sunxi: Rename bananapi board as bananapi m1
Subsystems (2)
PATCH v2 1/2 sunxi: Rename bananapi board as bananapi m1
From: Jagan Teki <[email protected]>
from BPI(BIPAI KEJI LIMITED) products the Bananapi board is named as 'Bananapi M1' and this is the starting bananapi board from M1 series.
So rename the board defconfig, dts and suffix 'M1' on model for the same so-that next sequence on bananapi starts like M1 Plus, M2 and so.on
Cc Icenowy Zheng <[email protected]>
Signed-off-by Jagan Teki <[email protected]>
---
Changes for v2:
- Newly added patch
arch/arm/dts/sun7i-a20-bananapi-m1.dts | 293 +++++++++++++++++++++++++++++++++ arch/arm/dts/sun7i-a20-bananapi.dts | 293 --------------------------------- board/sunxi/MAINTAINERS | 2 +- configs/Bananapi_M1_defconfig | 23 +++ configs/Bananapi_defconfig | 23 --- 5 files changed, 317 insertions(+), 317 deletions(-) create mode 100644 arch/arm/dts/sun7i-a20-bananapi-m1.dts delete mode 100644 arch/arm/dts/sun7i-a20-bananapi.dts create mode 100644 configs/Bananapi_M1_defconfig delete mode 100644 configs/Bananapi_defconfig
arch/arm/dts/sun7i-a20-bananapi-m1.dts new file +293 -0
@@ -0,0 +1,293 @@ +/* + * Copyright 2014 Hans de Goede <[email protected]> + * + * Hans de Goede <[email protected]> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "LeMaker Banana Pi M1"; + compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; + + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1350000 + 720000 1250000 + 528000 1150000 + 312000 1100000 + 144000 1050000 + >; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic at 34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin at 0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + gmac_power_pin_bananapi: gmac_power_pin at 0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bananapi: led_pins at 0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +};
arch/arm/dts/sun7i-a20-bananapi.dts deleted +0 -293
293 lines not on this page · raw message
board/sunxi/MAINTAINERS +1 -1
@@ -44,7 +44,7 @@ F: configs/Mele_M9_defconfig F: configs/Sinovoip_BPI_M2_defconfig F: include/configs/sun7i.h F: configs/A20-OLinuXino_MICRO_defconfig -F: configs/Bananapi_defconfig +F: configs/Bananapi_M1_defconfig F: configs/Bananapro_defconfig F: configs/i12-tvbox_defconfig F: configs/Linksprite_pcDuino3_defconfig
configs/Bananapi_M1_defconfig new file +23 -0
@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 +CONFIG_MACPWR="PH23" +CONFIG_VIDEO_COMPOSITE=y +CONFIG_GMAC_TX_DELAY=3 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_NETCONSOLE=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_USB_EHCI_HCD=y
configs/Bananapi_defconfig deleted +0 -23
@@ -1,23 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN7I=y -CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" -CONFIG_VIDEO_COMPOSITE=y -CONFIG_GMAC_TX_DELAY=3 -CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" -CONFIG_AHCI=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL=y -CONFIG_SPL_I2C_SUPPORT=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_SPL_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_NETCONSOLE=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_SUN7I_GMAC=y -CONFIG_USB_EHCI_HCD=y
Signature · 1 line
1.9.1
PATCH v2 2/2 sunxi: Use proper naming convention for Bananapi boards
From: Jagan Teki <[email protected]>
Since Bananapi brand is owned by BIPAI KEJI(BPI)
- Drop vendor prefix 'Sinovoip' for defconfig names
- Drop Board name 'SINOVOIP' in MAINTAINERS file
- Use small letters for defconfig files, since newly supported and/or longer stable defconfigs follow lower-case letters.
Cc Icenowy Zheng <[email protected]>
Cc Chen-Yu Tsai <[email protected]>
Cc VishnuPatekar <[email protected]>
Signed-off-by Jagan Teki <[email protected]>
---
Changes for v2:
- Drop Sinovoip and SINOVOIP vendor prefix since bananapi brand no longer used.
