dell-laptop: Adds support for keyboard backlight timeout AC settings
PATCH 1/1 dell-laptop: Adds support for keyboard backlight timeout AC settings
When changing keyboard backlight state on new Dell laptops, firmware expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed leds dell::kbd_backlight: Setting an LED's brightness failed (-6)
This patch adds support for retrieving current timeout AC values and also updating them. Current timeout value in sysfs is displayed based on current AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by checking existence of Keyboard Backlight with AC SMBIOS token (0x0451).
---
I have not tested this patch yet as I do not have affected machine. I would appreciate some testing of this patch on more new Dell laptops. Without this patch changing keyboard backlight is not possible on affected machines.
--- drivers/platform/x86/dell-laptop.c | 59 ++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 6 deletions(-)
drivers/platform/x86/dell-laptop.c +53 -6
@@ -42,6 +42,7 @@#define KBD_LED_AUTO_50_TOKEN 0x02EB#define KBD_LED_AUTO_75_TOKEN 0x02EC#define KBD_LED_AUTO_100_TOKEN 0x02F6 +#define KBD_LED_AC_TOKEN 0x0451struct quirk_entry {u8 touchpad_led;
@@ -1024,7 +1025,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbRES2, byte3 Current Timeout +* cbRES2, byte3 Current Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes
@@ -1036,6 +1037,15 @@ static void touchpad_led_exit(void)* cbRES3, byte0 Current setting of ALS value that turns the light on or off. * cbRES3, byte1 Current ALS reading * cbRES3, byte2 Current keyboard light level. +* cbRES3, byte3 Current timeout on AC Power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* Bits 5:0 Timeout value (0-63) in sec/min/hr/day +* NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte2 +* are set upon return from the upon return from the [Get Feature information] call. * * cbArg1 0x2 = Set New State * cbRES1 Standard return codes (0, -1, -2)
@@ -1058,7 +1068,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbArg2, byte3 Desired Timeout +* cbArg2, byte3 Desired Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes
@@ -1067,6 +1077,13 @@ static void touchpad_led_exit(void)* bits 5:0 Timeout value (0-63) in sec/min/hr/day * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. * cbArg3, byte2 Desired keyboard light level. +* cbArg3, byte3 Desired Timeout on AC power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* bits 5:0 Timeout value (0-63) in sec/min/hr/day */
@@ -1112,6 +1129,8 @@ struct kbd_state {u8 triggers;u8 timeout_value;u8 timeout_unit; +u8 timeout_value_ac; +u8 timeout_unit_ac;u8 als_setting;u8 als_value;u8 level;
@@ -1131,6 +1150,7 @@ struct kbd_state {static struct kbd_info kbd_info;static bool kbd_als_supported;static bool kbd_triggers_supported; +static bool kbd_timeout_ac_supported;static u8 kbd_mode_levels[16 ];static int kbd_mode_levels_count;
@@ -1269,6 +1289,8 @@ static int kbd_get_state(struct kbd_state *state) state->als_setting = buffer->output[2 ] &0xFF ; state->als_value = (buffer->output[2 ] >>8 ) &0xFF ; state->level = (buffer->output[2 ] >>16 ) &0xFF ; + state->timeout_value_ac = (buffer->output[2 ] >>24 ) &0x3F ; + state->timeout_unit_ac = (buffer->output[2 ] >>30 ) &0x3 ; out:dell_smbios_release_buffer ();
@@ -1288,6 +1310,8 @@ static int kbd_set_state(struct kbd_state *state) buffer->input[1 ] |= (state->timeout_unit &0x3 ) <<30 ; buffer->input[2 ] = state->als_setting &0xFF ; buffer->input[2 ] |= (state->level &0xFF ) <<16 ; + buffer->input[2 ] |= (state->timeout_value_ac &0x3F ) <<24 ; + buffer->input[2 ] |= (state->timeout_unit_ac &0x3 ) <<30 ;dell_smbios_send_request (4 ,11 ); ret = buffer->output[0 ];dell_smbios_release_buffer ();
@@ -1394,6 +1418,13 @@ static inline int kbd_init_info(void)if (ret)return ret; +/* NOTE: Old models without KBD_LED_AC_TOKEN token supports only one +* timeout value which is shared for both battery and AC power +* settings. So do not try to set AC values on old models. +*/ +if (dell_smbios_find_token (KBD_LED_AC_TOKEN )) + kbd_timeout_ac_supported = true; +kbd_get_state (&state);/* NOTE: timeout value is stored in 6 bits so max value is 63 */
@@ -1573,8 +1604,14 @@ static ssize_t kbd_led_timeout_store(struct device *dev,return ret; new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; + +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + new_state.timeout_value_ac = value; + new_state.timeout_unit_ac = unit; + }else { + new_state.timeout_value = value; + new_state.timeout_unit = unit; + } ret =kbd_set_state_safe (&new_state, &state);if (ret)
@@ -1587,16 +1624,26 @@ static ssize_t kbd_led_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { struct kbd_state state; +int value;int ret;int len; +u8 unit; ret =kbd_get_state (&state);if (ret)return ret; - len =sprintf (buf,"%d" , state.timeout_value); +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + value = state.timeout_value_ac; + unit = state.timeout_unit_ac; + }else { + value = state.timeout_value; + unit = state.timeout_unit; + } + + len =sprintf (buf,"%d" , value); -switch (state.timeout_unit) { +switch (unit) {case KBD_TIMEOUT_SECONDS :return len +sprintf (buf+len,"s\n" );case KBD_TIMEOUT_MINUTES :
Signature · 1 line
1.7.9.5
I've tested the patch over 4.10.10 on Fedora 25 and it works both on and off AC power on Dell Precision 7510. Thanks a lot!
