Skip to contentSkip to conversation

Patch "mmc: sdhci: Disable runtime pm when the sdio_irq is enabled" has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Apr 3, 2017

Subsystems (3)
Stable branch MMC, SD and SDIO Secure digital host controller interface (SDHCI) driver
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

mmc: sdhci: Disable runtime pm when the sdio_irq is enabled

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
mmc-sdhci-disable-runtime-pm-when-the-sdio_irq-is-enabled.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 923713b357455cfb9aca2cd3429cb0806a724ed2 Mon Sep 17 00:00:00 2001

From: Hans de Goede <[email protected]>
Date: Sun, 26 Mar 2017 13:14:45 +0200
Subject: mmc: sdhci: Disable runtime pm when the sdio_irq is enabled

From: Hans de Goede <[email protected]>

commit 923713b357455cfb9aca2cd3429cb0806a724ed2 upstream.

SDIO cards may need clock to send the card interrupt to the host.

On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch pinging the tablet results in:

PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data. 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms

Where as with this patch I get:

PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data. 64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms 64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms 64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms 64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms 64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms 64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms 64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms 64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms 64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms 64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms

Cc Dong Aisheng <[email protected]>
Cc Ian W MORRISON <[email protected]>
Signed-off-by Hans de Goede <[email protected]>
Acked-by Adrian Hunter <[email protected]>
Acked-by Dong Aisheng <[email protected]>
Signed-off-by Ulf Hansson <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/mmc/host/sdhci.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/mmc/host/sdhci.c +6 -0
@@ -1823,6 +1823,9 @@ static void sdhci_enable_sdio_irq(struct
 	struct sdhci_host *host = mmc_priv(mmc);
 	unsigned long flags;
 
+	if (enable)
+		pm_runtime_get_noresume(host->mmc->parent);
+
 	spin_lock_irqsave(&host->lock, flags);
 	if (enable)
 		host->flags |= SDHCI_SDIO_IRQ_ENABLED;

@@ -1831,6 +1834,9 @@ static void sdhci_enable_sdio_irq(struct
 
 	sdhci_enable_sdio_irq_nolock(host, enable);
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (!enable)
+		pm_runtime_put_noidle(host->mmc->parent);
 }
 
 static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/mmc-sdhci-disable-runtime-pm-when-the-sdio_irq-is-enabled.patch