_calc_cdclk (max_pixclk, vco);if (cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",@@ -1604,13 +1620,18 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)int max_pixclk =intel_max_pixel_rate (state);struct intel_atomic_state *intel_state =to_intel_atomic_state (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco;if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (max_pixclk); + cdclk =glk_calc_cdclk (max_pixclk, min_cdclk);
drivers/gpu/drm/i915/intel_cdclk.c static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) · line 1636
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +5
-1vco =glk_de_pll_vco (dev_priv, cdclk); }else { - cdclk =bxt_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bxt_calc_cdclk (min_cdclk); +else + cdclk =bxt_calc_cdclk (max_pixclk); + vco =bxt_de_pll_vco (dev_priv, cdclk); }
With the idea above, this would become
if (IS_GEMINILAKE(dev_priv))
cdclk = glk_calc_cdclk(max_pixclk); else cdclk = bxt_calc_cdclk(max_pixclk);
if (cdclk < min_cdclk)
cdclk = min_cdclk;
if (IS_GEMINILAKE(dev_priv))
vco = glk_de_pll_vco(dev_priv, cdclk); else vco = bxt_de_pll_vco(dev_priv, cdclk);
Not great, but maybe still better than changing the signature of glk_calc_cdclk()?
Also, this conflicts with Paulo's cdclk clean up [1].
[1] https://patchwork.freedesktop.org/series/19974/
Ander
drivers/gpu/drm/i915/intel_cdclk.c static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) · line 1652
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +1
-1@@ -1625,7 +1646,7 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)if (!intel_state->active_crtcs) {if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (0 ); + cdclk =glk_calc_cdclk (0 ,0 ); vco =glk_de_pll_vco (dev_priv, cdclk); }else { cdclk =bxt_calc_cdclk (0 );
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Em Ter, 2017-02-28 às 18:57 -0800, Dhinakaran Pandiyan escreveu:
Quoted 62 lines
Implement GLK cdclk restriction for DP audio, similar to what's implemented
for BDW and other GEN9 platforms. The cdclk restriction has been refactored out of max. pixel clock computation as the 1:1 relationship
between pixel clock and cdclk frequency does not hold for GLK.Signed-off-by Dhinakaran Pandiyan <[email protected]>---
drivers/gpu/drm/i915/intel_cdclk.c | 83 ++++++++++++++++++++++++--
------------1 file changed, 52 insertions(+), 31 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1069,11 +1069,11 @@ static int bxt_calc_cdclk(int max_pixclk) return 144000; }drivers/gpu/drm/i915/intel_cdclk.c +1
-1-static int glk_calc_cdclk (int max_pixclk) +static int glk_calc_cdclk (int max_pixclk,int min_cdclk){
drivers/gpu/drm/i915/intel_cdclk.c +1
-1-if (max_pixclk >2 *158400 ) +if (max_pixclk >2 *158400 || min_cdclk >158400 )return 316800;
drivers/gpu/drm/i915/intel_cdclk.c +1
-1-else if (max_pixclk >2 *79200 ) +else if (max_pixclk >2 *79200 || min_cdclk >79200 )return 158400;
else
return 79200;drivers/gpu/drm/i915/intel_cdclk.c +1
-1@@ -1367,7 +1367,7 @@ void bxt_init_cdclk(struct drm_i915_private*dev_priv) * Need to make this change after VBT has changes for BXT. */ if (IS_GEMINILAKE(dev_priv)) { - cdclk_state.cdclk =glk_calc_cdclk (0 ); + cdclk_state.cdclk =glk_calc_cdclk (0 ,0 ); cdclk_state.vco = glk_de_pll_vco(dev_priv, cdclk_state.cdclk);} else {
cdclk_state.cdclk =bxt_calc_cdclk(0);drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1432,28 +1432,37 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, dev_priv->display.set_cdclk(dev_priv, cdclk_state); }
-static int bdw_adjust_min_pipe_pixel_rate(structintel_crtc_state*crtc_state,drivers/gpu/drm/i915/intel_cdclk.c +1
-1- int pixel_rate) +static int intel_min_cdclk (struct drm_atomic_state *state){
drivers/gpu/drm/i915/intel_cdclk.c +5
-2-struct drm_i915_private *dev_priv = -to_i915 (crtc_state->base.crtc->dev); +struct drm_i915_private *dev_priv =to_i915 (state->dev); +struct drm_crtc *crtc; +struct drm_crtc_state *cstate; +int i; +int min_cdclk =0 ;
drivers/gpu/drm/i915/intel_cdclk.c void intel_set_cdclk(struct drm_i915_private *dev_priv, · line 1444
Quoted 5 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-3-/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ -if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) - pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); +for_each_crtc_in_state (state, crtc, cstate, i) { +struct intel_crtc_state *crtc_state;
Here we're just looking at the CRTCs in the state. Notice that max_pixel_rate caches the values for all the CRTCs so we can account for all of them instead of just the ones that are in the current atomic commit.
