Patch "ARM: tegra: paz00: Mark panel regulator as enabled on boot" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

ARM: tegra: paz00: Mark panel regulator as enabled on boot

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
arm-tegra-paz00-mark-panel-regulator-as-enabled-on-boot.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Marc Dietrich <[email protected]>
Date: Fri, 9 Dec 2016 10:20:38 +0100
Subject: ARM: tegra: paz00: Mark panel regulator as enabled on boot

From: Marc Dietrich <[email protected]>

commit 0c18927f51f4d390abdcf385bff5f995407ee732 upstream.

Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures.

---
 arch/arm/boot/dts/tegra20-paz00.dts |    1 +
 1 file changed, 1 insertion(+)

@@ -565,6 +565,7 @@
 			regulator-name = "+3VS,vdd_pnl";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
 			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/arm-tegra-paz00-mark-panel-regulator-as-enabled-on-boot.patch