spi: Drop atmel_dataflash_spi.c

From: Jagan Teki <[email protected]>

Dropped drivers/spi/atmel_dataflash_spi.c becuase of
- No 'driver model' conversion
- Similar driver be there at mtd flash side
- Flash drivers shouldn't be part of spi area
- No response for prior mail in mailing-list

Signed-off-by Jagan Teki <[email protected]>

---
Note:
- https://lists.denx.de/pipermail/u-boot/2016-August/265107.html

 board/atmel/at91sam9260ek/partition.c |   1 -
 board/atmel/at91sam9261ek/partition.c |   1 -
 drivers/spi/Makefile                  |   1 -
 drivers/spi/atmel_dataflash_spi.c     | 184 ----------------------------------
 include/configs/at91sam9260ek.h       |  15 ---
 include/configs/at91sam9261ek.h       |  15 ---
 include/configs/pm9261.h              |   1 -
 scripts/config_whitelist.txt          |   4 -
 8 files changed, 222 deletions(-)
 delete mode 100644 drivers/spi/atmel_dataflash_spi.c

The problem here is that you need to remove the boards in question as well. I see the baord maintainer was Cc'd on this email, so this is a bit stronger of a poke, as I guess we need to drop these boards..

Hi everybody,

Quoted 3 lines

The problem here is that you need to remove the boards in question as well. I see the baord maintainer was Cc'd on this email, so this is a bit stronger of a poke, as I guess we need to drop these boards..

It looks like I'm still listed as the maintainer, although I haven't been involved in u-boot development for years...

I no longer have access to any AT91 board, so if someone wants to take over, it's ok to me. Otherwise, you can mark those boards as orphaned, or remove them from the tree.

Quoted 9 lines

Hi everybody,

Quoted 3 lines

The problem here is that you need to remove the boards in question as well. I see the baord maintainer was Cc'd on this email, so this is a bit stronger of a poke, as I guess we need to drop these boards..

It looks like I'm still listed as the maintainer, although I haven't been involved in u-boot development for years...

Quoted 3 lines

I no longer have access to any AT91 board, so if someone wants to take over, it's ok to me. Otherwise, you can mark those boards as orphaned, or remove them from the tree.

Thanks Stelian. Wenyou, you've done some changes to some of these boards recently, would you care to pick them up, or should I go ahead and remove them?

Hi Tom,

Quoted 14 lines · Stelian Pop

Quoted 12 lines

Hi everybody,

Quoted 3 lines

The problem here is that you need to remove the boards in question as well. I see the baord maintainer was Cc'd on this email, so this is a bit stronger of a poke, as I guess we need to drop these boards..

It looks like I'm still listed as the maintainer, although I haven't been involved in u-boot development for years...

I no longer have access to any AT91 board, so if someone wants to take over, it's ok to me. Otherwise, you can mark those boards as orphaned, or remove them from the tree.

Quoted 2 lines

Thanks Stelian. Wenyou, you've done some changes to some of these boards recently, would you care to pick them up, or should I go ahead and remove them?

Please don't remove these boards.

We agree to drop atmel_dataflash_spi.c, and I will convert these boards by using the new dataflash driver.

Quoted 16 lines · Wenyou.Yang at microchip.com

Hi Tom,

Quoted 14 lines · Stelian Pop

Quoted 11 lines

Hi everybody,

Quoted 3 lines

The problem here is that you need to remove the boards in question as well. I see the baord maintainer was Cc'd on this email, so this is a bit stronger of a poke, as I guess we need to drop these boards..

It looks like I'm still listed as the maintainer, although I haven't been involved in u-boot development for years...

I no longer have access to any AT91 board, so if someone wants to take over, it's ok to me. Otherwise, you can mark those boards as orphaned, or remove them from the tree.

Thanks Stelian. Wenyou, you've done some changes to some of these boards recently, would you care to pick them up, or should I go ahead and remove them?

Quoted 4 lines

Please don't remove these boards.

We agree to drop atmel_dataflash_spi.c, and I will convert these boards by using the new dataflash driver.

Please do the conversion and then we can drop the old file (otherwise the build fails), and please send a patch updating the MAINTAINERS file soon, thanks!

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot