Skip to contentSkip to conversation

Patch "PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller" has been added to the 4.10-stable tree

PATCH [email protected] 1 participant 1 message Apr 9, 2017

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller

to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
pci-thunder-pem-add-legacy-firmware-support-for-cavium-thunderx-host-controller.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 9abb27c7594a62bbf6385e20b7f5a90b4eceae2f Mon Sep 17 00:00:00 2001

From: Tomasz Nowicki <[email protected]>
Date: Thu, 23 Mar 2017 17:10:16 -0500
Subject: PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller

From: Tomasz Nowicki <[email protected]>

commit 9abb27c7594a62bbf6385e20b7f5a90b4eceae2f upstream.

During early days of PCI quirks support, ThunderX firmware did not provide PNP0c02 node with PCI configuration space and PEM-specific register ranges. This means that for legacy FW we are not reserving these resources and cannot gather PEM-specific resources for further PEM initialization.

To support already deployed legacy FW, calculate PEM-specific ranges and provide resources reservation as fallback scenario into PEM driver when we could not gather PEM reg base from ACPI tables.

---
 drivers/pci/host/pci-thunder-pem.c |   56 +++++++++++++++++++++++++++++++++++--
 1 file changed, 54 insertions(+), 2 deletions(-)
drivers/pci/host/pci-thunder-pem.c +54 -2
@@ -14,6 +14,7 @@
  * Copyright (C) 2015 - 2016 Cavium, Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -319,6 +320,50 @@ static int thunder_pem_init(struct devic
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 
+#define PEM_RES_BASE		0x87e0c0000000UL
+#define PEM_NODE_MASK		GENMASK(45, 44)
+#define PEM_INDX_MASK		GENMASK(26, 24)
+#define PEM_MIN_DOM_IN_NODE	4
+#define PEM_MAX_DOM_IN_NODE	10
+
+static void thunder_pem_reserve_range(struct device *dev, int seg,
+				      struct resource *r)
+{
+	resource_size_t start = r->start, end = r->end;
+	struct resource *res;
+	const char *regionid;
+
+	regionid = kasprintf(GFP_KERNEL, "PEM RC:%d", seg);
+	if (!regionid)
+		return;
+
+	res = request_mem_region(start, end - start + 1, regionid);
+	if (res)
+		res->flags &= ~IORESOURCE_BUSY;
+	else
+		kfree(regionid);
+
+	dev_info(dev, "%pR %s reserved\n", r,
+		 res ? "has been" : "could not be");
+}
+
+static void thunder_pem_legacy_fw(struct acpi_pci_root *root,
+				 struct resource *res_pem)
+{
+	int node = acpi_get_node(root->device->handle);
+	int index;
+
+	if (node == NUMA_NO_NODE)
+		node = 0;
+
+	index = root->segment - PEM_MIN_DOM_IN_NODE;
+	index -= node * PEM_MAX_DOM_IN_NODE;
+	res_pem->start = PEM_RES_BASE | FIELD_PREP(PEM_NODE_MASK, node) |
+					FIELD_PREP(PEM_INDX_MASK, index);
+	res_pem->end = res_pem->start + SZ_16M - 1;
+	res_pem->flags = IORESOURCE_MEM;
+}
+
 static int thunder_pem_acpi_init(struct pci_config_window *cfg)
 {
 	struct device *dev = cfg->parent;
@@ -332,9 +377,16 @@ static int thunder_pem_acpi_init(struct
 		return -ENOMEM;
 
 	ret = acpi_get_rc_resources(dev, "CAVA02B", root->segment, res_pem);
+
+	/*
+	 * If we fail to gather resources it means that we run with old
+	 * FW where we need to calculate PEM-specific resources manually.
+	 */
 	if (ret) {
-		dev_err(dev, "can't get rc base address\n");
-		return ret;
+		thunder_pem_legacy_fw(root, res_pem);
+		/* Reserve PEM-specific resources and PCI configuration space */
+		thunder_pem_reserve_range(dev, root->segment, res_pem);
+		thunder_pem_reserve_range(dev, root->segment, &cfg->res);
 	}
 
 	return thunder_pem_init(dev, cfg, res_pem);

Patches currently in stable-queue which might be from [email protected] are

queue-4.10/pci-thunder-pem-add-legacy-firmware-support-for-cavium-thunderx-host-controller.patch queue-4.10/pci-thunder-pem-fix-legacy-firmware-pem-specific-resources.patch