Patch "usb: musb: tusb6010_omap: Do not reset the other direction's packet size" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

usb: musb: tusb6010_omap: Do not reset the other direction's packet size

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-musb-tusb6010_omap-do-not-reset-the-other-direction-s-packet-size.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Peter Ujfalusi <[email protected]>
Date: Wed, 17 May 2017 11:23:11 -0500
Subject: usb: musb: tusb6010_omap: Do not reset the other direction's packet size

From: Peter Ujfalusi <[email protected]>

commit 6df2b42f7c040d57d9ecb67244e04e905ab87ac6 upstream.

We have one register for each EP to set the maximum packet size for both TX and RX.
If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

---
 drivers/usb/musb/tusb6010_omap.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

@@ -220,6 +220,7 @@ static int tusb_omap_dma_program(struct
 	u32				dma_remaining;
 	int				src_burst, dst_burst;
 	u16				csr;
+	u32				psize;
 	int				ch;
 	s8				dmareq;
 	s8				sync_dev;

@@ -391,15 +392,19 @@ static int tusb_omap_dma_program(struct
 
 	if (chdat->tx) {
 		/* Send transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~0x7ff;
+		psize |= chdat->transfer_packet_sz;
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
 	} else {
 		/* Receive transfer_packet_sz packets at a time */
-		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
-			chdat->transfer_packet_sz << 16);
+		psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+		psize &= ~(0x7ff << 16);
+		psize |= (chdat->transfer_packet_sz << 16);
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
 
 		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
 			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/usb-musb-tusb6010_omap-do-not-reset-the-other-direction-s-packet-size.patch