Quoted 180 lines · Pali Rohár
When changing keyboard backlight state on new Dell laptops, firmware expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed ledsdell::kbd_backlight: Setting an LED's brightness failed (-6)This patch adds support for retrieving current timeout AC values and also updating them. Current timeout value in sysfs is displayed based on current AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by checking existence of Keyboard Backlight with AC SMBIOS token (
0x0451).Signed-off-by Pali Rohár <[email protected]>---
I have not tested this patch yet as I do not have affected machine. I would appreciate some testing of this patch on more new Dell laptops. Without this patch changing keyboard backlight is not possible on affected machines.--- drivers/platform/x86/dell-laptop.c | 59 ++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 6 deletions(-)drivers/platform/x86/dell-laptop.c +53
-6@@ -42,6 +42,7 @@#define KBD_LED_AUTO_50_TOKEN 0x02EB#define KBD_LED_AUTO_75_TOKEN 0x02EC#define KBD_LED_AUTO_100_TOKEN 0x02F6 +#define KBD_LED_AC_TOKEN 0x0451struct quirk_entry {u8 touchpad_led;@@ -1024,7 +1025,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbRES2, byte3 Current Timeout +* cbRES2, byte3 Current Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1036,6 +1037,15 @@ static void touchpad_led_exit(void)* cbRES3, byte0 Current setting of ALS value that turns the light on or off. * cbRES3, byte1 Current ALS reading * cbRES3, byte2 Current keyboard light level. +* cbRES3, byte3 Current timeout on AC Power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* Bits 5:0 Timeout value (0-63) in sec/min/hr/day +* NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte2 +* are set upon return from the upon return from the [Get Feature information] call. * * cbArg1 0x2 = Set New State * cbRES1 Standard return codes (0, -1, -2) @@ -1058,7 +1068,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbArg2, byte3 Desired Timeout +* cbArg2, byte3 Desired Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1067,6 +1077,13 @@ static void touchpad_led_exit(void)* bits 5:0 Timeout value (0-63) in sec/min/hr/day * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. * cbArg3, byte2 Desired keyboard light level. +* cbArg3, byte3 Desired Timeout on AC power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* bits 5:0 Timeout value (0-63) in sec/min/hr/day */ @@ -1112,6 +1129,8 @@ struct kbd_state {u8 triggers;u8 timeout_value;u8 timeout_unit; +u8 timeout_value_ac; +u8 timeout_unit_ac;u8 als_setting;u8 als_value;u8 level;@@ -1131,6 +1150,7 @@ struct kbd_state {static struct kbd_info kbd_info;static bool kbd_als_supported;static bool kbd_triggers_supported; +static bool kbd_timeout_ac_supported;static u8 kbd_mode_levels[16 ];static int kbd_mode_levels_count;@@ -1269,6 +1289,8 @@ static int kbd_get_state(struct kbd_state *state) state->als_setting = buffer->output[2 ] &0xFF ; state->als_value = (buffer->output[2 ] >>8 ) &0xFF ; state->level = (buffer->output[2 ] >>16 ) &0xFF ; + state->timeout_value_ac = (buffer->output[2 ] >>24 ) &0x3F ; + state->timeout_unit_ac = (buffer->output[2 ] >>30 ) &0x3 ; out:dell_smbios_release_buffer ();@@ -1288,6 +1310,8 @@ static int kbd_set_state(struct kbd_state *state) buffer->input[1 ] |= (state->timeout_unit &0x3 ) <<30 ; buffer->input[2 ] = state->als_setting &0xFF ; buffer->input[2 ] |= (state->level &0xFF ) <<16 ; + buffer->input[2 ] |= (state->timeout_value_ac &0x3F ) <<24 ; + buffer->input[2 ] |= (state->timeout_unit_ac &0x3 ) <<30 ;dell_smbios_send_request (4 ,11 ); ret = buffer->output[0 ];dell_smbios_release_buffer ();@@ -1394,6 +1418,13 @@ static inline int kbd_init_info(void)if (ret)return ret; +/* NOTE: Old models without KBD_LED_AC_TOKEN token supports only one +* timeout value which is shared for both battery and AC power +* settings. So do not try to set AC values on old models. +*/ +if (dell_smbios_find_token (KBD_LED_AC_TOKEN )) + kbd_timeout_ac_supported = true; +kbd_get_state (&state);/* NOTE: timeout value is stored in 6 bits so max value is 63 */ @@ -1573,8 +1604,14 @@ static ssize_t kbd_led_timeout_store(struct device *dev,return ret; new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; + +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + new_state.timeout_value_ac = value; + new_state.timeout_unit_ac = unit; + }else { + new_state.timeout_value = value; + new_state.timeout_unit = unit; + } ret =kbd_set_state_safe (&new_state, &state);if (ret)@@ -1587,16 +1624,26 @@ static ssize_t kbd_led_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { struct kbd_state state; +int value;int ret;int len; +u8 unit; ret =kbd_get_state (&state);if (ret)return ret; - len =sprintf (buf,"%d" , state.timeout_value); +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + value = state.timeout_value_ac; + unit = state.timeout_unit_ac; + }else { + value = state.timeout_value; + unit = state.timeout_unit; + } + + len =sprintf (buf,"%d" , value); -switch (state.timeout_unit) { +switch (unit) {case KBD_TIMEOUT_SECONDS :return len +sprintf (buf+len,"s\n" );case KBD_TIMEOUT_MINUTES :
Signature · 3 lines
Arcadiy Ivanov [email protected] | @arcivanov | https://ivanov.biz https://github.com/arcivanov
[email protected]
Acked-byQuoted 197 lines
-----Original Message-----
From: Arcadiy Ivanov [mailto:[email protected]]
Sent: Sunday, April 23, 2017 3:30 PM
To: Pali Rohár <[email protected]>; Matthew Garrett <[email protected]>; Darren Hart <[email protected]>; Andy Shevchenko <[email protected]>; Limonciello, Mario <[email protected]>
Cc: [email protected]; [email protected]
Subject: Re: [PATCH] dell-laptop: Adds support for keyboard backlight timeout AC settingsI've tested the patch over 4.10.10 on Fedora 25 and it works both on and off AC power on Dell Precision 7510.
Thanks a lot!Quoted 16 lines · Pali Rohár
When changing keyboard backlight state on new Dell laptops, firmware expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed ledsdell::kbd_backlight: Setting an LED's brightness failed (-6)This patch adds support for retrieving current timeout AC values and also updating them. Current timeout value in sysfs is displayed based on current AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by checking existence of Keyboard Backlight with AC SMBIOS token (
0x0451).Quoted 7 lines
Signed-off-by Pali Rohár <[email protected]>---
I have not tested this patch yet as I do not have affected machine. I would appreciate some testing of this patch on more new Dell laptops. Without this patch changing keyboard backlight is not possible on affected machines.--- drivers/platform/x86/dell-laptop.c | 59 ++++++++++++++++++++++++++++++++----
drivers/platform/x86/dell-
Quoted 3 lines
1 file changed, 53 insertions(+), 6 deletions(-)drivers/platform/x86/dell- renamed from drivers/platform/x86/dell-laptop.c +0
-0
laptop.cQuoted 23 lines
index f57dd28..cddf3c2 100644
drivers/platform/x86/dell-laptop.c +2
-1@@ -42,6 +42,7 @@#define KBD_LED_AUTO_50_TOKEN 0x02EB#define KBD_LED_AUTO_75_TOKEN 0x02EC#define KBD_LED_AUTO_100_TOKEN 0x02F6 +#define KBD_LED_AC_TOKEN 0x0451struct quirk_entry {u8 touchpad_led;@@ -1024,7 +1025,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbRES2, byte3 Current Timeout +* cbRES2, byte3 Current Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1036,6 +1037,15 @@ static void touchpad_led_exit(void)* cbRES3, byte0 Current setting of ALS value that turns the light on or off. * cbRES3, byte1 Current ALS reading drivers/platform/x86/dell-laptop.c static void touchpad_led_exit(void) · line 1048
Quoted 10 lines
drivers/platform/x86/dell-laptop.c +9
-0* cbRES3, byte2 Current keyboard light level. +* cbRES3, byte3 Current timeout on AC Power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* Bits 5:0 Timeout value (0-63) in sec/min/hr/day +* NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte2 +* are set upon return from the upon return from the [Get Feature information] call.
