Skip to contentSkip to conversation

mfd: arizona: Remove duplicate set of ret variable

PATCH Applied Charles Keepax 3 participants 8 messages Mar 15, 2017 – May 5, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 mfd: arizona: Remove duplicate set of ret variable

arizona_poll_reg already returns ETIMEDOUT if we don't see the expected register changes before the time out, so remove pointless local setting of ETIMEDOUT.

---

No changes since v3.

 drivers/mfd/arizona-core.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/mfd/arizona-core.c +2 -6
index b6d4bc6..e00f577 100644
@@ -342,10 +342,8 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
-	if (ret) {
-		ret = -ETIMEDOUT;
+	if (ret)
 		goto err_fll;
-	}
 
 	ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
 	if (ret) {
@@ -407,11 +405,9 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 
 	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
-	if (ret) {
+	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
 			     ARIZONA_WSEQ_ABORT);
-		ret = -ETIMEDOUT;
-	}
 
 err:
 	err = arizona_disable_freerun_sysclk(arizona, &state);
Signature · 1 line
2.1.4
#1 lore raw

PATCH v4 2/3 mfd: arizona: Display register addresses in hex

Register addresses are normally displayed in hex throughout the Arizona driver. Update the arizona_poll_reg function to follow this convention.

---

No changes since v4.

 drivers/mfd/arizona-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mfd/arizona-core.c +2 -2
index e00f577..4cb34c3 100644
@@ -245,7 +245,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 	for (i = 0; i < timeout; i++) {
 		ret = regmap_read(arizona->regmap, reg, &val);
 		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read reg %u: %d\n",
+			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
 				reg, ret);
 			continue;
 		}
@@ -256,7 +256,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 		usleep_range(1000, 5000);
 	}
 
-	dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
+	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
 	return -ETIMEDOUT;
 }
 
Signature · 1 line
2.1.4
Applied
#2 lore raw

Re: [PATCH v4 2/3] mfd: arizona: Display register addresses in hex

Quoted 10 lines · Charles Keepax

Register addresses are normally displayed in hex throughout the Arizona driver. Update the arizona_poll_reg function to follow this convention.

---

No changes since v4.

 drivers/mfd/arizona-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

Quoted 22 lines
drivers/mfd/arizona-core.c +2 -2
index e00f577..4cb34c3 100644
@@ -245,7 +245,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 	for (i = 0; i < timeout; i++) {
 		ret = regmap_read(arizona->regmap, reg, &val);
 		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read reg %u: %d\n",
+			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
 				reg, ret);
 			continue;
 		}
@@ -256,7 +256,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 		usleep_range(1000, 5000);
 	}
 
-	dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
+	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
 	return -ETIMEDOUT;
 }
 
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#3 lore raw

PATCH v4 3/3 mfd: arizona: Refactor arizona_poll_reg

In reply to Charles Keepax

Currently, we specify the timeout in terms of the number of polls but it is more clear from a user of the functions perspective to specify the timeout directly in milliseconds, as such update the function to these new semantics.

Additionally, arizona_poll_reg essentially hard-codes regmap_read_poll_timeout, update the implementation to use regmap_read_poll_timeout. We still keep arizona_poll_reg around as regmap_read_poll_timeout is a macro so rather than expand this for each caller keep it wrapped in arizona_poll_reg.

Whilst we are doing this make the timeouts a little more generous as the previous system had a bit more slack as it was done as a delay per iteration of the loop whereas regmap_read_poll_timeout compares ktime's.

---

Changes since v3:
- Squashed together patches 3/4 from the v3 chain.

