Patch "ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI" has been added to the 4.10-stable tree

This is a note to let you know that I've just added the patch titled

ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:

     arm-dts-am57xx-idk-tpic2810-is-on-i2c-bus-not-spi.patch

and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Sekhar Nori <[email protected]>
Date: Wed, 15 Feb 2017 20:42:52 +0530
Subject: ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

From: Sekhar Nori <[email protected]>

commit f5432f01240ef69a391940d623b6a51768aefd65 upstream.

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support") added the TPIC2810 device-tree node under SPI bus instead of I2C1.

Fix it. Tested on AM572x IDK by driving on-board LEDs connected to TPIC2810

---
 arch/arm/boot/dts/am57xx-idk-common.dtsi |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

@@ -311,6 +311,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {

@@ -326,13 +333,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

Patches currently in stable-queue which might be from [email protected] are

queue-4.10/arm-dts-am57xx-idk-tpic2810-is-on-i2c-bus-not-spi.patch