drivers/platform/x86/dell-laptop.c static ssize_t kbd_led_timeout_store(struct device
Quoted 76 lines
drivers/platform/x86/dell-laptop.c +22
-1* * cbArg1 0x2 = Set New State * cbRES1 Standard return codes (0, -1, -2) @@ -1058,7 +1068,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbArg2, byte3 Desired Timeout +* cbArg2, byte3 Desired Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1067,6 +1077,13 @@ static void touchpad_led_exit(void)* bits 5:0 Timeout value (0-63) in sec/min/hr/day * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. * cbArg3, byte2 Desired keyboard light level. +* cbArg3, byte3 Desired Timeout on AC power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* bits 5:0 Timeout value (0-63) in sec/min/hr/day */ @@ -1112,6 +1129,8 @@ struct kbd_state {u8 triggers;u8 timeout_value;u8 timeout_unit; +u8 timeout_value_ac; +u8 timeout_unit_ac;u8 als_setting;u8 als_value;u8 level;@@ -1131,6 +1150,7 @@ struct kbd_state {static struct kbd_info kbd_info;static bool kbd_als_supported;static bool kbd_triggers_supported; +static bool kbd_timeout_ac_supported;static u8 kbd_mode_levels[16 ];static int kbd_mode_levels_count;@@ -1269,6 +1289,8 @@ static int kbd_get_state(struct kbd_state *state) state->als_setting = buffer->output[2 ] &0xFF ; state->als_value = (buffer->output[2 ] >>8 ) &0xFF ; state->level = (buffer->output[2 ] >>16 ) &0xFF ; + state->timeout_value_ac = (buffer->output[2 ] >>24 ) &0x3F ; + state->timeout_unit_ac = (buffer->output[2 ] >>30 ) &0x3 ; out:dell_smbios_release_buffer ();@@ -1288,6 +1310,8 @@ static int kbd_set_state(struct kbd_state *state) buffer->input[1 ] |= (state->timeout_unit &0x3 ) <<30 ; buffer->input[2 ] = state->als_setting &0xFF ; buffer->input[2 ] |= (state->level &0xFF ) <<16 ; + buffer->input[2 ] |= (state->timeout_value_ac &0x3F ) <<24 ; + buffer->input[2 ] |= (state->timeout_unit_ac &0x3 ) <<30 ;dell_smbios_send_request (4 ,11 ); ret = buffer->output[0 ];dell_smbios_release_buffer ();@@ -1394,6 +1418,13 @@ static inline int kbd_init_info(void)if (ret)return ret; +/* NOTE: Old models without KBD_LED_AC_TOKEN token supports only one +* timeout value which is shared for both battery and AC power +* settings. So do not try to set AC values on old models. +*/ +if (dell_smbios_find_token (KBD_LED_AC_TOKEN )) + kbd_timeout_ac_supported = true; +kbd_get_state (&state);/* NOTE: timeout value is stored in 6 bits so max value is 63 */ @@ -1573,8 +1604,14 @@ static ssize_t kbd_led_timeout_store(struct device*dev,
drivers/platform/x86/dell-laptop.c static ssize_t kbd_led_timeout_store(struct device *dev,
Quoted 7 lines
drivers/platform/x86/dell-laptop.c +2
-2return ret; new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; + +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ){
drivers/platform/x86/dell-laptop.c static ssize_t kbd_led_timeout_show(struct device
Quoted 10 lines
drivers/platform/x86/dell-laptop.c +6
-0+ new_state.timeout_value_ac = value; + new_state.timeout_unit_ac = unit; + }else { + new_state.timeout_value = value; + new_state.timeout_unit = unit; + } ret =kbd_set_state_safe (&new_state, &state);if (ret)@@ -1587,16 +1624,26 @@ static ssize_t kbd_led_timeout_show(struct device*dev,
Quoted 4 lines
drivers/platform/x86/dell-laptop.c +1
-0struct device_attribute *attr, char *buf) { struct kbd_state state; +int value;drivers/platform/x86/dell-laptop.c static ssize_t kbd_led_timeout_show(struct device *dev,
Quoted 10 lines
drivers/platform/x86/dell-laptop.c +2
-1int ret;int len; +u8 unit; ret =kbd_get_state (&state);if (ret)return ret; - len =sprintf (buf,"%d" , state.timeout_value); +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ){
Quoted 9 lines
drivers/platform/x86/dell-laptop.c +8
-0+ value = state.timeout_value_ac; + unit = state.timeout_unit_ac; + }else { + value = state.timeout_value; + unit = state.timeout_unit; + } + + len =sprintf (buf,"%d" , value);
Quoted 12 lines
drivers/platform/x86/dell-laptop.c static ssize_t kbd_led_timeout_show(struct device *dev, · line 1649
Quoted 5 lines
drivers/platform/x86/dell-laptop.c +1
-1-switch (state.timeout_unit) { +switch (unit) {case KBD_TIMEOUT_SECONDS :return len +sprintf (buf+len,"s\n" );case KBD_TIMEOUT_MINUTES :--
Arcadiy Ivanov
[email protected] | @arcivanov | https://ivanov.biz
https://github.com/arcivanov
Arcadiy, Pali, thanks for this quick turnaround! This looks good to me. I've passed it to my internal team for any other feedback.
Quoted 9 lines · Pali Rohár
When changing keyboard backlight state on new Dell laptops, firmware expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed ledsdell::kbd_backlight: Setting an LED's brightness failed (-6)
Quoted 8 lines
This patch adds support for retrieving current timeout AC values and also updating them. Current timeout value in sysfs is displayed based on current AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by checking existence of Keyboard Backlight with AC SMBIOS token (
0x0451).Signed-off-by Pali Rohár <[email protected]>
What base did you use for that?