Thanks,
Charles

 drivers/mfd/arizona-core.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)
drivers/mfd/arizona-core.c +16 -20
index 4cb34c3..75488e6 100644
@@ -235,29 +235,25 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#define ARIZONA_REG_POLL_DELAY_US 7500
+
 static int arizona_poll_reg(struct arizona *arizona,
-			    int timeout, unsigned int reg,
+			    int timeout_ms, unsigned int reg,
 			    unsigned int mask, unsigned int target)
 {
 	unsigned int val = 0;
-	int ret, i;
-
-	for (i = 0; i < timeout; i++) {
-		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
-				reg, ret);
-			continue;
-		}
-
-		if ((val & mask) == target)
-			return 0;
+	int ret;
 
-		usleep_range(1000, 5000);
-	}
+	ret = regmap_read_poll_timeout(arizona->regmap,
+				       ARIZONA_INTERRUPT_RAW_STATUS_5, val,
+				       ((val & mask) == target),
+				       ARIZONA_REG_POLL_DELAY_US,
+				       timeout_ms * 1000);
+	if (ret)
+		dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n",
+			reg, val);
 
-	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static int arizona_wait_for_boot(struct arizona *arizona)
@@ -269,7 +265,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
 	 * we won't race with the interrupt handler as it'll be blocked on
 	 * runtime resume.
 	 */
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
 
 	if (!ret)
@@ -339,7 +335,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 			ret);
 		return ret;
 	}
-	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 180, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
 	if (ret)
@@ -403,7 +399,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
 	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
Signature · 1 line
2.1.4
Applied
#4 lore raw

Re: [PATCH v4 3/3] mfd: arizona: Refactor arizona_poll_reg

Quoted 18 lines · Charles Keepax

Currently, we specify the timeout in terms of the number of polls but it is more clear from a user of the functions perspective to specify the timeout directly in milliseconds, as such update the function to these new semantics.

Additionally, arizona_poll_reg essentially hard-codes regmap_read_poll_timeout, update the implementation to use regmap_read_poll_timeout. We still keep arizona_poll_reg around as regmap_read_poll_timeout is a macro so rather than expand this for each caller keep it wrapped in arizona_poll_reg.

Whilst we are doing this make the timeouts a little more generous as the previous system had a bit more slack as it was done as a delay per iteration of the loop whereas regmap_read_poll_timeout compares ktime's.

---

Quoted 8 lines

Changes since v3:
- Squashed together patches 3/4 from the v3 chain.

Thanks,
Charles

 drivers/mfd/arizona-core.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

Much better, thanks.

Applied, thanks.

Quoted 74 lines
drivers/mfd/arizona-core.c +16 -20
index 4cb34c3..75488e6 100644
@@ -235,29 +235,25 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#define ARIZONA_REG_POLL_DELAY_US 7500
+
 static int arizona_poll_reg(struct arizona *arizona,
-			    int timeout, unsigned int reg,
+			    int timeout_ms, unsigned int reg,
 			    unsigned int mask, unsigned int target)
 {
 	unsigned int val = 0;
-	int ret, i;
-
-	for (i = 0; i < timeout; i++) {
-		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
-				reg, ret);
-			continue;
-		}
-
-		if ((val & mask) == target)
-			return 0;
+	int ret;
 
-		usleep_range(1000, 5000);
-	}
+	ret = regmap_read_poll_timeout(arizona->regmap,
+				       ARIZONA_INTERRUPT_RAW_STATUS_5, val,
+				       ((val & mask) == target),
+				       ARIZONA_REG_POLL_DELAY_US,
+				       timeout_ms * 1000);
+	if (ret)
+		dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n",
+			reg, val);
 
-	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static int arizona_wait_for_boot(struct arizona *arizona)
@@ -269,7 +265,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
 	 * we won't race with the interrupt handler as it'll be blocked on
 	 * runtime resume.
 	 */
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
 
 	if (!ret)
@@ -339,7 +335,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 			ret);
 		return ret;
 	}
-	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 180, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
 	if (ret)
@@ -403,7 +399,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
 	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#5 lore raw

Re: [PATCH v4 3/3] mfd: arizona: Refactor arizona_poll_reg

In reply to Charles Keepax

Hi Charles,

Quoted 51 lines · Charles Keepax

Currently, we specify the timeout in terms of the number of polls but it is more clear from a user of the functions perspective to specify the timeout directly in milliseconds, as such update the function to these new semantics.

Additionally, arizona_poll_reg essentially hard-codes regmap_read_poll_timeout, update the implementation to use regmap_read_poll_timeout. We still keep arizona_poll_reg around as regmap_read_poll_timeout is a macro so rather than expand this for each caller keep it wrapped in arizona_poll_reg.

Whilst we are doing this make the timeouts a little more generous as the previous system had a bit more slack as it was done as a delay per iteration of the loop whereas regmap_read_poll_timeout compares ktime's.

---

Changes since v3:
- Squashed together patches 3/4 from the v3 chain.

Thanks,
Charles

 drivers/mfd/arizona-core.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)
drivers/mfd/arizona-core.c +3 -9
index 4cb34c3..75488e6 100644
@@ -235,29 +235,25 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#define ARIZONA_REG_POLL_DELAY_US 7500
+
 static int arizona_poll_reg(struct arizona *arizona,
-			    int timeout, unsigned int reg,
+			    int timeout_ms, unsigned int reg,
 			    unsigned int mask, unsigned int target)
 {
 	unsigned int val = 0;
-	int ret, i;
-
-	for (i = 0; i < timeout; i++) {
-		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret != 0) {
-			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
-				reg, ret);
-			continue;

drivers/mfd/arizona-core.c static irqreturn_t arizona_overclocked(int irq, void *data) · line 248

Quoted 10 lines
drivers/mfd/arizona-core.c +3 -6
-		}
-
-		if ((val & mask) == target)
-			return 0;
+	int ret;
 
-		usleep_range(1000, 5000);
-	}
+	ret = regmap_read_poll_timeout(arizona->regmap,
+				       ARIZONA_INTERRUPT_RAW_STATUS_5, val,

s/ARIZONA_INTERRUPT_RAW_STATUS_5/reg/;

Regards
Andrzej

Quoted 41 lines
drivers/mfd/arizona-core.c +10 -5
+				       ((val & mask) == target),
+				       ARIZONA_REG_POLL_DELAY_US,
+				       timeout_ms * 1000);
+	if (ret)
+		dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n",
+			reg, val);
 
-	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
-	return -ETIMEDOUT;
+	return ret;
 }
 
 static int arizona_wait_for_boot(struct arizona *arizona)
@@ -269,7 +265,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
 	 * we won't race with the interrupt handler as it'll be blocked on
 	 * runtime resume.
 	 */
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
 
 	if (!ret)
@@ -339,7 +335,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 			ret);
 		return ret;
 	}
-	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 180, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
 	if (ret)
@@ -403,7 +399,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+	ret = arizona_poll_reg(arizona, 30, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
 	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
#6 lore raw

Re: [PATCH v4 3/3] mfd: arizona: Refactor arizona_poll_reg

Quoted 11 lines · Andrzej Hajda

Hi Charles,

drivers/mfd/arizona-core.c static irqreturn_t arizona_overclocked(int irq, void *data) · line 248

Quoted 4 lines · Charles Keepax
drivers/mfd/arizona-core.c +2 -2
-		usleep_range(1000, 5000);
-	}
+	ret = regmap_read_poll_timeout(arizona->regmap,
+				       ARIZONA_INTERRUPT_RAW_STATUS_5, val,

s/ARIZONA_INTERRUPT_RAW_STATUS_5/reg/;

Quoted 3 lines

Regards
Andrzej

Thank you very much for spotting that I will send a fix on Monday.

Thanks,
Charles

Applied
#7 lore raw
In reply to Charles Keepax
Quoted 11 lines · Charles Keepax

arizona_poll_reg already returns ETIMEDOUT if we don't see the expected register changes before the time out, so remove pointless local setting of ETIMEDOUT.

---

No changes since v3.

 drivers/mfd/arizona-core.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

Applied, thanks.

Quoted 29 lines
drivers/mfd/arizona-core.c +2 -6
index b6d4bc6..e00f577 100644
@@ -342,10 +342,8 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
-	if (ret) {
-		ret = -ETIMEDOUT;
+	if (ret)
 		goto err_fll;
-	}
 
 	ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
 	if (ret) {
@@ -407,11 +405,9 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 
 	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
-	if (ret) {
+	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
 			     ARIZONA_WSEQ_ABORT);
-		ret = -ETIMEDOUT;
-	}
 
 err:
 	err = arizona_disable_freerun_sysclk(arizona, &state);
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog