Skip to contentSkip to conversation

usb: hub: Disable autosuspend before disabling usb device

RFC PATCH In review Guenter Roeck 2 participants 3 messages Mar 17, 2017 USB

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 usb: hub: Disable autosuspend before disabling usb device

While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed.

Unable to handle kernel NULL pointer dereference at virtual address 00000218
pgd = ffffffc00165f000
[00000218] *pgd=000000000174f003, *pud=000000000174f003,
				*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac

ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun

CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507
Hardware name: Google Kevin (DT)
Workqueue: pm pm_runtime_work
task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000
PC is at autosuspend_check+0x74/0x174
LR is at autosuspend_check+0x70/0x174
...
Call trace:
[<ffffffc00080dcc0>] autosuspend_check+0x74/0x174
[<ffffffc000810500>] usb_runtime_idle+0x20/0x40
[<ffffffc000785ae0>] __rpm_callback+0x48/0x7c
[<ffffffc000786af0>] rpm_idle+0x1e8/0x498
[<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

Source:

(gdb) l *0xffffffc00080dcc0
0xffffffc00080dcc0 is in autosuspend_check
(drivers/usb/core/driver.c:1778).
1773 /* We don't need to check interfaces that are
1774 * disabled for runtime PM. Either they are unbound
1775 * or else their drivers don't support autosuspend
1776 * and so they are permanently active.
1777 */
1778 if (intf->dev.power.disable_depth)
1779 continue;
1780 if (atomic_read(&intf->dev.power.usage_count) > 0)
1781 return -EBUSY;
1782 w |= intf->needs_remote_wakeup;

Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check() and possibly by other callers.

Explicitly disable autosuspend in usb_disconnect() before calling usb_disable_device(). This doesn't fix the race for good, but it ensures that the pm runtime worker doesn't call usb_runtime_idle() on the interface that is being removed, and thus avoids the race in the affected code path.

---
This is another interesting situation. As mentioned above, the patch doesn't really fix the race problem. On the other side, fixing it for good would (probably) be much more complex. I still see the race after applying this patch, but it happens maybe once a day vs. several times per hour.

Marked as RFC in the hope that someone has an idea for a better fix. I tried clearing udev->actconfig prior to removing the interfaces in usb_disable_device(), but that alone didn't help; it does not resolve the race condition either, and still results in the crash.

The only clean solution I can think of would be to protect accesses to dev->actconfig with a spinlock or mutex, and to make sure that the lock is held during read accesses and that dev->actconfig is cleared before releasing the lock on write accesses. I'll be happy to do that if it is the way to go, but I would like some feedback before I give it a try.

 drivers/usb/core/hub.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/usb/core/hub.c +9 -0
index 5286bf67869a..5a420657f9f7 100644
@@ -2093,6 +2093,15 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg(&udev->dev, "unregistering device\n");
+
+	/*
+	 * Disable autosuspend before disabling the device, and make sure
+	 * that autosuspend doesn't touch it while it is in the process
+	 * of being deleted.
+	 */
+	usb_disable_autosuspend(udev);
+	pm_runtime_barrier(&udev->dev);
+
 	usb_disable_device(udev, 0);
 	usb_hcd_synchronize_unlinks(udev);
 
Signature · 1 line
2.7.4
#1 lore raw
Quoted 48 lines · Guenter Roeck

While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed.

Unable to handle kernel NULL pointer dereference at virtual address 00000218
pgd = ffffffc00165f000
[00000218] *pgd=000000000174f003, *pud=000000000174f003,
				*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac

ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun

CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507
Hardware name: Google Kevin (DT)
Workqueue: pm pm_runtime_work
task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000
PC is at autosuspend_check+0x74/0x174
LR is at autosuspend_check+0x70/0x174
...
Call trace:
[<ffffffc00080dcc0>] autosuspend_check+0x74/0x174
[<ffffffc000810500>] usb_runtime_idle+0x20/0x40
[<ffffffc000785ae0>] __rpm_callback+0x48/0x7c
[<ffffffc000786af0>] rpm_idle+0x1e8/0x498
[<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

Source:

(gdb) l *0xffffffc00080dcc0
0xffffffc00080dcc0 is in autosuspend_check
(drivers/usb/core/driver.c:1778).
1773 /* We don't need to check interfaces that are
1774 * disabled for runtime PM. Either they are unbound
1775 * or else their drivers don't support autosuspend
1776 * and so they are permanently active.
1777 */
1778 if (intf->dev.power.disable_depth)
1779 continue;
1780 if (atomic_read(&intf->dev.power.usage_count) > 0)
1781 return -EBUSY;
1782 w |= intf->needs_remote_wakeup;

Quoted 7 lines

Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check() and possibly by other callers.

That is an interesting race, one that had previously escaped my notice.