This patch misses few others that were applied to our testing / for-next.
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Quoted 166 lines
---
I have not tested this patch yet as I do not have affected machine. I would appreciate some testing of this patch on more new Dell laptops. Without this patch changing keyboard backlight is not possible on affected machines.--- drivers/platform/x86/dell-laptop.c | 59 ++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 6 deletions(-)drivers/platform/x86/dell-laptop.c +53
-7@@ -42,6 +42,7 @@#define KBD_LED_AUTO_50_TOKEN 0x02EB#define KBD_LED_AUTO_75_TOKEN 0x02EC#define KBD_LED_AUTO_100_TOKEN 0x02F6 +#define KBD_LED_AC_TOKEN 0x0451struct quirk_entry {u8 touchpad_led;@@ -1024,7 +1025,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbRES2, byte3 Current Timeout +* cbRES2, byte3 Current Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1036,6 +1037,15 @@ static void touchpad_led_exit(void)* cbRES3, byte0 Current setting of ALS value that turns the light on or off. * cbRES3, byte1 Current ALS reading * cbRES3, byte2 Current keyboard light level. +* cbRES3, byte3 Current timeout on AC Power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* Bits 5:0 Timeout value (0-63) in sec/min/hr/day +* NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte2 +* are set upon return from the upon return from the [Get Feature information] call. * * cbArg1 0x2 = Set New State * cbRES1 Standard return codes (0, -1, -2) @@ -1058,7 +1068,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbArg2, byte3 Desired Timeout +* cbArg2, byte3 Desired Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1067,6 +1077,13 @@ static void touchpad_led_exit(void)* bits 5:0 Timeout value (0-63) in sec/min/hr/day * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. * cbArg3, byte2 Desired keyboard light level. +* cbArg3, byte3 Desired Timeout on AC power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* bits 5:0 Timeout value (0-63) in sec/min/hr/day */ @@ -1112,6 +1129,8 @@ struct kbd_state {u8 triggers;u8 timeout_value;u8 timeout_unit; +u8 timeout_value_ac; +u8 timeout_unit_ac;u8 als_setting;u8 als_value;u8 level;@@ -1131,6 +1150,7 @@ struct kbd_state {static struct kbd_info kbd_info;static bool kbd_als_supported;static bool kbd_triggers_supported; +static bool kbd_timeout_ac_supported;static u8 kbd_mode_levels[16 ];static int kbd_mode_levels_count;@@ -1269,6 +1289,8 @@ static int kbd_get_state(struct kbd_state *state) state->als_setting = buffer->output[2 ] &0xFF ; state->als_value = (buffer->output[2 ] >>8 ) &0xFF ; state->level = (buffer->output[2 ] >>16 ) &0xFF ; + state->timeout_value_ac = (buffer->output[2 ] >>24 ) &0x3F ; + state->timeout_unit_ac = (buffer->output[2 ] >>30 ) &0x3 ; out:dell_smbios_release_buffer ();@@ -1288,6 +1310,8 @@ static int kbd_set_state(struct kbd_state *state) buffer->input[1 ] |= (state->timeout_unit &0x3 ) <<30 ; buffer->input[2 ] = state->als_setting &0xFF ; buffer->input[2 ] |= (state->level &0xFF ) <<16 ; + buffer->input[2 ] |= (state->timeout_value_ac &0x3F ) <<24 ; + buffer->input[2 ] |= (state->timeout_unit_ac &0x3 ) <<30 ;dell_smbios_send_request (4 ,11 ); ret = buffer->output[0 ];dell_smbios_release_buffer ();@@ -1394,6 +1418,13 @@ static inline int kbd_init_info(void)if (ret)return ret; +/* NOTE: Old models without KBD_LED_AC_TOKEN token supports only one +* timeout value which is shared for both battery and AC power +* settings. So do not try to set AC values on old models. +*/ +if (dell_smbios_find_token (KBD_LED_AC_TOKEN )) + kbd_timeout_ac_supported = true; +kbd_get_state (&state);/* NOTE: timeout value is stored in 6 bits so max value is 63 */ @@ -1573,8 +1604,14 @@ static ssize_t kbd_led_timeout_store(struct device *dev,return ret; new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; + +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + new_state.timeout_value_ac = value; + new_state.timeout_unit_ac = unit; + }else { + new_state.timeout_value = value; + new_state.timeout_unit = unit; + } ret =kbd_set_state_safe (&new_state, &state);if (ret)@@ -1587,16 +1624,26 @@ static ssize_t kbd_led_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { struct kbd_state state; +int value;int ret;int len; +u8 unit; ret =kbd_get_state (&state);if (ret)return ret; - len =sprintf (buf,"%d" , state.timeout_value); +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + value = state.timeout_value_ac; + unit = state.timeout_unit_ac; + }else { + value = state.timeout_value; + unit = state.timeout_unit; + } + + len =sprintf (buf,"%d" , value); -switch (state.timeout_unit) { +switch (unit) {case KBD_TIMEOUT_SECONDS :return len +sprintf (buf+len,"s\n" );case KBD_TIMEOUT_MINUTES : --1.7.9.5
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 14 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
Quoted 13 lines · Pali Rohár
When changing keyboard backlight state on new Dell laptops, firmware expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed ledsdell::kbd_backlight: Setting an LED's brightness failed (-6)This patch adds support for retrieving current timeout AC values and also updating them. Current timeout value in sysfs is displayed based on current AC status, like current display brightness value.
Quoted 6 lines
Quoted 4 lines
Detection if Dell laptop supports or not new timeout AC settings is done by checking existence of Keyboard Backlight with AC SMBIOS token (
0x0451).Signed-off-by Pali Rohár <[email protected]>What base did you use for that?
Current linus master at the time of sending patch.
Quoted 1 line
This patch misses few others that were applied to our testing / for-next.
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Quoted 169 lines
Quoted 166 lines
---
I have not tested this patch yet as I do not have affected machine. I would appreciate some testing of this patch on more new Dell laptops. Without this patch changing keyboard backlight is not possible on affected machines.--- drivers/platform/x86/dell-laptop.c | 59 ++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 6 deletions(-)drivers/platform/x86/dell-laptop.c +53
-7@@ -42,6 +42,7 @@#define KBD_LED_AUTO_50_TOKEN 0x02EB#define KBD_LED_AUTO_75_TOKEN 0x02EC#define KBD_LED_AUTO_100_TOKEN 0x02F6 +#define KBD_LED_AC_TOKEN 0x0451struct quirk_entry {u8 touchpad_led;@@ -1024,7 +1025,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbRES2, byte3 Current Timeout +* cbRES2, byte3 Current Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1036,6 +1037,15 @@ static void touchpad_led_exit(void)* cbRES3, byte0 Current setting of ALS value that turns the light on or off. * cbRES3, byte1 Current ALS reading * cbRES3, byte2 Current keyboard light level. +* cbRES3, byte3 Current timeout on AC Power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* Bits 5:0 Timeout value (0-63) in sec/min/hr/day +* NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte2 +* are set upon return from the upon return from the [Get Feature information] call. * * cbArg1 0x2 = Set New State * cbRES1 Standard return codes (0, -1, -2) @@ -1058,7 +1068,7 @@ static void touchpad_led_exit(void)* bit 2 Pointing stick * bit 3 Any mouse * bits 4-7 Reserved for future use -* cbArg2, byte3 Desired Timeout +* cbArg2, byte3 Desired Timeout on battery * bits 7:6 Timeout units indicator: * 00b Seconds * 01b Minutes @@ -1067,6 +1077,13 @@ static void touchpad_led_exit(void)* bits 5:0 Timeout value (0-63) in sec/min/hr/day * cbArg3, byte0 Desired setting of ALS value that turns the light on or off. * cbArg3, byte2 Desired keyboard light level. +* cbArg3, byte3 Desired Timeout on AC power +* bits 7:6 Timeout units indicator: +* 00b Seconds +* 01b Minutes +* 10b Hours +* 11b Days +* bits 5:0 Timeout value (0-63) in sec/min/hr/day */ @@ -1112,6 +1129,8 @@ struct kbd_state {u8 triggers;u8 timeout_value;u8 timeout_unit; +u8 timeout_value_ac; +u8 timeout_unit_ac;u8 als_setting;u8 als_value;u8 level;@@ -1131,6 +1150,7 @@ struct kbd_state {static struct kbd_info kbd_info;static bool kbd_als_supported;static bool kbd_triggers_supported; +static bool kbd_timeout_ac_supported;static u8 kbd_mode_levels[16 ];static int kbd_mode_levels_count;@@ -1269,6 +1289,8 @@ static int kbd_get_state(struct kbd_state *state) state->als_setting = buffer->output[2 ] &0xFF ; state->als_value = (buffer->output[2 ] >>8 ) &0xFF ; state->level = (buffer->output[2 ] >>16 ) &0xFF ; + state->timeout_value_ac = (buffer->output[2 ] >>24 ) &0x3F ; + state->timeout_unit_ac = (buffer->output[2 ] >>30 ) &0x3 ; out:dell_smbios_release_buffer ();@@ -1288,6 +1310,8 @@ static int kbd_set_state(struct kbd_state *state) buffer->input[1 ] |= (state->timeout_unit &0x3 ) <<30 ; buffer->input[2 ] = state->als_setting &0xFF ; buffer->input[2 ] |= (state->level &0xFF ) <<16 ; + buffer->input[2 ] |= (state->timeout_value_ac &0x3F ) <<24 ; + buffer->input[2 ] |= (state->timeout_unit_ac &0x3 ) <<30 ;dell_smbios_send_request (4 ,11 ); ret = buffer->output[0 ];dell_smbios_release_buffer ();@@ -1394,6 +1418,13 @@ static inline int kbd_init_info(void)if (ret)return ret; +/* NOTE: Old models without KBD_LED_AC_TOKEN token supports only one +* timeout value which is shared for both battery and AC power +* settings. So do not try to set AC values on old models. +*/ +if (dell_smbios_find_token (KBD_LED_AC_TOKEN )) + kbd_timeout_ac_supported = true; +kbd_get_state (&state);/* NOTE: timeout value is stored in 6 bits so max value is 63 */ @@ -1573,8 +1604,14 @@ static ssize_t kbd_led_timeout_store(struct device *dev,return ret; new_state = state; - new_state.timeout_value = value; - new_state.timeout_unit = unit; + +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + new_state.timeout_value_ac = value; + new_state.timeout_unit_ac = unit; + }else { + new_state.timeout_value = value; + new_state.timeout_unit = unit; + } ret =kbd_set_state_safe (&new_state, &state);if (ret)@@ -1587,16 +1624,26 @@ static ssize_t kbd_led_timeout_show(struct device *dev, struct device_attribute *attr, char *buf) { struct kbd_state state; +int value;int ret;int len; +u8 unit; ret =kbd_get_state (&state);if (ret)return ret; - len =sprintf (buf,"%d" , state.timeout_value); +if (kbd_timeout_ac_supported &&power_supply_is_system_supplied () >0 ) { + value = state.timeout_value_ac; + unit = state.timeout_unit_ac; + }else { + value = state.timeout_value; + unit = state.timeout_unit; + } + + len =sprintf (buf,"%d" , value); -switch (state.timeout_unit) { +switch (unit) {case KBD_TIMEOUT_SECONDS :return len +sprintf (buf+len,"s\n" );case KBD_TIMEOUT_MINUTES : --1.7.9.5
Signature · 2 lines
Pali Rohár [email protected]
Quoted 5 lines · Pali Rohár
Quoted 3 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.
Quoted 7 lines
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 9 lines · On Tuesday 25 April 2017 16:32:36 Andy Shevchenko wrote:
Quoted 8 lines · Pali Rohár
Quoted 3 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
It is OK.
Signature · 2 lines
Pali Rohár [email protected]
Quoted 25 lines
-----Original Message-----
From: Pali Rohár [mailto:[email protected]]
Sent: Tuesday, April 25, 2017 8:41 AM
To: Andy Shevchenko <[email protected]>
Cc: Matthew Garrett <[email protected]>; Darren Hart <[email protected]>; Andy Shevchenko <[email protected]>; Arcadiy Ivanov <[email protected]>; Limonciello, Mario <[email protected]>; Platform Driver <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] dell-laptop: Adds support for keyboard backlight timeout AC settingsQuoted 12 lines · On Tuesday 25 April 2017 16:32:36 Andy Shevchenko wrote:
Quoted 11 lines · Pali Rohár
Quoted 3 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
It is OK.
Pali,
Considering this is negatively affecting folks on stable kernel releases too when using this newer HW, would you consider to send to @stable too?
Thanks,
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 30 lines · Arcadiy Ivanov
Quoted 29 lines · On 2017-04-25 09:49, [email protected] wrote:
Quoted 29 lines
-----Original Message-----
From: Pali Rohár [mailto:[email protected]]
Sent: Tuesday, April 25, 2017 8:41 AM
To: Andy Shevchenko <[email protected]>
Cc: Matthew Garrett <[email protected]>; Darren Hart <[email protected]>; Andy Shevchenko <[email protected]>; Arcadiy Ivanov <[email protected]>; Limonciello, Mario <[email protected]>; Platform Driver <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] dell-laptop: Adds support for keyboard backlight timeout AC settingsQuoted 4 lines · On Tuesday 25 April 2017 16:32:36 Andy Shevchenko wrote:
Quoted 3 lines · Pali Rohár
Quoted 2 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.Quoted 8 lines
Quoted 6 lines
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
It is OK.
Quoted 9 lines
Quoted 6 lines
Pali,
Considering this is negatively affecting folks on stable kernel releases too when using this newer HW, would you consider to send to @stable too?
Thanks,
I second that. Thanks!
In order for this to go back to stable, we will need to include the list of dependencies per stable-kernel-rules.txt. This can be done after it is merged, but if you can provide the set of Cc: stable lines needed, we can look at getting this into testing now so no further action will be required.
...
Upon closer inspection, this does fail the 100 lines including context stable rule by an additional 55 lines. This is a process issue I've been thinking about for a while and trying to find the best way to express this problem and what a viable solution might look like. As it stands, fixes such as these are effectively limited to current and future kernel versions. I do think there is a need for vendors to be able to update their drivers upstream to work with current hardware without requiring a bleeding edge kernel. Perhaps "leaf node drivers" should have a looser set of stable rules, but that is not currently the way the upstream stable kernel rules work (at least as far as I understand them).
+Greg KH who has the ultimate say on this. Greg, have I misrepresented anything here?
