Board: Add Engicam i.MX6 SOMs
v3 cover Board: Add Engicam i.MX6 SOMs
From: Jagan Teki <[email protected]>
This series add buildroot support for Engicam i.MX6 SOM's
- i.CoreM6 DualLite/Solo
- i.CoreM6 RQS
- GEAM6UL
- Is.IoT MX6UL
Jagan Teki (6):
board: Add support for Engicam i.CoreM6 DualLite/Solo boards
board: engicam: Rename defconfig engicam_imx6qdl_icore_mmc_defconfig
board: Add support for Engicam i.CoreM6 RQS SOM
board: engicam: Add icorem6 for i.CoreM6 support
board: Add support for Engicam GEAM6UL SOM
board: Add support for Engicam Is.IoT MX6UL SOM
DEVELOPERS | 5 +-
board/engicam/geam6ul/genimage.cfg | 38 ++++++++++++
board/engicam/geam6ul/readme.txt | 65 +++++++++++++++++++++
board/engicam/{ => icorem6}/genimage.cfg | 1 +
board/engicam/{ => icorem6}/readme.txt | 20 ++++---
board/engicam/icorem6_rqs/genimage.cfg | 39 +++++++++++++
board/engicam/icorem6_rqs/readme.txt | 68 ++++++++++++++++++++++
board/engicam/isiot/genimage.cfg | 38 ++++++++++++
board/engicam/isiot/readme.txt | 65 +++++++++++++++++++++
...fconfig => engicam_imx6qdl_icore_mmc_defconfig} | 12 ++--
configs/engicam_imx6qdl_icore_rqs_mmc_defconfig | 41 +++++++++++++
configs/engicam_imx6ul_geam_mmc_defconfig | 41 +++++++++++++
configs/engicam_imx6ul_isiot_mmc_defconfig | 41 +++++++++++++
13 files changed, 458 insertions(+), 16 deletions(-)
create mode 100644 board/engicam/geam6ul/genimage.cfg
create mode 100644 board/engicam/geam6ul/readme.txt
rename board/engicam/{ => icorem6}/genimage.cfg (95%)
rename board/engicam/{ => icorem6}/readme.txt (72%)
create mode 100644 board/engicam/icorem6_rqs/genimage.cfg
create mode 100644 board/engicam/icorem6_rqs/readme.txt
create mode 100644 board/engicam/isiot/genimage.cfg
create mode 100644 board/engicam/isiot/readme.txt
rename configs/{engicam_imx6q_icore_defconfig => engicam_imx6qdl_icore_mmc_defconfig} (69%)
create mode 100644 configs/engicam_imx6qdl_icore_rqs_mmc_defconfig
create mode 100644 configs/engicam_imx6ul_geam_mmc_defconfig
create mode 100644 configs/engicam_imx6ul_isiot_mmc_defconfigSignature · 1 line
2.7.4
PATCH v3 1/6 board: Add support for Engicam i.CoreM6 DualLite/Solo boards
From: Jagan Teki <[email protected]>
Add initial support for Engicam i.CoreM6 DualLite/Solo board with below features:
- U-Boot 2017.05-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.05-rc1 has common u-boot defconfig for All i.CoreM6 variant boards, so this patch update the same along with buildroot defconfig that reflect the common name.
---
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt
- Remove exctra " in BR2_LINUX_KERNEL_INTREE_DTS_NAME
DEVELOPERS | 2 +-
board/engicam/genimage.cfg | 1 +
board/engicam/readme.txt | 6 ++++--
...m_imx6q_icore_defconfig => engicam_imx6qdl_icore_defconfig} | 10 +++++-----
4 files changed, 11 insertions(+), 8 deletions(-)
rename configs/{engicam_imx6q_icore_defconfig => engicam_imx6qdl_icore_defconfig} (74%)DEVELOPERS +1 -1
@@ -829,7 +829,7 @@ F: package/keepalived/ N: Jagan Teki <[email protected]> F: board/engicam/ -F: configs/engicam_imx6q_icore_defconfig +F: configs/engicam_imx6qdl_icore_defconfig N: James Knight <[email protected]> F: package/atkmm/
board/engicam/genimage.cfg +1 -0
@@ -2,6 +2,7 @@ image boot.vfat { vfat { files = { "uImage", + "imx6dl-icore.dtb", "imx6q-icore.dtb" } }
board/engicam/readme.txt +4 -2
@@ -5,7 +5,7 @@ Buildroot for Engicam i.MX6 SOM platforms: This file documents the Buildroot support for all Engicam i.MX6 SOM platform boards. -i.CoreM6 Quad/Dual SOM Starter kits: +i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits: https://www.engicam.com/vis-prod/101120 This configuration uses U-Boot mainline and kernel mainline.
@@ -17,7 +17,7 @@ First, configure Buildroot for the Engicam i.MX SOM's: - for i.CoreM6 Quad/Dual: - make engicam_imx6q_icore_defconfig + make engicam_imx6qdl_icore_defconfig Build all components:
@@ -26,6 +26,8 @@ Build all components: You will find the following files in output/images/: - for i.CoreM6 Quad/Dual: - imx6q-icore.dtb +- for i.CoreM6 DualLite/Solo: + - imx6dl-icore.dtb - rootfs.ext4 - rootfs.tar - sdcard.img
configs/engicam_imx6qdl_icore_defconfig renamed from configs/engicam_imx6q_icore_defconfig +5 -5
@@ -14,8 +14,8 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6q_icore_mmc" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05-rc1" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
@@ -25,15 +25,15 @@ BR2_TARGET_UBOOT_SPL_NAME="SPL" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-icore" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore" # Filesystem -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual Starter Kit" +BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo Starter Kit" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 1 line
2.7.4
PATCH v3 2/6 board: engicam: Rename defconfig engicam_imx6qdl_icore_mmc_defconfig
In reply to Jagan TekiFrom: Jagan Teki <[email protected]>
Since the board have support for nand, better to explicitly name it with mmc.
engicam_imx6qdl_icore_defconfig => engicam_imx6qdl_icore_mmc_defconfig
---
Changes for v3:
- none
Changes for v2:
- Fix genimage.cfg path in readme.txt
DEVELOPERS | 2 +-
board/engicam/readme.txt | 2 +-
...icam_imx6qdl_icore_defconfig => engicam_imx6qdl_icore_mmc_defconfig} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename configs/{engicam_imx6qdl_icore_defconfig => engicam_imx6qdl_icore_mmc_defconfig} (100%)DEVELOPERS +1 -1
@@ -829,7 +829,7 @@ F: package/keepalived/ N: Jagan Teki <[email protected]> F: board/engicam/ -F: configs/engicam_imx6qdl_icore_defconfig +F: configs/engicam_imx6qdl_icore_mmc_defconfig N: James Knight <[email protected]> F: package/atkmm/
board/engicam/readme.txt +1 -1
@@ -17,7 +17,7 @@ First, configure Buildroot for the Engicam i.MX SOM's: - for i.CoreM6 Quad/Dual: - make engicam_imx6qdl_icore_defconfig + make engicam_imx6qdl_icore_mmc_defconfig Build all components:
configs/engicam_imx6qdl_icore_mmc_defconfig renamed from configs/engicam_imx6qdl_icore_defconfig +0 -0
Signature · 1 line
2.7.4
PATCH v3 3/6 board: Add support for Engicam i.CoreM6 RQS SOM
In reply to Jagan TekiFrom: Jagan Teki <[email protected]>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
---
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt
DEVELOPERS | 1 + board/engicam/icorem6_rqs/genimage.cfg | 39 ++++++++++++++ board/engicam/icorem6_rqs/readme.txt | 68 +++++++++++++++++++++++++ configs/engicam_imx6qdl_icore_rqs_mmc_defconfig | 41 +++++++++++++++ 4 files changed, 149 insertions(+) create mode 100644 board/engicam/icorem6_rqs/genimage.cfg create mode 100644 board/engicam/icorem6_rqs/readme.txt create mode 100644 configs/engicam_imx6qdl_icore_rqs_mmc_defconfig
DEVELOPERS +1 -0
@@ -830,6 +830,7 @@ F: package/keepalived/ N: Jagan Teki <[email protected]> F: board/engicam/ F: configs/engicam_imx6qdl_icore_mmc_defconfig +F: configs/engicam_imx6qdl_icore_rqs_mmc_defconfig N: James Knight <[email protected]> F: package/atkmm/
board/engicam/icorem6_rqs/genimage.cfg new file +39 -0
@@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6dl-icore-rqs.dtb", + "imx6q-icore-rqs.dtb" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +}
board/engicam/icorem6_rqs/readme.txt new file +68 -0
68 lines not on this page · raw message
configs/engicam_imx6qdl_icore_rqs_mmc_defconfig new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 4/6 board: engicam: Add icorem6 for i.CoreM6 support
In reply to Jagan TekiFrom: Jagan Teki <[email protected]>
Create board/engicam/icorem6 for i.CoreM6 supported files. and update the readme.txt so-that it can list i.CoreM6 board details.
---
Changes for v3:
- Use kernel version 4.11.5
Changes for v2:
- Fix genimage.cfg path in readme.txt
board/engicam/{ => icorem6}/genimage.cfg | 0
board/engicam/{ => icorem6}/readme.txt | 14 +++++++-------
configs/engicam_imx6qdl_icore_mmc_defconfig | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
rename board/engicam/{ => icorem6}/genimage.cfg (100%)
rename board/engicam/{ => icorem6}/readme.txt (81%)board/engicam/icorem6/genimage.cfg renamed from board/engicam/genimage.cfg +0 -0
board/engicam/icorem6/readme.txt renamed from board/engicam/readme.txt +7 -7
@@ -1,8 +1,8 @@ -***************************************** -Buildroot for Engicam i.MX6 SOM platforms: -***************************************** +********************************************* +Buildroot for Engicam i.CoreM6 SOM platforms: +********************************************* -This file documents the Buildroot support for all Engicam i.MX6 SOM +This file documents the Buildroot support for Engicam i.CoreM6 platform boards. i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
@@ -13,9 +13,9 @@ This configuration uses U-Boot mainline and kernel mainline. Build ===== -First, configure Buildroot for the Engicam i.MX SOM's: +First, configure Buildroot for the Engicam i.CoreM6: -- for i.CoreM6 Quad/Dual: +- for i.CoreM6 Quad/Dual/DualLite/Solo: make engicam_imx6qdl_icore_mmc_defconfig
@@ -52,7 +52,7 @@ command as root: *** WARNING! This will destroy all the card content. Use with care! *** For details about the medium image layout, see the definition in -board/engicam/genimage.cfg +board/engicam/icorem6/genimage.cfg Boot the i.CoreM6 boards with SD boot: =====================================
configs/engicam_imx6qdl_icore_mmc_defconfig +1 -1
@@ -38,4 +38,4 @@ BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/genimage.cfg" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
Signature · 1 line
2.7.4
PATCH v3 5/6 board: Add support for Engicam GEAM6UL SOM
In reply to Jagan TekiFrom: Jagan Teki <[email protected]>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
---
Changes for v3:
- Use kernel version 4.11.5
- Fix readme.txt file
Changes for v2:
- Fix genimage.cfg path in readme.txt
DEVELOPERS | 1 + board/engicam/geam6ul/genimage.cfg | 38 ++++++++++++++++++ board/engicam/geam6ul/readme.txt | 65 +++++++++++++++++++++++++++++++ configs/engicam_imx6ul_geam_mmc_defconfig | 41 +++++++++++++++++++ 4 files changed, 145 insertions(+) create mode 100644 board/engicam/geam6ul/genimage.cfg create mode 100644 board/engicam/geam6ul/readme.txt create mode 100644 configs/engicam_imx6ul_geam_mmc_defconfig
DEVELOPERS +1 -0
@@ -831,6 +831,7 @@ N: Jagan Teki <[email protected]> F: board/engicam/ F: configs/engicam_imx6qdl_icore_mmc_defconfig F: configs/engicam_imx6qdl_icore_rqs_mmc_defconfig +F: configs/engicam_imx6ul_geam_mmc_defconfig N: James Knight <[email protected]> F: package/atkmm/
board/engicam/geam6ul/genimage.cfg new file +38 -0
@@ -0,0 +1,38 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6ul-geam-kit.dtb" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +}
board/engicam/geam6ul/readme.txt new file +65 -0
65 lines not on this page · raw message
configs/engicam_imx6ul_geam_mmc_defconfig new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 6/6 board: Add support for Engicam Is.IoT MX6UL SOM
In reply to Jagan TekiFrom: Jagan Teki <[email protected]>
Add initial support for Engicam Is.IoT MX6UL SOM board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
---
Changes for v3:
- Newly added patch
DEVELOPERS | 1 + board/engicam/isiot/genimage.cfg | 38 +++++++++++++++++ board/engicam/isiot/readme.txt | 65 ++++++++++++++++++++++++++++++ configs/engicam_imx6ul_isiot_mmc_defconfig | 41 +++++++++++++++++++ 4 files changed, 145 insertions(+) create mode 100644 board/engicam/isiot/genimage.cfg create mode 100644 board/engicam/isiot/readme.txt create mode 100644 configs/engicam_imx6ul_isiot_mmc_defconfig
DEVELOPERS +1 -0
@@ -832,6 +832,7 @@ F: board/engicam/ F: configs/engicam_imx6qdl_icore_mmc_defconfig F: configs/engicam_imx6qdl_icore_rqs_mmc_defconfig F: configs/engicam_imx6ul_geam_mmc_defconfig +F: configs/engicam_imx6ul_isiot_mmc_defconfig N: James Knight <[email protected]> F: package/atkmm/
board/engicam/isiot/genimage.cfg new file +38 -0
@@ -0,0 +1,38 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6ul-isiot-emmc.dtb" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +}
board/engicam/isiot/readme.txt new file +65 -0
65 lines not on this page · raw message
configs/engicam_imx6ul_isiot_mmc_defconfig new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.7.4