Patch "usb: musb: Fix trying to suspend while active for OTG configurations" has been added to the 4.11-stable tree

This is a note to let you know that I've just added the patch titled

usb: musb: Fix trying to suspend while active for OTG configurations

to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-musb-fix-trying-to-suspend-while-active-for-otg-configurations.patch
and it can be found in the queue-4.11 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Tony Lindgren <[email protected]>
Date: Wed, 17 May 2017 11:23:10 -0500
Subject: usb: musb: Fix trying to suspend while active for OTG configurations

From: Tony Lindgren <[email protected]>

commit 3c50ffef25855a9d9e4b07b02d756a8cdd653069 upstream.

Commit d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active".

For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine.

Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode.

---
 drivers/usb/musb/musb_host.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

@@ -2780,10 +2780,11 @@ int musb_host_setup(struct musb *musb, i
 	int ret;
 	struct usb_hcd *hcd = musb->hcd;
 
-	MUSB_HST_MODE(musb);
-	musb->xceiv->otg->default_a = 1;
-	musb->xceiv->otg->state = OTG_STATE_A_IDLE;
-
+	if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv->otg->default_a = 1;
+		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+	}
 	otg_set_host(musb->xceiv->otg, &hcd->self);
 	hcd->self.otg_port = 1;
 	musb->xceiv->otg->host = &hcd->self;

Patches currently in stable-queue which might be from [email protected] are

queue-4.11/usb-musb-fix-trying-to-suspend-while-active-for-otg-configurations.patch queue-4.11/usb-musb-tusb6010_omap-do-not-reset-the-other-direction-s-packet-size.patch