Signature · 2 lines
Darren Hart VMware Open Source Technology Center
Quoted 29 lines · On Wednesday 26 April 2017 15:40:49 Darren Hart wrote:
Quoted 28 lines · Arcadiy Ivanov
Quoted 27 lines · On 2017-04-25 09:49, [email protected] wrote:
Quoted 27 lines
-----Original Message-----
From: Pali Rohár [mailto:[email protected]]
Sent: Tuesday, April 25, 2017 8:41 AM
To: Andy Shevchenko <[email protected]>
Cc: Matthew Garrett <[email protected]>; Darren Hart <[email protected]>; Andy Shevchenko <[email protected]>; Arcadiy Ivanov <[email protected]>; Limonciello, Mario <[email protected]>; Platform Driver <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] dell-laptop: Adds support for keyboard backlight timeout AC settingsQuoted 4 lines · On Tuesday 25 April 2017 16:32:36 Andy Shevchenko wrote:
Quoted 3 lines · Pali Rohár
Quoted 2 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.Quoted 8 lines
Quoted 6 lines
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
It is OK.
Pali,
Considering this is negatively affecting folks on stable kernel releases too when using this newer HW, would you consider to send to @stable too?
Thanks,
I'm fine with it, if Greg or stable maintainers approve this change.
Quoted 23 lines
Quoted 2 lines
I second that. Thanks!
In order for this to go back to stable, we will need to include the list of dependencies per stable-kernel-rules.txt. This can be done after it is merged, but if you can provide the set of Cc: stable lines needed, we can look at getting this into testing now so no further action will be required.
...
Upon closer inspection, this does fail the 100 lines including context stable rule by an additional 55 lines. This is a process issue I've been thinking about for a while and trying to find the best way to express this problem and what a viable solution might look like. As it stands, fixes such as these are effectively limited to current and future kernel versions. I do think there is a need for vendors to be able to update their drivers upstream to work with current hardware without requiring a bleeding edge kernel. Perhaps "leaf node drivers" should have a looser set of stable rules, but that is not currently the way the upstream stable kernel rules work (at least as far as I understand them).
+Greg KH who has the ultimate say on this. Greg, have I misrepresented anything here?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 58 lines · Darren Hart
Quoted 30 lines · Arcadiy Ivanov
Quoted 29 lines · On 2017-04-25 09:49, [email protected] wrote:
Quoted 29 lines
-----Original Message-----
From: Pali Rohár [mailto:[email protected]]
Sent: Tuesday, April 25, 2017 8:41 AM
To: Andy Shevchenko <[email protected]>
Cc: Matthew Garrett <[email protected]>; Darren Hart <[email protected]>; Andy Shevchenko <[email protected]>; Arcadiy Ivanov <[email protected]>; Limonciello, Mario <[email protected]>; Platform Driver <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] dell-laptop: Adds support for keyboard backlight timeout AC settingsQuoted 4 lines · On Tuesday 25 April 2017 16:32:36 Andy Shevchenko wrote:
Quoted 3 lines · Pali Rohár
Quoted 2 lines · On Tuesday 25 April 2017 15:36:56 Andy Shevchenko wrote:
On Sun, Apr 23, 2017 at 10:40 PM, Pali Rohár <[email protected]> wrote:
This patch misses few others that were applied to our testing / for-next.Quoted 8 lines
Quoted 6 lines
Ah... sorry for that :-( And I was in impression that there were fixes for that code which use mutexes... Now I know why I have not seen them!
Quoted 2 lines
I have applied it to testing with corrected conflict (easy to fix), though check if everything still as supposed to be.
Can you send a link to your fix?
Sure, here it is:
http://git.infradead.org/linux-platform-drivers-x86.git/commit/bcf7d8a30e2888f78a19778a16d3dd8c10b4b0ad
It is OK.
Quoted 9 lines
Quoted 6 lines
Pali,
Considering this is negatively affecting folks on stable kernel releases too when using this newer HW, would you consider to send to @stable too?
Thanks,
I second that. Thanks!
In order for this to go back to stable, we will need to include the list of dependencies per stable-kernel-rules.txt. This can be done after it is merged, but if you can provide the set of Cc: stable lines needed, we can look at getting this into testing now so no further action will be required.
...
Upon closer inspection, this does fail the 100 lines including context stable rule by an additional 55 lines. This is a process issue I've been thinking about for a while and trying to find the best way to express this problem and what a viable solution might look like. As it stands, fixes such as these are effectively limited to current and future kernel versions. I do think there is a need for vendors to be able to update their drivers upstream to work with current hardware without requiring a bleeding edge kernel. Perhaps "leaf node drivers" should have a looser set of stable rules, but that is not currently the way the upstream stable kernel rules work (at least as far as I understand them).
Quoted 2 lines
+Greg KH who has the ultimate say on this. Greg, have I misrepresented anything here?
Nope, I usually defer to the maintainer of the subsystem to see if the patch should be a valid stable patch or not. So if you think it should be applied, and it's a "bit" larger than normal, that's fine, no objection from me.
thanks,
greg k-h