board/sunxi/MAINTAINERS | 14 +++++++------- configs/Bananapi_M1_defconfig | 23 ----------------------- configs/Bananapi_M2_Ultra_defconfig | 18 ------------------ configs/Sinovoip_BPI_M2_Plus_defconfig | 20 -------------------- configs/Sinovoip_BPI_M2_defconfig | 22 ---------------------- configs/Sinovoip_BPI_M3_defconfig | 29 ----------------------------- configs/bananapi_m1_defconfig | 23 +++++++++++++++++++++++ configs/bananapi_m2_defconfig | 22 ++++++++++++++++++++++ configs/bananapi_m2_plus_defconfig | 20 ++++++++++++++++++++ configs/bananapi_m2_ultra_defconfig | 18 ++++++++++++++++++ configs/bananapi_m3_defconfig | 29 +++++++++++++++++++++++++++++ 11 files changed, 119 insertions(+), 119 deletions(-) delete mode 100644 configs/Bananapi_M1_defconfig delete mode 100644 configs/Bananapi_M2_Ultra_defconfig delete mode 100644 configs/Sinovoip_BPI_M2_Plus_defconfig delete mode 100644 configs/Sinovoip_BPI_M2_defconfig delete mode 100644 configs/Sinovoip_BPI_M3_defconfig create mode 100644 configs/bananapi_m1_defconfig create mode 100644 configs/bananapi_m2_defconfig create mode 100644 configs/bananapi_m2_plus_defconfig create mode 100644 configs/bananapi_m2_ultra_defconfig create mode 100644 configs/bananapi_m3_defconfig
board/sunxi/MAINTAINERS +7 -7
@@ -41,10 +41,10 @@ F: configs/CSQ_CS908_defconfig F: configs/inet_q972_defconfig F: configs/Mele_A1000G_quad_defconfig F: configs/Mele_M9_defconfig -F: configs/Sinovoip_BPI_M2_defconfig +F: configs/bananapi_m2_defconfig F: include/configs/sun7i.h F: configs/A20-OLinuXino_MICRO_defconfig -F: configs/Bananapi_M1_defconfig +F: configs/bananapi_m1_defconfig F: configs/Bananapro_defconfig F: configs/i12-tvbox_defconfig F: configs/Linksprite_pcDuino3_defconfig
@@ -111,7 +111,7 @@ F: configs/Ampe_A76_defconfig BANANAPI M2 ULTRA BOARD M: Chen-Yu Tsai <[email protected]> S: Maintained -F: configs/Bananapi_M2_Ultra_defconfig +F: configs/bananapi_m2_ultra_defconfig F: arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts COLOMBUS BOARD
@@ -284,15 +284,15 @@ S: Maintained F: configs/Sinlinx_SinA33_defconfig W: http://linux-sunxi.org/Sinlinx_SinA33 -SINOVOIP BPI M2 PLUS H3 BOARD +BPI M2 PLUS H3 BOARD M: Icenowy Zheng <[email protected]> S: Maintained -F: configs/Sinovoip_BPI_M2_Plus_defconfig +F: configs/bananapi_m2_plus_defconfig -SINOVOIP BPI M3 A83T BOARD +BPI M3 A83T BOARD M: VishnuPatekar <[email protected]> S: Maintained -F: configs/Sinovoip_BPI_M3_defconfig +F: configs/bananapi_m3_defconfig SUNCHIP CX-A99 BOARD M: Rask Ingemann Lambertsen <[email protected]>
configs/Bananapi_M1_defconfig deleted +0 -23
@@ -1,23 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN7I=y -CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" -CONFIG_VIDEO_COMPOSITE=y -CONFIG_GMAC_TX_DELAY=3 -CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1" -CONFIG_AHCI=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL=y -CONFIG_SPL_I2C_SUPPORT=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_SPL_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_NETCONSOLE=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_SUN7I_GMAC=y -CONFIG_USB_EHCI_HCD=y
configs/Bananapi_M2_Ultra_defconfig deleted +0 -18
@@ -1,18 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN8I_R40=y -CONFIG_DRAM_CLK=576 -CONFIG_DRAM_ZQ=3881979 -CONFIG_DRAM_ODT_EN=y -CONFIG_MMC0_CD_PIN="PH13" -CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra" -CONFIG_AHCI=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL=y -CONFIG_SPL_I2C_SUPPORT=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -CONFIG_AXP_DLDO4_VOLT=2500 -CONFIG_AXP_ELDO3_VOLT=1200
configs/Sinovoip_BPI_M2_Plus_defconfig deleted +0 -20
@@ -1,20 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN8I_H3=y -CONFIG_DRAM_CLK=672 -CONFIG_DRAM_ZQ=3881979 -CONFIG_DRAM_ODT_EN=y -CONFIG_MACPWR="PD6" -CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus" -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CONSOLE_MUX=y -CONFIG_SPL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_SPL_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SUN8I_EMAC=y -CONFIG_USB_EHCI_HCD=y
configs/Sinovoip_BPI_M2_defconfig deleted +0 -22
@@ -1,22 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN6I=y -CONFIG_DRAM_CLK=432 -CONFIG_USB1_VBUS_PIN="" -CONFIG_USB2_VBUS_PIN="" -CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2" -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_SPL_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_SUN7I_GMAC=y -CONFIG_AXP_ALDO1_VOLT=3300 -CONFIG_AXP_ALDO2_VOLT=1800 -CONFIG_AXP_DLDO1_VOLT=3000 -CONFIG_USB_EHCI_HCD=y
configs/Sinovoip_BPI_M3_defconfig deleted +0 -29
@@ -1,29 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN8I_A83T=y -CONFIG_DRAM_TYPE=7 -CONFIG_DRAM_CLK=480 -CONFIG_DRAM_ZQ=15355 -CONFIG_DRAM_ODT_EN=y -CONFIG_INITIAL_USB_SCAN_DELAY=500 -CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" -CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" -CONFIG_USB0_ID_DET="PH11" -CONFIG_USB1_VBUS_PIN="PD24" -CONFIG_AXP_GPIO=y -CONFIG_SATAPWR="PD25" -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3" -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CONSOLE_MUX=y -CONFIG_SPL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_SPL_DOS_PARTITION is not set -# CONFIG_SPL_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_AXP_DCDC5_VOLT=1200 -CONFIG_AXP_DLDO3_VOLT=2500 -CONFIG_AXP_SW_ON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_HOST=y
configs/bananapi_m1_defconfig new file +23 -0
@@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 +CONFIG_MACPWR="PH23" +CONFIG_VIDEO_COMPOSITE=y +CONFIG_GMAC_TX_DELAY=3 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_NETCONSOLE=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_USB_EHCI_HCD=y
configs/bananapi_m2_defconfig new file +22 -0
@@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_DRAM_CLK=432 +CONFIG_USB1_VBUS_PIN="" +CONFIG_USB2_VBUS_PIN="" +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_AXP_ALDO1_VOLT=3300 +CONFIG_AXP_ALDO2_VOLT=1800 +CONFIG_AXP_DLDO1_VOLT=3000 +CONFIG_USB_EHCI_HCD=y
configs/bananapi_m2_plus_defconfig new file +20 -0
@@ -0,0 +1,20 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_MACPWR="PD6" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y
configs/bananapi_m2_ultra_defconfig new file +18 -0
@@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_R40=y +CONFIG_DRAM_CLK=576 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_MMC0_CD_PIN="PH13" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP_DLDO4_VOLT=2500 +CONFIG_AXP_ELDO3_VOLT=1200
configs/bananapi_m3_defconfig new file +29 -0
@@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A83T=y +CONFIG_DRAM_TYPE=7 +CONFIG_DRAM_CLK=480 +CONFIG_DRAM_ZQ=15355 +CONFIG_DRAM_ODT_EN=y +CONFIG_INITIAL_USB_SCAN_DELAY=500 +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH11" +CONFIG_USB1_VBUS_PIN="PD24" +CONFIG_AXP_GPIO=y +CONFIG_SATAPWR="PD25" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_AXP_DCDC5_VOLT=1200 +CONFIG_AXP_DLDO3_VOLT=2500 +CONFIG_AXP_SW_ON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_HOST=y
Signature · 1 line
1.9.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/2 sunxi: Rename bananapi board as bananapi m1
Hi,
Quoted 13 lines · Karsten Merker
Quoted 9 lines · Jagan Teki
From: Jagan Teki <[email protected]>
from BPI(BIPAI KEJI LIMITED) products the Bananapi board is named as 'Bananapi M1' and this is the starting bananapi board from M1 series.
So rename the board defconfig, dts and suffix 'M1' on model for the same so-that next sequence on bananapi starts like M1 Plus, M2 and so.on
Hello,
Quoted 7 lines
the equivalent change in the kernel has been NACKed by me as with the proposed change the installation of a newer kernel would break a large number of existing end user systems (which rely on the old dts file name and on the old model string).
U-Boot should keep the same dts as the kernel, so this effectively means a NACK to this change for u-boot as well.
Do the distros also keep a list of defconfig targets to build for U-boot? It seems that way for Debian. I imagine just changing the defconfig names would be troublesome for the maintainers.
ChenYu
PATCH v2 1/2 sunxi: Rename bananapi board as bananapi m1
Quoted 21 lines · Chen-Yu Tsai
Hi,
Quoted 18 lines · Karsten Merker
Quoted 9 lines · Jagan Teki
From: Jagan Teki <[email protected]>
from BPI(BIPAI KEJI LIMITED) products the Bananapi board is named as 'Bananapi M1' and this is the starting bananapi board from M1 series.
So rename the board defconfig, dts and suffix 'M1' on model for the same so-that next sequence on bananapi starts like M1 Plus, M2 and so.on
Hello,
the equivalent change in the kernel has been NACKed by me as with the proposed change the installation of a newer kernel would break a large number of existing end user systems (which rely on the old dts file name and on the old model string).
Quoted 7 lines
Quoted 2 lines
U-Boot should keep the same dts as the kernel, so this effectively means a NACK to this change for u-boot as well.
Do the distros also keep a list of defconfig targets to build for U-boot? It seems that way for Debian. I imagine just changing the defconfig names would be troublesome for the maintainers.
Not only the distros, but all the buildsystems too. This is really something we shouldn't change, ever.
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170530/1d8939db/attachment.sig>