Quoted 17 lines

Explicitly disable autosuspend in usb_disconnect() before calling usb_disable_device(). This doesn't fix the race for good, but it ensures that the pm runtime worker doesn't call usb_runtime_idle() on the interface that is being removed, and thus avoids the race in the affected code path.

---
This is another interesting situation. As mentioned above, the patch doesn't really fix the race problem. On the other side, fixing it for good would (probably) be much more complex. I still see the race after applying this patch, but it happens maybe once a day vs. several times per hour.

Marked as RFC in the hope that someone has an idea for a better fix. I tried clearing udev->actconfig prior to removing the interfaces in usb_disable_device(), but that alone didn't help; it does not resolve the race condition either, and still results in the crash.

Quoted 6 lines

The only clean solution I can think of would be to protect accesses to dev->actconfig with a spinlock or mutex, and to make sure that the lock is held during read accesses and that dev->actconfig is cleared before releasing the lock on write accesses. I'll be happy to do that if it is the way to go, but I would like some feedback before I give it a try.

I think the right thing to do is test udev->state at the start of autosuspend_check(), much like the test at the start of usb_suspend_both(). udev->state gets set to USB_STATE_NOTATTACHED in usb_disconnect() before usb_disable_device() is called.

Then there will be no need for usb_disable_autosuspend(), although pm_runtime_barrier() will still be necessary.

Alan Stern

Quoted 24 lines
 drivers/usb/core/hub.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/usb/core/hub.c +9 -0
index 5286bf67869a..5a420657f9f7 100644
@@ -2093,6 +2093,15 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg(&udev->dev, "unregistering device\n");
+
+	/*
+	 * Disable autosuspend before disabling the device, and make sure
+	 * that autosuspend doesn't touch it while it is in the process
+	 * of being deleted.
+	 */
+	usb_disable_autosuspend(udev);
+	pm_runtime_barrier(&udev->dev);
+
 	usb_disable_device(udev, 0);
 	usb_hcd_synchronize_unlinks(udev);
 
#2 lore raw
Quoted 84 lines · Alan Stern
Quoted 48 lines · Guenter Roeck

While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed.

Unable to handle kernel NULL pointer dereference at virtual address 00000218
pgd = ffffffc00165f000
[00000218] *pgd=000000000174f003, *pud=000000000174f003,
				*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac

ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun

CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507
Hardware name: Google Kevin (DT)
Workqueue: pm pm_runtime_work
task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000
PC is at autosuspend_check+0x74/0x174
LR is at autosuspend_check+0x70/0x174
...
Call trace:
[<ffffffc00080dcc0>] autosuspend_check+0x74/0x174
[<ffffffc000810500>] usb_runtime_idle+0x20/0x40
[<ffffffc000785ae0>] __rpm_callback+0x48/0x7c
[<ffffffc000786af0>] rpm_idle+0x1e8/0x498
[<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40

Source:

(gdb) l *0xffffffc00080dcc0
0xffffffc00080dcc0 is in autosuspend_check
(drivers/usb/core/driver.c:1778).
1773 /* We don't need to check interfaces that are
1774 * disabled for runtime PM. Either they are unbound
1775 * or else their drivers don't support autosuspend
1776 * and so they are permanently active.
1777 */
1778 if (intf->dev.power.disable_depth)
1779 continue;
1780 if (atomic_read(&intf->dev.power.usage_count) > 0)
1781 return -EBUSY;
1782 w |= intf->needs_remote_wakeup;

Quoted 7 lines

Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check() and possibly by other callers.

That is an interesting race, one that had previously escaped my notice.

Quoted 17 lines

Explicitly disable autosuspend in usb_disconnect() before calling usb_disable_device(). This doesn't fix the race for good, but it ensures that the pm runtime worker doesn't call usb_runtime_idle() on the interface that is being removed, and thus avoids the race in the affected code path.

---
This is another interesting situation. As mentioned above, the patch doesn't really fix the race problem. On the other side, fixing it for good would (probably) be much more complex. I still see the race after applying this patch, but it happens maybe once a day vs. several times per hour.

Marked as RFC in the hope that someone has an idea for a better fix. I tried clearing udev->actconfig prior to removing the interfaces in usb_disable_device(), but that alone didn't help; it does not resolve the race condition either, and still results in the crash.

Quoted 6 lines

The only clean solution I can think of would be to protect accesses to dev->actconfig with a spinlock or mutex, and to make sure that the lock is held during read accesses and that dev->actconfig is cleared before releasing the lock on write accesses. I'll be happy to do that if it is the way to go, but I would like some feedback before I give it a try.

Quoted 8 lines

I think the right thing to do is test udev->state at the start of autosuspend_check(), much like the test at the start of usb_suspend_both(). udev->state gets set to USB_STATE_NOTATTACHED in usb_disconnect() before usb_disable_device() is called.

Then there will be no need for usb_disable_autosuspend(), although pm_runtime_barrier() will still be necessary.

Makes sense. I'll give it a try.

Thanks,
Guenter