What if some other CRTC not in the current state raised the minimum clock to 432/316? Don't we end up risking not noticing it and going with a lower clock here? Imagine two very-low-res monitors with audio enabled. First we do the modeset on the audio monitor, then we enable the other monitor. Won't the second modeset end up wrongly reducing the clock below 432/316?
In other words: why doesn't min_cdclk need to do the same caching scheme that max_cdclk needs?
drivers/gpu/drm/i915/intel_cdclk.c void intel_set_cdclk(struct drm_i915_private *dev_priv, · line 1446
Quoted 12 lines
drivers/gpu/drm/i915/intel_cdclk.c +1
-10-/* BSpec says "Do not use DisplayPort with CDCLK less than -* 432 MHz, audio enabled, port width x4, and link rate -* HBR2 (5.4 GHz), or else there may be audio corruption or -* screen corruption." -*/ -if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && - crtc_state->port_clock >= 540000 && - crtc_state->lane_count == 4) - pixel_rate =max (432000 , pixel_rate); + crtc_state =to_intel_crtc_state (cstate);
Can you please clarify why it's not possible to simply add a new check for GLK in the old function? That would have been simpler.
If we still want to go with this approach, I'd suggest splitting your commit in two separate commits: one reworking the current code (and addressing the issue I pointed above), and another adding the GLK stuff.
Quoted 123 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-0+ +/* According to BSpec, "Do not use DisplayPort with CDCLK less
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ * than 432 MHz, audio enabled, port width x4, andlink rate
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ * HBR2 (5.4 GHz), or else there may be audiocorruption or
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ * screen corruption." for BDW and GEN9. The cdclkrestriction
drivers/gpu/drm/i915/intel_cdclk.c +9
-0+* for GLK is at 316.8 MHz +*/ +if (intel_crtc_has_dp_encoder (crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) { +if (IS_GEMINILAKE (dev_priv)) + min_cdclk =316800 ; + else if (IS_BROADWELL(dev_priv) ||
IS_GEN9(dev_priv))drivers/gpu/drm/i915/intel_cdclk.c +3
-0+ min_cdclk =432000 ; + } + }drivers/gpu/drm/i915/intel_cdclk.c +1
-1-return pixel_rate; +return min_cdclk;}
/* compute the max rate for new configuration */drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1481,10 +1490,9 @@ static int intel_max_pixel_rate(struct drm_atomic_state *state)
pixel_rate=crtc_state->pixel_rate;drivers/gpu/drm/i915/intel_cdclk.c +0
-3-if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) - pixel_rate = - bdw_adjust_min_pipe_pixel_rate(crtc_state,
drivers/gpu/drm/i915/intel_cdclk.c +0
-1- pixel
_rate);drivers/gpu/drm/i915/intel_cdclk.c +1
-0+/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ if (IS_BROADWELL(dev_priv) && crtc_state-Quoted 1 line
ips_enabled)drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100,95);
intel_state->min_pixclk[i] =pixel_rate; }drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1531,13 +1539,17 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) struct drm_i915_private *dev_priv = to_i915(state->dev);struct
intel_atomic_state*intel_state=to_intel_atomic_state(state);
intmax_pixclk=intel_max_pixel_rate(state);drivers/gpu/drm/i915/intel_cdclk.c +1
-0+int min_cdclk =intel_min_cdclk (state);int cdclk;
/*
* FIXME should also account for plane ratio
* once 64bpp pixel formats are supported. */drivers/gpu/drm/i915/intel_cdclk.c +4
-1- cdclk =bdw_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bdw_calc_cdclk (min_cdclk); +else + cdclk =bdw_calc_cdclk (max_pixclk);
if (cdclk >dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1564,6 +1576,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)struct
intel_atomic_state*intel_state=to_intel_atomic_state(state);
structdrm_i915_private*dev_priv=to_i915(state->dev); const intmax_pixclk=intel_max_pixel_rate(state);drivers/gpu/drm/i915/intel_cdclk.c +1
-0+int min_cdclk =intel_min_cdclk (state);int cdclk, vco;
vco =intel_state->cdclk.logical.vco;drivers/gpu/drm/i915/intel_cdclk.c +4
-1@@ -1574,7 +1587,10 @@ static int skl_modeset_calc_cdclk(structdrm_atomic_state *state) * FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =skl_calc_cdclk (max_pixclk, vco); +if (min_cdclk > max_pixclk) + cdclk =skl_calc_cdclk (min_cdclk, vco); +else + cdclk =skl_calc_cdclk (max_pixclk, vco);
if (cdclk >dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n",drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1604,13 +1620,18 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) int max_pixclk = intel_max_pixel_rate(state);struct
intel_atomic_state*intel_state=
to_intel_atomic_state(state);drivers/gpu/drm/i915/intel_cdclk.c +1
-0+int min_cdclk =intel_min_cdclk (state);int cdclk, vco;
if (IS_GEMINILAKE(dev_priv)) {drivers/gpu/drm/i915/intel_cdclk.c +1
-1- cdclk =glk_calc_cdclk (max_pixclk); + cdclk =glk_calc_cdclk (max_pixclk, min_cdclk);vco =
glk_de_pll_vco(dev_priv, cdclk); } else {drivers/gpu/drm/i915/intel_cdclk.c +5
-1- cdclk =bxt_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bxt_calc_cdclk (min_cdclk); +else + cdclk =bxt_calc_cdclk (max_pixclk); +vco =
bxt_de_pll_vco(dev_priv, cdclk); }drivers/gpu/drm/i915/intel_cdclk.c +0
-0@@ -1625,7 +1646,7 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)
if (!intel_state->active_crtcs) {
if (IS_GEMINILAKE(dev_priv)) {drivers/gpu/drm/i915/intel_cdclk.c +1
-1- cdclk =glk_calc_cdclk (0 ); + cdclk =glk_calc_cdclk (0 ,0 );
Quoted 3 lines
vco =
glk_de_pll_vco(dev_priv, cdclk); } else {
cdclk =bxt_calc_cdclk(0);
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 81 lines · Paulo Zanoni
Em Ter, 2017-02-28 às 18:57 -0800, Dhinakaran Pandiyan escreveu:
Quoted 57 lines
Implement GLK cdclk restriction for DP audio, similar to what's implemented
for BDW and other GEN9 platforms. The cdclk restriction has been refactored out of max. pixel clock computation as the 1:1 relationship
between pixel clock and cdclk frequency does not hold for GLK.Signed-off-by Dhinakaran Pandiyan <[email protected]>--- drivers/gpu/drm/i915/intel_cdclk.c | 83 ++++++++++++++++++++++++-- ------------ 1 file changed, 52 insertions(+), 31 deletions(-)drivers/gpu/drm/i915/intel_cdclk.c +4
-4@@ -1069,11 +1069,11 @@ static int bxt_calc_cdclk(int max_pixclk)return 144000 ; } -static int glk_calc_cdclk (int max_pixclk) +static int glk_calc_cdclk (int max_pixclk,int min_cdclk) { -if (max_pixclk >2 *158400 ) +if (max_pixclk >2 *158400 || min_cdclk >158400 )return 316800 ; -else if (max_pixclk >2 *79200 ) +else if (max_pixclk >2 *79200 || min_cdclk >79200 )return 158400 ;else return 79200 ;@@ -1367,7 +1367,7 @@ void bxt_init_cdclk(struct drm_i915_private*dev_priv) * Need to make this change after VBT has changes for BXT. */ if (IS_GEMINILAKE (dev_priv)) { - cdclk_state.cdclk =glk_calc_cdclk (0 ); + cdclk_state.cdclk =glk_calc_cdclk (0 ,0 ); cdclk_state.vco =glk_de_pll_vco (dev_priv, cdclk_state.cdclk);drivers/gpu/drm/i915/intel_cdclk.c +2
-4}else { cdclk_state.cdclk =bxt_calc_cdclk (0 );@@ -1432,28 +1432,37 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv, dev_priv->display.set_cdclk (dev_priv, cdclk_state); } -static int bdw_adjust_min_pipe_pixel_rate (struct intel_crtc_state *crtc_state, -int pixel_rate) +static int intel_min_cdclk(struct drm_atomic_state *state) { -struct drm_i915_private *dev_priv = -to_i915 (crtc_state->base.crtc->dev); +struct drm_i915_private *dev_priv =to_i915 (state->dev);drivers/gpu/drm/i915/intel_cdclk.c void intel_set_cdclk(struct drm_i915_private · line 1446
Quoted 10 lines
drivers/gpu/drm/i915/intel_cdclk.c +6
-3+struct drm_crtc *crtc; +struct drm_crtc_state *cstate; +int i; +int min_cdclk =0 ; -/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ -if (IS_BROADWELL (dev_priv) && crtc_state->ips_enabled) - pixel_rate =DIV_ROUND_UP (pixel_rate *100 ,95 ); +for_each_crtc_in_state (state, crtc, cstate, i) { +struct intel_crtc_state *crtc_state;Here we're just looking at the CRTCs in the state. Notice that
max_pixel_ratecaches the values for all the CRTCs so we can account for all of them instead of just the ones that are in the current atomic commit.What if some other CRTC not in the current state raised the minimum clock to 432/316? Don't we end up risking not noticing it and going with a lower clock here? Imagine two very-low-res monitors with audio enabled. First we do the modeset on the audio monitor, then we enable the other monitor. Won't the second modeset end up wrongly reducing the clock below 432/316?
Quoted 3 lines
In other words: why doesn't
min_cdclkneed to do the same caching scheme thatmax_cdclkneeds?
You are right, I wonder if intel_atomic_state.cdclk would be a good place to cache that.
Quoted 16 lines
drivers/gpu/drm/i915/intel_cdclk.c void intel_set_cdclk(struct drm_i915_private *dev_priv, · line 1446
Quoted 12 lines
drivers/gpu/drm/i915/intel_cdclk.c +1
-10-/* BSpec says "Do not use DisplayPort with CDCLK less than -* 432 MHz, audio enabled, port width x4, and link rate -* HBR2 (5.4 GHz), or else there may be audio corruption or -* screen corruption." -*/ -if (intel_crtc_has_dp_encoder (crtc_state) && - crtc_state->has_audio && - crtc_state->port_clock >=540000 && - crtc_state->lane_count ==4 ) - pixel_rate =max (432000 , pixel_rate); + crtc_state =to_intel_crtc_state (cstate);Can you please clarify why it's not possible to simply add a new check for GLK in the old function? That would have been simpler.
The old function, bdw_adjust_min_pipe_pixel_rate(), assumes that cdclk is same as the pixel rate and returns min. cdclk to intel_max_pixel_rate() when audio workarounds have to applied. This cdclk value is passed on to glk_calc_cdclk(), which needs pixel rate as input and is compared against 2x cdclk to arrive at a valid cdclk. So, passing in cdclk to glk_calc_cdclk(), instead of pixel rate is a bug. The new function I am adding separates the pixel rate computation and min cdclk restriction.
The other option I can think of is to change intel_max_pixel_rate() to return both the min cdclk and max pixel rate.
-DK
Quoted 125 lines
If we still want to go with this approach, I'd suggest splitting your commit in two separate commits: one reworking the current code (and addressing the issue I pointed above), and another adding the GLK stuff.
Quoted 119 lines
drivers/gpu/drm/i915/intel_cdclk.c +2
-0+ +/* According to BSpec, "Do not use DisplayPort with CDCLK less
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+* than 432 MHz, audio enabled, port width x4, and link rate
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+* HBR2 (5.4 GHz), or else there may be audio corruption or
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+* screen corruption." for BDW and GEN9. The cdclk restriction
drivers/gpu/drm/i915/intel_cdclk.c +9
-0+* for GLK is at 316.8 MHz +*/ +if (intel_crtc_has_dp_encoder (crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >=540000 && + crtc_state->lane_count ==4 ) { +if (IS_GEMINILAKE (dev_priv)) + min_cdclk =316800 ; + else if (IS_BROADWELL(dev_priv) ||
IS_GEN9(dev_priv))drivers/gpu/drm/i915/intel_cdclk.c +5
-5+ min_cdclk =432000 ; + } + } -return pixel_rate; +return min_cdclk; }/* compute the max rate for new configuration */ @@ -1481,10 +1490,9 @@ static int intel_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = crtc_state->pixel_rate; -if (IS_BROADWELL (dev_priv) ||IS_GEN9 (dev_priv)) - pixel_rate = -bdw_adjust_min_pipe_pixel_rate (crtc_ state, - pixel _rate); +/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ if (IS_BROADWELL(dev_priv) && crtc_state-Quoted 1 line
ips_enabled)drivers/gpu/drm/i915/intel_cdclk.c +1
-0+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100,95);
drivers/gpu/drm/i915/intel_cdclk.c +5
-1intel_state->min_pixclk[i] = pixel_rate; }@@ -1531,13 +1539,17 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)struct drm_i915_private *dev_priv =to_i915 (state->dev);struct intel_atomic_state *intel_state =to_intel_atomic_state (state);int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk;/* * FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =bdw_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bdw_calc_cdclk (min_cdclk); +else + cdclk =bdw_calc_cdclk (max_pixclk);drivers/gpu/drm/i915/intel_cdclk.c +0
-0if (cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max(%d kHz)\n",
drivers/gpu/drm/i915/intel_cdclk.c +1
-0@@ -1564,6 +1576,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)struct intel_atomic_state *intel_state =to_intel_atomic_state (state);struct drm_i915_private *dev_priv =to_i915 (state->dev);const int max_pixclk =intel_max_pixel_rate (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco;drivers/gpu/drm/i915/intel_cdclk.c +4
-1vco = intel_state->cdclk.logical.vco;@@ -1574,7 +1587,10 @@ static int skl_modeset_calc_cdclk(structdrm_atomic_state *state) * FIXME should also account for plane ratio * once 64bpp pixel formats are supported. */ - cdclk =skl_calc_cdclk (max_pixclk, vco); +if (min_cdclk > max_pixclk) + cdclk =skl_calc_cdclk (min_cdclk, vco); +else + cdclk =skl_calc_cdclk (max_pixclk, vco);if (cdclk > dev_priv->max_cdclk_freq) {DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max
(%d kHz)\n",drivers/gpu/drm/i915/intel_cdclk.c +7
-2@@ -1604,13 +1620,18 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)int max_pixclk =intel_max_pixel_rate (state);struct intel_atomic_state *intel_state =to_intel_atomic_state (state); +int min_cdclk =intel_min_cdclk (state);int cdclk, vco;if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (max_pixclk); + cdclk =glk_calc_cdclk (max_pixclk, min_cdclk); vco =glk_de_pll_vco (dev_priv, cdclk); }else { - cdclk =bxt_calc_cdclk (max_pixclk); +if (min_cdclk > max_pixclk) + cdclk =bxt_calc_cdclk (min_cdclk); +else + cdclk =bxt_calc_cdclk (max_pixclk); + vco =bxt_de_pll_vco (dev_priv, cdclk); }@@ -1625,7 +1646,7 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)
Quoted 11 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_cdclk.c +1
-1if (!intel_state->active_crtcs) {if (IS_GEMINILAKE (dev_priv)) { - cdclk =glk_calc_cdclk (0 ); + cdclk =glk_calc_cdclk (0 ,0 ); vco =glk_de_pll_vco (dev_priv, cdclk); }else {cdclk =
bxt_calc_cdclk(0);_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx